• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.345-345
• /
• 2014

최근 디스플레이 기술은 급속도로 발전해 가고 있다. 정보화 기술의 발전으로 언제 어디서나 쉽게 정보를 얻을 수 있는 유비쿼터스 시대로 접근하고 있으며, 휴대가 간편하고 이동성을 가진 휴대용 기기가 인기를 끌고 있다. 이에 따라 더 얇고 더 가벼우며 휴대하기 쉬운 디스플레이가 요구 되고 있고, 더 나아가 떨어뜨려도 깨지지 않고 유연하며, 디자인 변형이 자유로우며, 때론 종이처럼 접거나 휘어지거나 두루마리처럼 말을 수 있는 이른바 "플렉서블 디스플레이"에 대한 필요성이 점점 대두되고 있다. 이러한 첨단 디스플레이의 핵심 소자 중 하나는 산화물 박막 트랜지스터 이다. 산화물 반도체는 넓은 밴드갭을 가지고 가시광선 영역에서 투명하며, 높은 이동도를 가지고 있어 차세대 평판디스플레이, 투명디스플레이 및 플렉서블 디스플레이용 박막트랜지스터(TFT)를 위한 채널층으로써 광범위하게 연구되고 있다. 하지만 현재 대부분의 산화물 박막 트랜지스터 제조 공정은 고온에서의 열처리를 필요로 한다. 고온에서의 열처리 공정은 산화물 박막의 제조 공정 단가를 증가시키는 문제점이 있으며, 산화물 박막이 형성되는 기판의 녹는점이 낮은 경우에는 상기 기판의 변형을 가져오므로(예를 들면, 플라스틱 기판, 섬유 기재 등), 상기 산화물 박막이 적용되는 기판의 종류에 제한이 생기는 문제점이 있었다. 이에 플렉시블 디스플레이 등을 위해서는 저온공정이 필수로 선행 되어야 한다. 산화물 TFT는 당초, ZnO계의 재료가 연구되었지만 2004년 말에 Hosono 그룹이 Nature지에 "IGZO (In, Ga, Zn, O)"을 사용한 TFT를 보고한 이후 IGZO, IZO, ISZO, IYZO, HIZO와 같은 투명 산화물반도체가 TFT의 채널물질로써 많이 거론되고 있다. 그 중에서 인듐갈륨 산화물(IGO)는 삼성분계 n-형 산화물 반도체이고, 채널 이동성이 좋고 광투과도가 우수해 투명 TFT에 매우 유용하게 사용할 수 있다. 이 실험에서 우리는 인듐갈륨 산화물 박막 및 트랜지스터 특성 연구를 진행하였다. 인듐갈륨 산화물 박막은 상온에서 rf-magnetron sputtering법을 사용하여 산소분압 1~10%에서 증착 되었다. 증착된 인듐갈륨 산화물 박막은 cubic $In_2O_3$ 다결정으로 나타났으며, 2차상은 관찰 되지 않았다. 산소분압이 10%에서 1%로 변함에 따라 박막의 전도도는 $2.65{\times}10^{-6}S/cm$에서 5.38S/cm 범위에서 조절되었으며, 이를 바탕으로 인듐갈륨 박막을 active층으로 사용하는 bottom gate 구조의 박막트랜지스터를 제작 하였다. 인듐갈륨산화물 박막트랜지스터는 산소분압 10%에서 on/off 비 ${\sim}10^8$, field-effect mobility $24cm^2/V{\cdot}S$를 나타내며 상온에서 플렉서블용 고 이동도 소자 제작의 가능성을 보여준다.

• Applied Microscopy
• /
• v.31 no.2
• /
• pp.157-165
• /
• 2001

Sertoli cells in the normal adult testis are nondividing cells, which are relatively inconspicuous on cross section of the seminiferous tubule and comprise about 10% to 15% of the tubular cellular elements. Ultrastructurally, Sertoli cells have characteristic nucleoli, plasma membrane, and cytoplasmic components. The plasma membrane has two types of intercellular junctions which are developed at puberty: junctions between adjacent Sertoli cells and Sertoli cell-germ ceil junction. However, the ultrastructural findings of Sertoli cells in human fetus is not fully elucidate yet. In the present study, human fetal testes ($14\sim27$ weeks) obtained from artificially induced abortions legally without gross malformation were studied using transmission electron microscopy to make clear the differentiation process of Sertoli cells in human. In human fetal testes from 14 weeks to 27 weeks, the cell junctions of Sertoli-germ cells and Sertoli-Sertoli cells are desmosome like structure and not tight junction or desmosome. The Overall intracytoplasmic organelles of Sertoli cells are relatively sparse. The mitochondrias are relatively abundant but no developed cristae. And the rough endoplasmic reticuli are abundant and smooth endoplasmic reticuli are sparse. The amount of lipid droplets are regularly observed in human fetal Sertoli cells. No microfilaments or Charcot-Bottcher's crystalloids are present. From the results, Sertoli cells in human fetal testes are somewhat different ultrastructural findings with puberty or adult. However, to make clear the differentiation process of Sertoli cells in human, further study for 28 weeks to puberty is required.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.1
• /
• pp.277-290
• /
• 1995

The study was carried out to analyze the fracture behavior and the acoustic emission(AE) characteristics and to find the relationship among tensile strength, fracture toughness and cure pressure in owe process of the carbon fiber reinforced composites of two types, $[0^{\circ}/90^{\circ}]_{2S}$ and $[0^{\circ}\;_2/90^{\circ}\;_2]_S$. AE signals were detected during the curing process, tensile tests and fracture toughness tests by acoustic emission(AE) measurements, respectively. Tensile strengths showed that the less cure pressurizing steps and the side of $[0^{\circ}/90^{\circ}]_{2S}$ specimens had the higher strengths than those of the others. Fracture toughness by the change of test temperature showed nearly same values in the same temperature region, but the higher test temperature had the lower fracture toughness values. In order to examine the relationship between fracture behavior of CFRP in tensile and fracture toughness tests and AE signals, the post processing for AE parameters of AE data and the observations of microscope and SEM have been carried out respectively.

• Journal of Life Science
• /
• v.16 no.5
• /
• pp.834-839
• /
• 2006

This study was carried out to investigate changes in cell wall components and solubilization and depolymerization of pectin and neutral sugar polymers during softening of 'Tsugaru' apples. Pectic polysaccharides were solubilized in different solvents, distilled-water, 0.05 M CDTA, 0.05 M $Na_2CO_3$, and 8 M KOH, from cell wall materials during fruit softening. The uronic acid contents in distilled-water fraction rapidly increased along with fruit softening at 4 weeks after ambient storage. In the change of non-cellulosic neutral sugars in the cell wall of ‘Tsugaru’ fruits, the major sugar was galactose and arabinose in distilled-water, 0.05 M CDTA and 0.05 M $Na_2CO_3$ soluble fractions, and it was glucose, galactose and xylose in 8 M KOH fraction. Especially the change of galactose contents in distilled-water fraction was increased greatly along with fruit softening. When uronic acid polymers (UAP) and carbohydrate polymers (CP) in distilled-water fraction were filtered and separated using Sepharose CL-2B column, the high molecular UAP and CP were degraded to the low molecular ones from at harvest to softening fruit. Thus, the amount of high molecular polymers were greatly decreased along with fruit softening.

• Applied Biological Chemistry
• /
• v.12
• /
• pp.99-105
• /
• 1969

The yield of cellulase derived from Trichoderma $(O_2-1)$ was remarkably varied with various concentration of ethanol and acetone in purification of the enzyme. In the purification with ethanol of ${\beta}-glucosidase$, the best result was obtained in the concentration of 60% and, of CMCase and of filter paper disintegrating enzyme 80%. And in the purification with acetone of ${\beta}-glucosidase$, filter paper disintegrating enzyme, and CMCase, in the concentration of 60%, 80%, and 90% respectively, was shown the best yield. The activities of crude Cellulase preparation could be seperated into few of fractions by column chromatography with Silica gel, Cellulose powder, and gauze. Most of CMCase, avicelase, and ${\beta}-glucosidase$ were eluted, but most of filter paper disintegrating enzyme and the rest of enzymes mentioned the above were absorbed, and were eluted with water. Therefore, it was considered that CMCase is different from filter paper disintegrating enzyme in properties. The relative activity of CMCase was different from that of avicelase in the peak of elusion part. And it was considered that filter paper disintegrating enzyme and cellulose powder saccharifying enzyme was seperated respectively as absorption part and non absorption part. The auther came to the conclusion that at least there were more than three sorts of cellulase in Trichoderma $(O_2-1)$ cellulase preparation.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.18-22
• /
• 2012

Photocurable binder for a transparent glass fiber composite was prepared with alicyclic methacrylate and fluorene-based diacrylate. ANOVA (analysis of variance) analysis was used to know main factors affecting the conversion of photocurable binder. It showed radiation intensity and photoinitiator (PI) concentration were main factors. The conversion of photocurable binder was simply increased with radiation intensity. Its increment however was abated with increasing PI concentration. We found that average conversion of the binder measured by FTIR-ATR was 87% when it was exposed to $5J/cm^2$ of UV dose with 5 wt% of PI. Oxime ester type PI was very effective to get a high degree of conversion, but it caused a yellowing problem. Owing to post-baking process, UV cured film showed an improved thermal stability by increase of conversion and removal of volatile organic compounds. TG% at $260^{\circ}C$ of film cured with 5 wt% of PI (TPO+MBF) and $5J/cm^2$ of UV radiation increased from 95.4 to 99.0% by post-baking at $230^{\circ}C$ for 5 min.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.270-278
• /
• 2017

The absorption of blood onto the surfaces of white cotton, polyester, rayon, and nylon fabrics was studied. Different categories of fabrics (woven and knitted) with diverse thickness, were manually folded twice to obtain four fabric layers, and $100{\mu}L$ of human blood was dropped onto the surface of the fabrics. The amount of blood that penetrated the fabric layer and the shape of bloodstain observed on the fabrics were influenced by the chemistry, thickness, and texture of the fabric. The blood bearing fabrics were left to dry for 3 days, washed by hand using tap water, and Lumiscene was then sprayed onto the fabrics to enhance the latent bloodstain for comparison of the shape of the bloodstain before and after washing by hand. The features of the bloodstain after washing varied greatly with the recipient fabrics. Additionally, stronger luminescence was observed at the surface where the blood was deposited compared to the background. However, it was confirmed that physical contact during the washing can deform the original shape of the bloodstain. The effect of the drying time on the bloodstain after hand washing was also studied. $100{\mu}L$ of blood was dropped on the surfaces of the fabrics and dried for 0, 1, 12, 24, 72 h, and 7 days, then washed by hand, before the bloodstain was enhanced with Lumiscene. The results of this experiment indicated that the increased drying time induces stronger chemiluminescence of Lumiscene. However, after drying of the bloodstain for 7 days, the luminescence of the bloodstain was decreased at the blood deposited site and increased around the blood deposited site.

• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.191-198
• /
• 1999

Enzyme-aided bleaching of softwood and hardwood kraft pulps by a xylanase preparation from an alkalophilic fungus Cephalospotium sp. RYM-202 was studied. Maximal solubilization of Pulp xylan was obtained at 5$0^{\circ}C$ in both kraft pulps. The optimum pH of the enzyme for the hydrolysis of pulp xylan was 8.0 and more than 90% of the maximal activity was detected at 9.0. The positive effects of xylanase pretreatment on bleachability of softwood and hardwood kraft pulps were observed. The kappa number of softwood and hardwood kraft pulps was decreased by 3.7 and 2.0 units, respectively. The pulp fibre integrity was not significantly affected by xylanase pretreatment when the physical properties of handsheets made from xylanase-treated pulps were compared with those of handsheets from untreated pulps. These results indicate that the alkaline xylanase of Cephalospotium sp. RYM-202 is well suitable for application in enzymatic prebleaching of softwood and hardwood kraft pulps under the alkaline conditions.

• Journal of Life Science
• /
• v.22 no.11
• /
• pp.1571-1586
• /
• 2012

On earth, there are about 5,400 kinds of mammals, of which about 1,000 kinds are herbivores. Among herbivores, about 250 kinds are known to be ruminants. As for cattle and sheep, which are ruminants, fermentation takes places mainly in their rumen; in contrast, for pigs and men, which are non-ruminants, fermentation takes place mainly in their caecum, colon, and rectum. As for the kind and dominance of rumen microorganisms, Bacteroidetes account for 51% and Firmicutes for 43%. As for the dominance of the large intestine microorganisms in men, Firmicutes account for 65% and Bacteroidetes for 25%. Cell wall components are decomposed by microorganisms, and short chain fatty acids (SCFAs) are generated through fermentation; the ratio of acetate, propionate, and butyrate generate is 60:25:15. Butyrate absorbed through the primary butyrate transporter MCT1 (mono carboxylate transports-1) in the intestines activates such SCFA receptors as GPR43 and GPR41. Butyrate has a strong anti-tumorigenic function. Butyrate is characterized by the fact that it has an effect on many cancer cells, contributes to the coordination of functions in the cells, and induces cancer apoptosis. Butyrate activates caspase but inhibits the activity of HDAC (histone deacetylase), so as to induce apoptosis. In addition, it increases p53 expression, so as to induce cell cycle arrest and apoptosis. Anti-inflammation actions of SCFA include the reduction of IL-8 expression in intestinal epithelial cells, the inhibition of NO synthesis, and the restraint of the activity of NF-${\kappa}B$ (nuclear factor ${\kappa}B$), so as to suppress the occurrence of cancers caused by inflammation. Butyrate plays an important role in maintaining physiological functions of intestinal mucous membranes and is used as a cure for inflammatory bowel disease (IBD).

• Korean journal of food and cookery science
• /
• v.7 no.3
• /
• pp.69-76
• /
• 1991

Recent epidemiological observations suggested beneficial effects of dietary fiber on man's health. The obsective of this study was to obtain the dietary fiber reference data of mushrooms. The dietary fiber contents of six different mushrooms (Cornellus edodes, Auricularia auriculajudae, Gyrophora esculanta, Agaricus bisporus, Pleurotus ostreatus, Collybia velutipes) were analyzed by Southgate method, modified neutral detergent fiber (NDF) method and Food Research Institute (FRI) method. Duplicate sample were used for each determination. The mean values of total dietary fiber by Southgate method, modified NDF method and FRI method were respectively $20.08\pm1.45g$/100g dry weight, $20.24\pm1.85g$/100g dry weight and $21.5\pm2.70g$/100g dry weight. The mean values of all mushroom samples by FRI method were significantly different from the mean values of the samples by modified NDF method and Southgate method. However, there was no difference in the mean values of the samples between modified NDF method and Southgate method. By Southgate method, total dietary fiber of mushrooms composed of 1.7-3.1% soluble fiber, 47.0-66.6% hemicellulose, 28.4-57.7% cellulose and 0.9-3.3% lignin. By modified NDF method, total dietary fiber of mushrooms composed of 61.8-79.1% hemicellulose, 5.4-32.9% cellulose and 4.5- l5.5% lignin. Therefore, dietary fiber contents of mushrooms were mainly hemicellulose. Our values for total dietary fiber for six mushrooms were 2~4 times higher than crude fiber in textbook.