• The Korean Journal of Rheology
• /
• v.6 no.1
• /
• pp.41-48
• /
• 1994

비뉴톤 유체내에서 이동하는 섬유들과 대분자들은 경우에 따라 일정한 길이와 직경 을 갖는 원통형 물체로 간주될 수 있으므로 유체내에서 이들의 운동을 효과적으로 제어하기 위해서는 비뉴톤 유체내에서 이동하는 원통형 물체들의 길이비와 직경비에 의한 항력계수의 영향을 조사할 필요가 있다. 이러한 사실에 근거하여 원통형 물체의 길이비와 직경비 변화 가 물체의 항력계수비와 직경비를 기준으로한 항력계수비들은 작업유체로 사용된 일반화된 뉴톤 유체와 점탄성유체내에서 이동하는 원통형 물체들의 길이비와 직경비가 증가함에 따라 감소했다. 원통형 물체의 직경비가 0.007에서 0.029까지 변하고 길이비가 10에서 130까지 변 하는 경우 점탄성용액내에서의 항력계수비의 감소율은 일반화된 뉴톤 유체내에서의 항력감 소비의 감소율 보다 10배 내지 30배까지 더컸다. 또한 모든 작업유체에서 원통형 물체들의 항력계수비들은 Reynolds수가 증가함에 따라 감소됐다.

• Composites Research
• /
• v.35 no.5
• /
• pp.334-339
• /
• 2022

This study suggests the prediction algorithm for transverse permeability, represented the flow resistance during the manufacturing process of composite, of unidirectional continuous fiber reinforced plastics. The cross-sectional shape of representative volume element (RVE) is considered to reflect fiber arrangement. The equivalent length is used as a factor to express the change of resin flow according to fiber arrangement. The permeability prediction algorithm is created by grafting the Electro-Hydraulic analogy and validity is confirmed. The code for permeability prediction was composed by means of MATLAB and Python, flow analysis was performed by using FLUENT. The algorithm was verified as the permeability results obtained through Algorithm and numerical analysis were almost identical to each other, and the calculation time was reduced around 1/450 compared to the numerical analysis.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.99-107
• /
• 2011

Light microscope, and scanning and transmission electron microscopy were used to investigate the fine structure of sperm of the Korea squirrel, Tamias sibiricus. The sperm head of T. sibiricus was paddle in shape. The total length of T. sibiricus sperm was 67.8 ${\mu}m$. The length of sperm head was 7.8 ${\mu}m$, and the tail (60.0 ${\mu}m$) was consisted of four major segments: the neck (1.0 ${\mu}m$), middle (8.0 ${\mu}m$), principal (48.5 ${\mu}m$) and end piece (2.5 ${\mu}m$), respectively. Especially, the length of the middle piece is short, and end piece was very shorter than those of other rodents. The post-nuclear cap was occupied about a fifth of nucleus. The equatorial segment is located between the post-nuclear cap segment and acrosomal cap on the nuclear surface. Nine segmented columns were surrounded by the mitochondria, and numbers of gyres of mitochondria were 26. One segmented column was consisted ten to twelve knobs, and each of segmented column in the neck region connected with the nine outer dense fiber in the middle piece. Numerous satellite-like fibers were scattered around the segmented columns. Nos. 1, 5 and 6 of the outer dense fibers in the middle piece were larger than the others. A fibrous sheath and longitudinal column of the principal piece were in evidence, but the fibrous sheath and longitudinal column was not seen at the end piece. In conclusion, the structural features of sperm head and tail may be useful information to patterns of sperm evolution and classification of species.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.461-464
• /
• 2008

This study investigated mechanical properties of the concrete using standard contents which was existent fibers in korea to apply the method for reducing crack of the non-reinforced concrete for the public space of an apartment with a fiber reinforcement. Results were summarized as following. The slump was slightly declined corresponding to the increase of the surface area and bridge effect of the fibers. For properties of the hardened concrete, the compressive strength was slighty reduced caused by the decrease of bonding strength between fiber and cement paste. The tensile strength was little increased according to bridge effect of the fibers, and the flexible strength and length change due to the drying shrinkage did not showed remarkable tendency.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.51-58
• /
• 2008

This study is to investigate the ultimate shear load of prestressed girder made of Ultra High Performance Fiber Reinforced Concrete (UHPFRC). Nine girders were tested until failure in shear. An analytical model to predict the ultimate shear load was formulated based on the Two Bounds Theory. A fiber reinforcing model was constituted based on the random assumption of steel fiber uniform distribution. The predicted values were compared with the conventional predictions and the test results. The proposed equations for computing the ultimate shear strength can be used for the ultimate failure status analysis, which could also be utilized for numerical limit analysis of prestressed UHPFRC girder. The established fiber reinforcing theoretical model can also be a reference for micro-mechanics analysis of UHPFRC.

• Korean Journal of Food Science and Technology
• /
• v.6 no.2
• /
• pp.79-85
• /
• 1974

To obtain further information concerning the nature myofibrillar proteins in a food system, an investigation has been conducted to compare the change in the biochemical property of the myofibril with the changes in the morphological structure of the myofibril. When myofibrils were prepared with 0.16 M KCl-0.04 M Tris-HCl, the band pattern was clear and distinct. There was a uniform thickening of A-band, a sharp appearence of Z-lines and a wide I-band. The band pattern of myofibrils was changed as the composition of extraction solution was changed. Also the ATPase activity of myofibril changed as the length of sarcomere changed. When myofibrils were treated with a low concentration of trypsin, myofibrils turned in the contracted state. With the progress of prolonged trypsin treatment, most of myofibrils exhibited a pattern of alternating light and dark bands, supercontracted pattern. Although myofibrils exhibited a supercontracted band pattern, the ATPase activity of myofibril continued to increase with the progress of trypsin treatment. An assumption was made that tropomyosin may be located in Z-line and that troponin-tropomyosin complex can inhibit the ATPase activity of myofibrils through the structural alternation of myofibril.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.551-559
• /
• 1996

To examine the effects of dietary fibers on gastrointestinal physiology, rats were fed with diets containing 10% sodium alginate,10% cellulose, or fiber-free diets for 5 weeks. The results obtained were as follows: The chronic consumption of sodium alginate induced a significant decrease in body weight gain and feeding efficiency, but a significant increase in length and weight of small intestine. Fecal bulk and weight were higher in fiber-fed group than fiber-free group. The chronic consumption of dietary fiber induced a significant increase in fecal output, resulting in tile decrease of apparent digestibility of protein and lipid. Pancreatic protease activity was lower in fiber-fed group than fiber-free group, whereas pancreatic amylase and lipase activities were not affected. Scanning electron microscopy(SEM) and light microscopy(LM) studies showed small intestine microvilli with numerous ridges and convolutions and goblet cells in fiber-fed groups. As a result of this study, it is concluded that the chronic consumption of dietary fiber decreases apparent digestibility of nutrients and induces morphological and biochemical adaptation of digestive organs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.219-220
• /
• 2011

The research is for building safety by using fiber reinforced concrete against impact load. The aim of this study is to evaluation of Impact Resistance of mortar by Reinforcement Condition of Aramid Fiber(fiber length, fiber surface treatment, fiber contents, hyrid reinforcement with steel fiber). Thus, the results indicate that it can improve mix condition and impact resistance by fiber surface treatment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.407-408
• /
• 2010

This study investigated fire resistance performance for ultra-high-strength concrete columns reinforced with various fibers such as polypropylene, nylon, and steel fibers. 24 small size column specimens were tested with standard heating curve of KS F 2257-1 for 3 hours. The main parameters were the aggregate types, the length of polypropylene fibers, and the content ratios of each fiber.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.55-60
• /
• 2003

Case that long-fiber reinforced polymeric composites of fiber orientation situation of a direction state is J=1 that is direction of tensile strength of another state appeared highest. And theoretical tensile strength value of long-fiber reinforced polymeric composites board of fiber orientation situation of a direction state appeared similarly with tensile strength value that long-fiber reinforced polymeric composites board of fiber orientation situation of a direction state. Also, than case that efficiency of fiber orientation situation of long-fiber reinforced polymeric composites is J=1 in it is J=0.1 of fiber orientation situation effect of long-fiber reinforced polymeric composites about 60% high appear.