• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.41-48
• /
• 2000

Recently, the requirement of automation in the every fields of the industrial places has been increased remarkably. The shooting range systems in the Past have been designed on the basis of static circumstance. However, Various transformation of the shooting circumstances is required, since the target for real shooting situation not static. In this study we have established for targets Per one shooting line to realize the dynamic shooting circumstance, distributed shooting order into sequence and random ones. and accommodated the shooting time variably. And, we have done an efficient communication possible, using CAN(Controller Area Network) applied to a lot of the car and the building automation. The CAN can support real-time control efficiently by connecting multiple ECU(Electric Control Unit), since it provide the high data transfer rate and the stability of communication.

• Journal of Radiation Protection and Research
• /
• v.11 no.2
• /
• pp.146-151
• /
• 1986

In this paper, general features and measured results of vacuum pressure on the vacuum system of 50 MeV proton KCCH-cyclotron which was installed in Korea Cancer Center Hospital are described. The vacuum system comprises five subgroups and the operating sequences are automatically controlled by EPROM-programmable controller. In normal operation, the obtained ultimate pressures of vacuum groups were $5{\times}10^{-6}mbar(I,\;II),\;2{\times}10^{-6}mbar(III),\;1.2{\times}10^{-5}mbar(IV),\;1.5{\times}10^{-6}mbar(V)$, respectively. It was confirmed that these pressures was enough to accelerate the 50 MeV-proton beam.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2000

On the 25th of November in 1997 winter season, unprecedented high waves were recorded at the southern part of Korea Peninsular. The significant wave heights over 4 m were recorded at Marado, Pusan and Ulrungdo successively with time lags. Seoguipo breakwaters which were under construction were damaged by the unexpected high waves. These unprecedented southerly high waves in winter seem to be caused by unusual development and traveling of low pressure. Weather charts and wave fields calculated by a numerical model were analyzed to examine the unusual development of these waves. Protection against the southerly high waves in winter must be considered in coastal constructions and structures.

• Smart Media Journal
• /
• v.7 no.1
• /
• pp.24-30
• /
• 2018

Acquisition of the FIDO authentication technology in pursuit of improved security function of the NFC-based 2 factor electronic payment system enabled GenoTech Ch., Ltd. to develop its new service, Gallery-Auction, demoed at Daegu Exhibition. The demonstration was followed by the improvement requests in banner creation & installation, changes in UI, changes in order of operation, etc, which were taken into account for the succeeding update. During the second demonstration held at 'Art: Gwangju: 17,' it analyzed and visualized the number of visitors per hour there.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.51-59
• /
• 2011

In domestic, the binary code analysis technology is insufficient. In general, an executable file that is installed on your computer without the source code into an executable binary files is given only the most dangerous, or because it is unknown if the action is to occur. In this paper, static program analysis at the binary level to perform the design and implementation framework. In this paper, we create a control flow graph. We use the graph of the function call and determine whether dangerous. Through Framework, analysis of binary files is easy.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.421-423
• /
• 2010

본 논문에서는 ART2 알고리즘을 이용하여 잠금 상태에서 스마트폰의 어플리케이션을 쉽고 빠르게 구동하기 위한 방법을 제안한다. 자신이 원하는 그림과 설치되어 있는 어플리케이션과의 대응 테이블을 만들기 위하여 학습 어플리케이션을 실행한다. 학습 어플리케이션의 동작 순서는 어플리케이션 실행 후 화면 하단에서 빠른 실행을 하고자 하는 어플리케이션을 선택하고 좌측상단에 위치하고 있는 입력 부분에 그림을 그린 후, 학습 버튼을 클릭한다. 그려진 그림의 배경은 0으로 그림은 1로 변환하고 ART2의 입력으로 사용할 수 있도록 일정한 크기로 정규화한다. 정규화 된 데이터를 팽창 연산을 통하여 학습에 용이하도록 최외각 픽셀을 확장하여 ART2의 입력 데이터로 적용한다. 학습이 끝난 후, 잠금 상태에서 액정 윗부분에 학습된 것과 같은 모양의 그림을 그리면 해당 어플리케이션이 실행된다. 제안된 방법은 기존의 방식인 잠금 해제 후, 어플리케이션을 탐색하고, 해당 어플리케이션을 실행하는 3 단계로 된 방식을 1 단계로 줄이기 때문에 원하는 어플리케이션을 실행하는데 시간이 적게 소요되는 장점이 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2011

Interactive media are applied to inner and outer space of small public space to enhance for the interaction between the spectator and works, also widely used in the exterior wall by LED and projector for advertisement. In the other hand, case studies of interactive media for large space have not less accomplished than those of buildings and public spaces. Thus, these studies analyzed 11 large structure examples by display, content, interface, and technology device by comparison of those cases of ordinary building public space. First interactive media for large space are found to be contents(39%), and next one is play(27%), advertisement(17%) and message(17%).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.389-391
• /
• 2013

실내공간에서 사용자 재실인원수를 파악하기 위한 일반적인 방법으로는 출입구의 내 외부 벽면에 인체감지용 센서를 두 개 이상 설치하여 센서 ID별로 감지되는 순서에 따라 사용자의 입 퇴실 상황을 판별하는 것이다. 기존에 사용되고 있는 대부분의 인체 감지용 센서시스템은 동일한 종류의 센서를 조합한 형태로서 각 센서의 종류에 따른 동작방식 및 하드웨어적 특징에 따라 빛이나 온도 등의 주변 환경 요소와 장애물 등에 의해 오작동하는 문제점을 가지고 있다. 이에 본 논문에서는 적외선, 초음파, 마이크로웨이브 등 세 가지 인체감지용 센서를 다양하게 조합할 수 있는 하이브리드 센서 모듈을 이용하여 사용자의 입 퇴실 상황과 공간 내 재실인원수를 정확하게 인식하기 위한 최적의 센서 조합을 파악한다. 실험 결과, 내부/외부 모두 적외선 센서 또는 마이크로웨이브 센서를 조합하거나 내부/외부에 적외선 및 마이크로웨이브 센서를 조합한 시스템이 타 센서를 조합한 시스템에 비해 우수한 성능을 보였다.

• Journal of the Korean Institute of Gas
• /
• v.10 no.3 s.32
• /
• pp.54-59
• /
• 2006

A safety device with shut-off function was developed for preventing intentional accidents that might happen by separating of cutting hoses connected to pressure regulators used in residential LP gas facility. For the verification of function and field adaptability, the safety device with shut-off function was tested in the state of joining the device to the regulator and a field test was carried out at home. This study shows that, at the inlet pressure of 0.07-1.56 MPa, the device shuts off the gas within the 5m length of hose regardless of the installation condition of the regulator. The shut-off flow rate increases in the order of perpendicular upward, horizontal and perpendicular downward. From the results of the field tests carried out at home for 5 months, there appears no problem using a gas range or a boiler. If the developed shut-off device is commercialized and distributed in the market the intentional accidents occurred by cutting or separating hoses can be prevented remarkably.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.103-114
• /
• 2011

In this study, we discuss a fatal accident severity model obtained from the analysis of 112 crash sites collected since 2000, and the resulting relationship between fatal accidents and roadway geometry design. From the 720 times computer simulations for improving driving safety, we then reached the following conclusions:. First, the result of cross and frequency-analyses on the car accident sites showed that 43.7% of the accidents occurred on the curved roads, 60.7% on the vertical curve section, 57.2% on the roadways with radius of curvature of 0 to 24m, 83.9% on the roads with superelevation of 0.1 to 2.0% and 49.1% on the one-way 2-lane roads; vehicle types involved are passenger vehicles (33.0%), trucks (20.5%) and buses (14.3%) in order of frequency. The results also show that the superelevation is the most influencing factor for the fatal accidents. Second, employing the Ordered Probit Model (OPM), we developed a severity model for fatal accidents being a function of on various road conditions so as to the damages can be predicted. The proposed model possibly assists the practitioners to predict dangerous roadway segments, and to take appropriate measures in advance. Third, computer simulation runs show that providing adequate superelevation on the segment where a fatal accident occurred could reduce similar fatal accidents by at least 85%. This result indicates that the regulations specified in the Rule for Road Structure and Facility Standard (description and guidelines) should be enhanced to include more specific requirement for providing the superelevation.