• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.63-74
• /
• 2006

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the full-scaled field test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM. From the full-scaled test in field, the use of in-situ CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the ground surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was the smaller than the other cases, and the absolute value was almost zero. Judging from the full-scaled field test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing the failure of the underground pipes.

• Journal of Science Education
• /
• v.38 no.3
• /
• pp.718-736
• /
• 2014

This study was intended to determine PCK of the middle school science teachers on Mendelian genetics and factors influenced to form their PCKs. Two science teachers with biology major with a teaching experience over 5 years were chosen as the subject. Data were collected by class observation, semi-structured interview, teacher questionnaire survey, Content Representation and Pedagogical and Professional-experience Repertoire. The collected data were analyzed based on Magnusson's PCK for science teaching consisting of five components: (a) the orientation toward teaching science, (b) the knowledge of science curriculum, (c) the knowledge of students' understanding, (d) the knowledge of assessment, and (e) the knowledge and belief in the instructional strategies to teach science. Teachers could have the orientation toward teaching science served as an assisting role to support students' abilities. Both subject teachers seemed to focus on giving lectures. Their efforts to improve students' exploration methods and abilities were not expressed enough in their real classes and they found that students struggled to understand Mendelian genetics. Therefore, they should have explained them in an easier way and worked harder to make their students understood accurately and applied basic and advanced concepts of Mendelian genetics. They found students' preconception and misconception regarding Mendelian genetics and wished to enhance their learning effects by various teaching strategies such as correcting misconception, adding the history of science and simply assessing students' affirmative domains. It was also found that factors influenced to form PCK regarding Mendelian genetics by both teachers were as follows: teacher's personality and endeavor, textbooks and guidance books, schools and their circumstances, teaching experience, experience as a learner, interaction with their colleagues, and university curriculum. Both teachers said that it was important for teachers to make every efforts to give better classes.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.290-296
• /
• 2015

This study was conducted to investigate the influence of the mixed application of chemical fertilizer (CF) with liquid swine manure (LSM) on the agronomic characteristics, dry matter yield, minerals, and free sugar in cultivating Sorghum ${\times}$ Sorghum Hybrid (SSH) on paddy soil. The field experiment was designed in a randomized block design with three replications and consisted of CF 100% (C), CF 70% + LSM 30% (T1), CF 50% + LSM 50% (T2), CF 30% + LSM 70% (T3), and LSM 100% treatment (T4). The application of LSM was based only on the nitrogen (150 kg/ha). Plant length, leaf length, leaf width and stem diameter were significantly the lower in T4 (p<0.05). Stem hardness increased significantly (p<0.05) as the LSM application rate decreased. Fresh yield was the highest in T2, whereas the lowest in T3 (p<0.05). However, dry matter yields and TDN yield did not show significant difference among treatments. Crude protein was the highest in T1 (p<0.05). Crude fat content did not significant differences between the T1, T2, T3 and T4, but C showed a significantly different (p<0.05). NDF and crude fiber were the highest in T3 and C, respectively (p<0.05). However, ADF did not show significant difference among treatments. Total mineral contents were higher in the order of T1> T2> T4> T3> C (p<0.05). Free sugar contents were significantly higher at T1 and C as compared to other treatments. The analysis of all the above results suggests that the application of liquid swine manure is very effective, considering the yield performance and the content of mineral and free sugar. In addition, liquid swine manure may be possible to grow SSH without chemical fertilizer.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.175-182
• /
• 2018

Knowledge of the optimum cultivation period for Chinese cabbage would help growers especially in spring in Korea. Growth and yield of Chinese cabbage in a temperature gradient chamber was evaluated for the growing periods of 64 days from three set of transplanting dates including March 6, March 20, and April 3 in 2017. Air temperature in the chamber was elevated step-by-step, by $2^{\circ}C$ above the ambient temperature. This increment was divided into three phases; i.e. low (ambient+$2^{\circ}C$, A), medium (ambient+$4^{\circ}C$, B), and high temperature (ambient+$6^{\circ}C$, C). The fresh weight of Chinese cabbage was greater under B and C conditions in the first period and A in the second period, which indicated that GDDs affected the fresh weight considerably. However, leaf growth (number, area, length, and width) did not differ by GDDs. Bolting appeared under A condition in the first period, which was caused by low temperature in the early growth stage. Soft rot was developed under C condition in the second period and all temperature conditions in the third period, which resulted from high temperature in the late stage. Fresh weight increased when GDDs ranged from 587 to 729. However, it decreased when GDDs > 729. The maximum expected yield (16.3 MT/10a) was attained for the growing period of 64 days from transplanting date during which GDDs reached 601. The GDDs for optimum cultivation ranged from 478-724 under which the yield was about 95% (15.5 MT/10a) of maximum fresh weight. Such an optimum condition for GDDs was validated at five main cultivation regions including Jindo, Haenam, Naju, Seosan, and Pyeongtaek in Korea. In these regions, GDDs ranged from 619-719. This suggested that the optimum GDDs for Chinese cabbage cultivation would range from 478-724, which would give the useful information to expect the cultivation periods for ensuring maximum yield.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.3
• /
• pp.238-246
• /
• 1994

This experiment was carried out to determine the effects of seeding date and fall harvest method on the growth characteristics, forage yield and quality of winter rye(Seca1e cereale L.) at the forage experimental field, College of Agriculture and Life Sciences, SNU, Suweon from 5 September 1992 to 21 May 1993. The experiment was arranged in a split plot design with three replications. Main plots consisted of three harvests, no defoliation, cutting and grazing. Sub-plots consisted of seeding dates, early(5 September), mid(25 September) and late(l0 October). The results obtained are summari7d as follows; I . A 3-day difference in the first heading of rye was observed between no defoliation and fall grazing, while there was a 6day difference between early and late seeding dates. Therefore, the effect of seeding dates on the fist heading date of rye was larger than that of fall harvest methods. 2. CP content of rye with fall grazing was slightly higher averaged 16.5% compared with both fall cutting and no defoliated 1ye(15.6%). Mean CP content of rye at the early, mid and late seeding dates was 14.2, 14.5 and 19.1 %, respectively. 3. ADF content of rye was slightly higher with both fall cutting(29.99) and no defoliation(29.5%) than that of fall grazing(28.0%). ADF content of rye at the early, mid and late seeding dates was 30.7, 29.1 and 27.7%, respectively. Effect of fall harvest methods and seeding dates on NDF content of rye were similar to the observations made on ADF. 4. RFV and IVDMD of rye were lower with both no defoliation and fall cutting than fall grazing. but those of rye slightly increased with seeding dates progressed. 5. Dry matter yield of rye was the highest of 6,779 kg/ha with fall cutting, while the lowest yield of 6,240 kg/ha was obtained from no defoliation But no significant difference was found among the harvest methods. Dry matter yield of rye was significantly declined with later seedings. It is concluded that the highest forage yield of rye be possible from two harvest systems of fall and spring with earlier seeding rather than from one harvest system of spring.

• International Journal of Highway Engineering
• /
• v.11 no.3
• /
• pp.97-109
• /
• 2009

One of the main causes of asphalt rutting is high temperature of the pavement. Nevertheless, there has been few research on lowering the pavement temperature for reducing rutting. This study investigated the performance characteristics of moisture-retaining porous asphalt pavement, which is known to have a temperature reducing effect. The purpose of this study is to quantify the temperature reducing effect of moisture-retaining porous asphalt pavement and its effect of reducing rutting through Accelerated Pavement Testing(APT). Additionally, the possibility of reducing the thickness of the pavement in comparison to general dense grade pavement by analyzing structural layer coefficient of moisture retaining pavement. A total of three test sections consisting of two moisture-retaining porous asphalt pavement sections and one general dense-grade porous asphalt pavement section were constructed for this study. Heating and spraying of water were carried out in a regular cycle. The loading condition was 8.2 ton of wheel load, the tire pressure of $7.03kgf/cm^2$, and the contact area of $610cm^2$. The result of this experiment revealed that the temperature reducing effect of the pavement was about $6.6{\sim}7.9^{\circ}C$(average of $7.4^{\circ}C$) for the middle layer and $7.9{\sim}9.8^{\circ}C$(average of $8.8^{\circ}C$) for surface course, resulting in a rutting reduction of 26% at the pavement surface. Additionally, the structural layer coefficient of moisture retaining pavement measured from a laboratory test was 0.173, about 1.2 times that of general dense grade pavement. The general dense-grade porous asphalt pavement test section exhibited rutting at all layers of surface course, middle layer, and base layer, while the test sections of moisture-retaining porous asphalt pavement manifested rutting mostly at surface course only.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.4
• /
• pp.317-323
• /
• 2004

This study was carried out to determine the effect of seed method and seeding rate on the desirable agronomic characteristics and yield of forage barley(Hordeum vuigare) at paddy field, National Livestock Research Institute, RDA, Suwon from October 2001 to May 2003. The experiment was arranged in a spilt plot design with three replications. Main plots consisted of tow seed method; Broadcasting and drilling, Sub-plots consisted of seeding rates; 130. 160, 190 and 220 kg/ha. The results obtained were summarized as fellows ; The resistance of cold, disease and lodging of barley for the seeding method and seed rate were not different. And dry matter percentage of barley for a seeding method of 130 kg/ha at the broadcasting was the lowest of $32.0\%$, and that for the drilling at 130 kg/ha was $32.7\%(P<0.05). Fresh yield of barley for a seeding method of drilling at 130 kg/ha was the highest of 32,073 kg/ha, and that for a seeding method of broadcasting at 130 kg/ha was the lowest of 20,944 kg/ha(P<0.05). Dry matter yield of barley for a seeding method of drilling at 160 and 130 kg/ha were the highest 9,170 and 9,138 kg/ha, and that fur a seeding method of broadcasting at 130 kg/ha was the lowest of 5,710 kg/ha(P<0.05). Based on the results of this experiment, it appears that the seeding method and rate of barley could be enhanced by drilling from 130 to 160 kg/ha, and broadcasting from 190 to 220 kg/ha. respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.254-263
• /
• 2017

This study was carried out to introduce of agronomic characteristics, forage yields and quality of Sorghum ${\times}$ Sudangrass hybrids 'Cadan 99B' and 'Sweet Sioux WMR' from 2015 to 2016 in middle and southern regions of Korea. The field experiment design was complete in seven varieties with three repetitions. Sorghum ${\times}$ Sudangrass hybrids were sown on mid-May in middle region, and end-May in southern region of Korea, in 2015 and 2016. The observed average heading date of Cadan 99B and Sweet Sioux WMR were July 22. The heading dates of Cadan 99B and Sweet Sioux WMR were 8 days earlier than SX-17 and 5 days earlier than brown mid-rid (BMR) Revolution. The sugar contents of Cadan 99B and Sweet Sioux WMR were 6.5 and $6.9Brix^{\circ}$, respectively. Comparison with BMR variety, the sugar contents of Candan 99B and Sweet Sioux WMR were 0.2 and $0.6Brix^{\circ}$ higher than Revolution, respectively. The average of dry matter (DM) yield for 2 years and 2 regions of Cadan 99B (24,587kg/ha) were the highest among the seven varieties, but there was no significant difference among other varieties except headless control variety Jumbo (19,119kg/ha) and LATTE (20,778kg/ha) (p>0.05). The crude protein (CP) and in vitro dry matter digestibility (IVDMD) of Cadan 99B were 7.5% and 60.2%, and Sweet Sioux WMR were 6.9% and 60.7%, respectively. The results of this study indicated that Sorghum ${\times}$ Sudangrass hybrids Cadan 99B and Sweet Sioux WMR are earlier heading dates and higher than SX-17, and high yields of DM in middle and southern regions of Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.277-282
• /
• 2017

This study was conducted to evaluate on agronomic characteristics, forage quality and dry matter (DM) yields of mugwort (Artemisia princeps Pamp.) collected different region at Seongju in Kyeongbuk from 2014 to 2015. The experiment was arranged in randomized complete block design with three replications. Mugwort was planted on $17^{th}$ March, 2014 and harvested on $13^{th}$ September, 2014 and on $25^{th}$ May and $9^{th}$ September, 2015. DM yields of Dalsung(1), Seongju B.(1), Dalsung(2) and Sajuarissuk were 17.3, 16.8, 16.7 and $16.7(MT\;ha^{-1})$, respectively and the DM yields of those were higher (p<0.05) than the other mugworts in 2014. In 2015, DM yields of Dalsung(1), Dalsung(2), Seongju B.(1), and Sajuarissuk were 19.5, 19.3, 18.4 and $18.4(MT\;ha^{-1})$, respectively and DM yields of those were higher (p<0.05) than the others. DDM(digestable dry matter) content of mugworts was a range of 56.4 to 60.8% and that of Sajabalssuk, 60.8% was the highest. Seongju B.(1) 58.8% was higher than Seongju B.(2) 56.4% but there were no difference among the Dalsung(1) 58.4%, Dalsung(2) 58.1%, Sajuarissuk 57.7% and Yeongcheon. The result of this study indicated that Dalsung(1), Dalsung(2), Sajuarissuk and Seongju B.(1) would be recommendable for forage production.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.661-683
• /
• 2001

There is a rapid increase in the use of digital video information in recent years, it becomes more important to manage video databases efficiently. The development of high speed data network and digital techniques has emerged new multimedia applications such as internet broadcasting, Video On Demand(VOD) combined with video data processing and computer. Video database should be construct for searching fast, efficient video be extract the accurate feature information of video with more massive and more complex characteristics. Video database are essential differences between video databases and traditional databases. These differences lead to interesting new issues in searching of video, data modeling. So, cause us to consider new generation method of database, efficient retrieval method of video. In this paper, We propose the construction and generation method of the video database based on contents which is able to accumulate the meaningful structure of video and the prior production information. And by the proposed the construction and generation method of the video database implemented the video database which can produce the new contents for the internet broadcasting centralized on the video database. For this production, We proposed the video indexing method which integrates the annotation-based retrieval and the content-based retrieval in order to extract and retrieval the feature information of the video data using the relationship between the meaningful structure and the prior production information on the process of the video parsing and extracting the representative key frame. We can improve the performance of the video contents retrieval, because the integrated video indexing method is using the content-based metadata type represented in the low level of video and the annotation-based metadata type impressed in the high level which is difficult to extract the feature information of the video at he same time.