• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.61-62
• /
• 2010

This paper provides an analysis using statistical method on the basis of database (DB) of bridge inspection reports performed by KISTEC from 1995 to 2007. Measured impact factors of total 36 railway bridges were classified by the span length, type of bridges and natural frequency. The fundamental frequency and the impact factors of inspected bridge are compared with formulas specified in both domestic and foreign railway bridge design codes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.70-76
• /
• 2013

The objective of the paper is to present the results of analytical and experimental studies dealing with dynamic load for continuous steel girder bridges due to normal truck traffic. Various bridge design codes specify dynamic load factor (defined as a fraction of static portion of live load) for short span structures at the level of about 0.3. However, there are not definite values specified for continuous brigdes. Therefore, it is an usual practice to use the code specified dynamic load factors for simple span bridges to continuous bridges without clear background. The field measurement results indicate that the actual dynamic load factors are less than 0.2 for a single truck, and less than 0.05 for two trucks side-by-side, regardless of positive and negative moment region.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.223-229
• /
• 2017

Europe, the US and Japan have acquired test results on impact coefficient for a long time and applied it to equipment design to secure safety of structures. However, Korean enterprises use the impact factor held by advanced business to design equipment as it is difficult for them to obtain it through tests. In this paper, NX/NASTRAN, was used to perform static load analysis and impact load analysis of a PCB Handler, semiconductor test equipment, and the result was employed to study how to calculate the impact coefficient with the finite element analysis. The calculation method was applied to the JIS(Japanese Industrial Standard), and the impact coefficient of the PCB handler was calculated as 1.27 for the sudden start or stop. The impact coefficient generated by the analysis is expected to make a great contribution to the industry as it can be used to improve the equipment structure and develop on existing equipment in the future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.11 s.116
• /
• pp.1132-1139
• /
• 2006

Non-contact underwater explosions against surface ship could cause extensive equipment damage during wartime service. Thus, the need to develop methods for the design of shock resistant equipment structures and systems was strongly established. In analytical methods, DDAM(Dynamic Design and Analysis Method) and transient repsonse method are used for ship shock design. In this paper, to analyze the characteristics of DDAM, medium weight shock test, DDAM and transient response analysis for missile system equipment are performed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2019

In this paper the response factor is investigated for middle and small size-RC slab aged bridges. The response factor consists of static and dynamic response factors and is a main parameter in the frequency based-bridge load carrying capacity prediction model. Static and dynamic response factors are determined based on the frequency variation and the impact factor variation respectively between current and previous (or design) states of bridges. Here, the impact factor variation is figured out using the impact factor response spectrum which provides the impact factor according to the natural frequency of bridges. In this study, four actual RC slab bridges aged over 30 years after construction are considered and their span length is 12m. The dynamic loading test in field using a dump truck and eigenvalue analysis with FE models are conducted to identify the current and previous (or design) state-natural frequencies of the bridges, respectively. For more realistic considerations in the moving loading situation, the impact factor response spectrum is developed based on tri-axle moving loads representing the dump truck load distribution and various supporting conditions such as simply supported and both ends fixed conditions. From the results, the response factor is widely ranged from 0.21to 0.91, showing that the static response factor contributes significantly on the results while the dynamic response factor has a small effect on the result. Compared to the results obtained from the impact factor response spectrum based on the single axle-simply supported condition, the maximum percentage difference of the response factors is below 3.2% only.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.45-52
• /
• 2010

This paper estimated the impact factor using the finite element program to confirm the dynamic behavior of new type of bridges constructed by introduction of new vehicles and compared the design criteria about the impact factor applied to domestic as well as each country. The study estimated effects of the impact factor according to pipe truss types modeled as respectively 34m, 44m, 54m and span length. The vehicle models are vehicle for bimodal tram of two axis and three axis which passes on actual bridge and dump truck model proposed by Park Young suk(1997). Each vehicle is estimated the impact factor according to velocity from 10 to 100(km/h) and examined. Also, the study investigated and compared the design regulation of domestic and a foreign country based on the impact factor on span center calculated in accordance with vehicle and span length.

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.50-57
• /
• 2017

In this study, the experiment for determining shock loss at the branch is conducted for the design of network double-deck road tunnel ventilation. The shock loss coefficient that determines the quantity of shock loss has been considered only regarding the constant aspect ratio of circular or rectangular section. However the suggestion of shock loss coefficient is needed since the aspect ratio of double-deck road tunnel for small vehicle is considered around 1:3 with the low height in Korea. The experiment model was made with the scale of around 1:23 applying Reynolds similarity law, so that the shock loss coefficient on the branch of the large aspect ratio was measured. The result of the study showed that shock loss coefficients of both split branch and straight branch were measured two to three times higher than those calculated from the theoretical equation or design values of previous studies. Therefore the study resulted the effect of large aspect ratio on shock loss coefficient was huge, and it is expected that precise design value can be suggested for the design of network double-deck tunnel ventilation.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.132-145
• /
• 2017

Shock loss was not applied for the tunnel ventilation of road tunnel in the past. However, pressure losses due to the shock loss can be significant in network double-deck road tunnel in which combining and separating road structures exist. For the optimum ventilation design of network double-deck road tunnel, this study conducted 3D CFD numerical analysis for the shock loss at the combining and separating flows. The CFD model was made with the real-scale model that was the standard section of double-deck road tunnel. The shock loss coefficient of various combining and separating angles and road width was obtained and compared to the existing design values. As a result of the comparison, the shock loss coefficient of the $30^{\circ}$ separating flow model was higher and that of the two-lane combining flow model was lower. Since the combining and separating angles and road width can be important for the design of shock loss estimation, it is considered that this study can provide the accurate design factors for the calculation of ventilation system capacity. In addition, this study conducted 3D CFD analysis in order to calculate the shock loss coefficient of both combining and separating flows at flared intersection, and the result was compared with the design values of ASHRAE. The model that was not widened at the intersection showed three times higher at the most, and the other model that was widened at the intersection resulted two times higher shock loss coefficients.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.127-132
• /
• 1991

충격에 민감한 용기나 기계들은 운반이나 보관중에 받을 수 있는 진동충격 을 완화시키기 위해 충격 마운트를 이용하게 되며, 충격마운트는 용기나 기 계들이 허용하는 최대가속도와 이들이 취급되는 환경에 의해 적절히 선정되 어야 한다. 그러므로 내충격 설계는 최대 허용 가속도나 취급환경에 대한 사 양과 이 사양에 의한 충격 마운트의 선정, 그리고 선정된 내충격 시스템의 충격시험에 의한 오일 탬퍼의 결합용이 사용되기도 하지만 구조가 복잡하고 가격이 비싸서 대용량이 경우에만 국한되어 사용되고 있으며, 가장 경제적인 것은 방진고무를 사용한 것이다. 내충격 시스템은 일반적으로 큰 변형량을 요구하고 있으며, 방진고무의 경우 큰 변형에서는 hardening 스프링의 비선 형성을 가지고, 형상계수와 고무배합율에 따라 정적 스프링상수와 동적 스프 링상수가 큰 차이를 보이는 등, 설계상의 여러 제한이 있다. 그러나 방진고 무는 형상변화가 자유로우며 제작이 용이하기 때문에 이러한 장점을 이용하 면 저렴하고 다양한 용도의 충격마운트 제작에 효과적으로 사용될 수 있다. 본 논문에서는 원통형 콘테이너의 내충격 설계를 위해 충격사양에 의한 충 격마운트의 설계, 설계된 내충격 시스템의 충격시험에 의한 검증을 순차적으 로 실시하여, 방진고무를 이용한 충격마운트 설계기술을 제시함으로써, 이후 방진고무제품의 설계를 위한 자료 및 과정의 제정에 도움을 주고자 한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.3.2-6
• /
• 1998

본 논문에서는 실측된 실내 충격 응답을 모델링하여 실내 잔향 필터 설계를 시도하였다. 급강하법(steepest descent method)을 이용하여 측정된 실내 충격 응답을 4개의 콤 필터(comb filter)와 2개의 올패스 필터(allpass filter)로 이루어진 잔향 필터로 모델링하여, 잔향 필터의 계수를 결정하였다.