• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2082-2089
• /
• 1992

An experimental study on forging an axi-symmetric dome type of AISI4130 was carried out using modeling material. In order to verify the validity of the experimental data, a similarity study between plasticine and AISI4130 has been made. Friction conditions were characterized by ring test for the various lubricants. For the closed-die forging experiments of an axi-symmetric dome type of AISI4130 using the plasticine, various cylindrical billets with different aspect ratios were forged and different flash width to thickness(W/T) ratios were used in order to determine the optimum forging conditions. As W/T ratios decrease forging loads decrease while excess volumes increase. It was found out that the experimental results reproduce the similiar results available in the literature. As a result of these experiments, it was construed physical modeling is an excellent tool for forging process simulation at a practical level.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.458
• /
• pp.53-55
• /
• 2015

국토교통부는 '건축물의 에너지절약 설계기준'과 관련해 지난해 9월, 12월 두 차례 개정하고 시행에 들어갔다. 이 기준은 건축물의 효율적인 에너지관리를 위해 열손실 방지 등 에너지절약 설계에 관한 기준, 에너지절약계획서 및 설계 검토서 작성기준, 녹색건축물의 건축을 활성화하기 위한 건축기준 완화 등에 관한 사항을 담고 있다. 특히 9월 개정에서는 LED조명 설치 확대, 에너지성능지표(EPI) 전기부문 검토항목 추가 등 전기부문에 대한 내용이 다수 포함돼 있어 관계자들의 관심이 요구된다. 개정내용 중 전기부문에 대해 자세히 해설한다.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.6
• /
• pp.29-39
• /
• 2001

본 논문에서는 차세대 고속선에 적합한 선형의 하나로 거론되고 있는 삼동선의 개발 현황을 살펴보고, 실선으로의 가능성을 파악하기 위하여 적용 대상선을 2,500톤급 삼동형 함정으로 설정하여 개념설계를 수행한 결과를 보이고자 한다. 함정의 설계조건과 요구사항에 적합하도록 삼동선의 장점을 최대한 반영하여 초기 개념 설계를 수행하였으며, 이로부터 도출된 삼동선형의 유체역학적인 성능검토를 위해 저항추진, 내항 및 조종성능에 대한 연구를 수행하고 그 결과를 유사 단동선과 비교, 검토하였다. 연구결과의 가시화를 위하여 최종적으로 3차원 컴퓨터 그래픽 모델링하고, 실선의 1/100 축적모형을 제작하여 설계결과를 표현하였다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.117-126
• /
• 1990

In the early stage of ship design process large number of alternative compartment layout designs are generated and examined iteratively. Therefore, the design efficiency will be considerably enhanced if a tool is available to perform this kind of iterative design process effectively in a relatively short time. This paper describes a method for generating and evaluating various alternative compartment layout designs in a personal computer. In this method, computer model of a compartment layout is generated by establishing the hierarchical structure of the entities forming a compartment and defining clearly the relationships among the entities. The evaluation of the design alternatives are effectively performed utilizing the computer model generated. The data structure for storing the defined compartment layout is explained and an illustrative example is given showing the application of the method to the design and evaluation of compartment layout of an Oceanographic Research Vessel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.56-68
• /
• 2019

Safety-conscious design on site is required for site constructions because of the introduction of the design for safety, but it still leaves much to be desired. This study compared the site where the design was applied and the site where it was not applied. The applied case examined the underground wall construction during frame construction, which corresponds to the skeleton of the building construction. The underground wall construction is quite risky due to the exposure to exterior environments and involvement of various stages, such as scaffolding, formwork, reinforcing work, and concrete casting work. Therefore, the risk factors for each stage were identified and a risk assessment was carried out to select an alternative method to reduce the risk. The risk factors of the selected alternative construction method were also identified and a risk assessment was conducted. The risk assessment weight was calculated by comparing the site where the construction method was applied and the site where it was not, explaining the necessity of the design for safety in reducing the risk. In addition, an actual case where an alternative construction method was used was studied to highlight the necessity for a design for safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2A
• /
• pp.137-148
• /
• 2010

This study proposes the optimal ratio of vertical load-carrying capacity (${\beta}$) by investigating structural performances and economic efficiency in the extradosed bridges. Without design standards for the extradosed bridge, Japanese design standards have been used domestically. For the design live load, DL24 is found to be more adequate than DB24. Using the DL24 load, parameter studies are carried out. The parameters are 'main tower height', 'main girder stiffness', and 'cable arrangement'. As a result, it is found that one side cable-stayed extradosed bridges are more economical than double side cable-stayed extradosed bridges. This study also shows that when the ratio of vertical load-carrying capacity(${\beta}$) is 30~50% in the extradosed bridge with the ratio of tower height to main span length 1/6, the extradosed bridge is most economical because of the cable stress less than the allowable stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.96-104
• /
• 2018

Military vessels are complex weapon systems consisting of various integrated onboard equipment. Since their acquisition of military equipment takes a long period of time and a prototype ship is deployed and tested, vessel development has relied on its proprietary process. However, due to the growing complexity of onboard equipment technology, application of systems engineering (SE) process has become indispensable. Nonetheless, an effective design process complementing the existing design with the SE has not yet been developed. As such, we have studied an improved basic design process for submarines based on SE. To do so, we analyzed the processes for the basic design, technical review, and requirement management. Included reviews and requirements are SRR, SFR and PDR, and SSRS, SSS, and SSDD. By combining the results in the SE framework, we built an improved basic design process that can be applied in parallel with the SE-based technical review and requirement management. To assess the process, we applied our proposed model to the submarine development undergoing the basic design phase. It is possible to effectively manage the requirements, design artifacts and improve traceability, and also utilize them as test and evaluation materials. The SE-based basic design process is expected to be useful in other kinds of vessel design.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.3
• /
• pp.51-57
• /
• 2007

In the design of slopes during rainfall, the groundwater level is assumed to be located at the ground surface, based on the change in characteristics of rainfall. In addition, stability investigations are performed for large cut slopes in the design of slopes while standard inclinations specified in the design criteria are applied for the slopes that stability investigations are not performed. In spite of the strengthened criteria of groundwater location, slope failures continuously occur during heavy rainfall, regardless of magnitude of slopes. In order to investigate the cause of the failures, stability investigations have been performed on standard inclination of slopes suggested in the design criteria for both dry and rainfall cases by ground condition in this research. Despite that standard inclination of slopes specified in the design criteria should be stable for both dry and rainfall cases, the results show that standard factor of safety has not been obtained in many cases; more than 50% of total cases for dry cases and more than 65% of total cases for rainfall case. Based on the results, this paper indicates the problems in the current design criteria and proposes the plans for establishment of countermeasure.

• Land and Housing Review
• /
• v.7 no.4
• /
• pp.315-322
• /
• 2016

Recently, Ministry of Land, Infrastructure and Transport has amended the law to Design for Safety in working design stage of construction work. There should be informed the disaster likelihood and severity of unit-works to decide risk of unit-works in Design for Safety. Therefore, the construction disaster data of ${\bigcirc}{\bigcirc}$ corporation were classified as 24 unit-works and the disaster likelihood and severity of unit works were analyzed in this study. The safety management level of unit-works which based on analysis data was suggested 3 groups; special management and emphasis management, regular management. The results of this study can be used as basic information to perform Design for Safety in construction. And this information will be able to reduce the disaster.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.62.2-62.2
• /
• 2012

한국천문연구원의 대형광학망원경 개발사업(K-GMT)은 거대마젤란망원경(GMT; Giant Magellan Telescope)의 지분 10% 확보를 목표로 2009년부터 2018년까지 수행하고 있는 사업이다. 2011년 GMT 프로젝트에서는 1세대 후보관측장비 개념설계검토회의 수행, 첫번째 주경 최종 마무리, GMT 핵심연구주제 확정을 위한 활동을 수행하였다. 2012년에는 1세대 관측장비를 공식 선정 및 상세 설계 수행, GMT 자료처리센터 구축에 관한 개념설계, 연말로 예정된 GMT PDR 준비를 시작할 예정이다. 국내 사업에서는 GMT 핵심연구그룹 육성을 위하여 AAT 3.9m, CFHT 3.6m, Magellan 6.5m 망원경 활용 연구를 수행하였고 2012년에는 UKIRT 4m 등을 이용한 연구, 계절학교 개최등의 활동이 예정되어 있다. 부경개발분야에서는 시험모델에 대한 2011년 설계검토 및 제작준비완료검토에 이어 최종 시험을 실시할 예정이며 관측기기개발 분야에서는 GMT 1세대 관측장비 선정이 완료되면 본격적으로 기기개발에 참여할 예정이다.