• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.150-158
• /
• 2016

This study was conducted to evaluate growth characteristics, yield and feed value of newly developed domestic teosinte (Geukdong 6) compared to widely cultivated silage corn hybrid (31N27) and sorghum ${\times}$ sudangrass hybrid (P877F). Geukdong 6, a new single cross (Teosinte ${\times}$ Suwon 19) variety, is a teosinte (Zea may L. ssp. maxicana) developed by the Geukdong 6 of agricultural company corporation (GACC) in An-dong province. This field experiment was designed in a randomized block design with three replications and consisted of silage corn (T1), sorghum x sudangrass hybrid (T2) and Geukdong 6 (T3). Leaf length, number of leaves, number of tillers and fresh yield of T3 were higher than that of T1 and T2 (p<0.05). Dry matter yield of T3 was lower than that of T1 (p<0.05). In particular, T3 ($0.1kg/cm^2$) showed to be very tender compared to other T1 ($0.5kg/cm^2$) and T2 ($0.5kg/cm^2$), (p<0.05). The crude protein content of T3 as 8.25% was higher than that of T2 (5.90%), (p<0.05). However, there was no significant differences between T1 (8.14%). The brix degree of T2 was higher than that of T1 and T3 (p<0.05). T3 showed higher content of total minerals compared to T1 and T2 (p<0.05). The relative palatability of T3 was higher than T1 and T2 (p<0.05), when fed to deer as soiling crop. However, it showed a lower than T1 in Korean native cattle and korean native goats. The relative palatability of the silage shown in order of T1> T3> T2 in korean native cattle, spotted deer, and korean native goats. As mentioned above the results, Geukdong 6 (T3) could be recommended as using of soiling and lab silage, when high fresh yield, tender stem, number of many leaf, content of high crude protein, and palatability higher than sorghum ${\times}$ sudangrass hybrid were considered.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.454-460
• /
• 2019

The purpose of this study is to analyze the distribution characteristics of mist spray particle size by devising a rotary mist spraying device to develop the evaporative salt water desalination system. The rotary mist spraying device was consisted of a BLDC sirocco fan, a spinning fan, a fan fixed shaft and a salt water supply device etc. In this study we analyzed the characteristics of spray particle size and distribution according to the variation of sirocco fan surface roughness(Ra, ${\mu}m$), revolutions(rpm) and salt water flow rate(mL/min). When sirocco fan surface roughness(Ra) was in the range of $0.27{\sim}7.65{\mu}m$, the spray particle size was $0.117{\sim}1.360{\mu}m$. And then more than 90% of spray particles were found to be less than $0.50{\mu}m$. When sirocco fan surface roughness(Ra) was in the range of $12.70{\sim}22.84{\mu}m$, the spray particle size was $2.51{\sim}184.79{\mu}m$ and more than 98% of spray particles were found to be less than $13.59{\mu}m$. To analyze the effect of fan rotation speed on the size and distribution of spray particles, when surface roughness Ra was fixed $0.27{\mu}m$ and fan rotation speed and salt water flow rate was respectively changed at 3,800~5,600 rpm and 2.77~8.28 mL/min, spray particle size was $0.314{\sim}0.541{\mu}m$. And when salt water flow rate was 9.74 mL/min and fan rotation speed was 3,800~5,200 rpm, spray particle size was in the range of $29.29{\sim}341.46{\mu}m$ and in case of 5,600 rpm more than 98.23% of spray particles were in the range of $2.51{\sim}13.59{\mu}m$.

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.339-351
• /
• 2004

This study was conducted to evaluate the effect of phased horticultural therapy(HT) program on the experience of psychologic therapy and the development of job and social integration in the mentally handicapped persons. In this study, the mentally handicapped persons participated in HT program were chosen in disabled person's welfare institute of Jeonnam. HT program was performed twice a week with 1 hour activity for 4 months. As a results, the mentally handicapped persons participated in HT program showed high interest of horticulture and improvement of self-respect and the high satisfactory degree of HT program. Therefore, the mentally handicapped persons were showed the experience of both physical and mental therapy, improvement of self-esteem scale and sociality in HT program. Also, the application of HT program with continuously interest will be showed high improvement of physical, psychological and sentimental. In the course of this HT program progress, horticultural therapist and social welfare officer were showed the limitation of role. Therefore the leaders of group for successful HT program be required the comprehensive plan of more efficient HT program and induced technique of continuously up-phased improvements in HT program progress.

• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.193-201
• /
• 2010

The aim of this study was to analyse the quality of Yukwa puffed by using a vacuum puffing machine and compare to deep-fried Yukwa. The effect of vacuum puffing condition including heating temperature(100-${160^{\circ}C}$), preheating time(0-8 min) and vacuum puffing time(5-20 min) on physical and microstructure characteristics of the Yukwa was investigated. Vacuum puffed Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 10 min puffing time had highest value in volumetric expansion ratio(10.04) and lowest value in bulk density(0.15 g/$cm^{3}$). The breaking strength showed the lowest value of 140 g/$cm^{3}$ in vacuum puffing Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time. The Yukwa puffed with the vacuum puffing machine at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time had the higher value of bulk density and the lower value of volumetric expansion ratio than those of deep-fried Yukwa. Increasing preheating time and vacuum puffing time caused an increase in white and an decrease in yellowness. The vacuum-puffed Yukwa exhibited smaller and uniform cell structure, while deep-fried Yukwa exhibited apparently in larger pores inside and smaller pores near the surface layer. The optimum condition of vacuum puffing machine for the production of vacuum-puffing Yukwa was ${120^{\circ}C}$ heating temperature, 4 min preheating time and 5 min puffing time.

• Cross-Cultural Studies
• /
• v.53
• /
• pp.163-192
• /
• 2018

The purpose of this paper was to examine universal dependency UD application cases of Korean and Japanese with similar morphological characteristics. In addition, UD application and improvement methods of Korean were examined through comparative analysis. Korean and Japanese are very well developed due to their agglutinative characteristics. Therefore, there are many difficulties to apply UD which is built around English refraction. We examined the application of UPOS and DEPREL as components of UD with discussions. In UPOS, we looked at category problem related to narrative such as AUX, ADJ, and VERB, We examined how to handle units. In relation to the DEPREL annotation system, we discussed how to reflect syntactic problem from the basic unit annotation of syntax tags. We investigated problems of case and aux arising from the problem of setting dominant position from Korean and Japanese as the dominant language. We also investigated problems of annotation of parallel structure and setting of annotation basic unit. Among various relation annotation tags, case and aux are discussed because they show the most noticeable difference in distribution when comparing annotation tag application patterns with Korean. The case is related to both Korean and Japanese surveys. Aux is a secondary verb in Korean and an auxiliary verb in Japanese. As a result of examining specific annotation patterns, it was found that Japanese aux not only assigned auxiliary clauses, but also auxiliary elements to add the grammatical meaning to the verb and form corresponding to the end of Korean. In UD annotation of Japanese, the basic unit of morphological analysis is defined as a unit of basic syntactic annotation in Japanese UD annotation. Thus, when using information, it is necessary to consider how to use morphological analysis unit as information of dependency annotation in Korean.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.4
• /
• pp.68-80
• /
• 2019

This study is to provide basic data for the user-oriented design for a middle school meditation forest in the future by analyzing the physical environment characteristics of existing middle school meditation forests, the users' utilization behavior, and the degree of the importance satisfaction. For this purpose, 24 evaluation indices based on site characteristics, naturalness, functionality, and the effectiveness of meditation forest sites were selected for analysis of importance satisfaction. We surveyed and analyzed the students and teachers of two middle schools 'A' and 'B' in Gwangju Metropolitan City. The results of this study are as follows. First, the perception and utilization rates of the meditation forests by students was significantly lower than teachers at both schools. 'A' school has a better use and recognition rate than the 'B' school. Second, the purposes of using meditation forests were rest (49.6%), weekday lunchtime (63.6%), with friends (65.0%) or colleagues (60%), and short (less than 10 minutes) rests (68.6%). They preferred flowers (30.0%) and shading plants (28.9%), mainly using shelters (57.9%) and walking trails (37.1%). Third, as a result of the importance of satisfaction analysis, the average score of the 24 items importance (3.81), higher than the satisfaction (3.62). The 24 items positioned in 4 quadrants are as follows: Nine items are in the I quadrant for 'persistent maintenance'. Three items are in the II quadrant for 'priority correction'. Seven items are in the quadrant III for 'low priority in the management and operation'. Five items are in the quadrant IV for 'avoid over effort'. For the comparison of two middle schools' satisfaction, 'A' school satisfaction was higher than 'B' school for 16 items, which showed a statistically significant difference. It is believed that the users in 'A' school are more satisfied than 'B' school because it has more forests and trails, better accessibility, and a variety of plant types and planting areas in the A school meditation forest. The results of the overall satisfaction analysis showed a significant difference between 'A' school (68.0%) and 'B' school (47.2%) as 'A' school has better shelters and trails. The rankings of the most satisfying space are walking trails (1st place) and shelters (2nd place). The reason for the highest satisfaction was for rest (stress relief and emotional support) in both 'A' and 'B' schools.

• Clean Technology
• /
• v.25 no.3
• /
• pp.223-230
• /
• 2019

This research was performed to evaluate the characteristics of food waste from 5 areas in Gangwon Province, Korea and to predict the $CH_4$ gas production rate. Food wastes were sampled in July and September, 2017. The amount of methane gas generation was evaluated through the biochemical methane potential (BMP) test and a calculation method using chemical composition. Average bulk density and pH of the food wastes were in the range of $0.758{\sim}0.850g\;cm^{-3}$ and 4.29 ~ 4.75, respectively. By physical composition, vegetables were the highest with 56.43 ~ 72.81% with fruits recording 5.31 ~ 8.95%, cereals 1.60 ~ 18.73%, fish and meat 4.47 ~ 12.11%, and filtrate 1.76 ~ 3.64%. The average water content was 69.30 ~ 75.87%, and VS and ash content were 22.50 ~ 27.98% and 1.63 ~ 2.48%, respectively. In addition, $BOD_5$, $COD_{Cr}$, and $COD_{Mn}$ were in the ranges of $17,690.3{\sim}33,154.9mg\;L^{-1}$, $106,212.3{\sim}128,695.5mg\;L^{-1}$, and $51,266.1{\sim}63,426.3mg\;L^{-1}$, respectively. The NaCl content ranged from 0.81 to 1.17%. The results of elemental analysis showed that the contents of C, H, O, N, and S were 44.87 ~ 48.1%, 7.12 ~ 7.57%, 40.13 ~ 43.78%, 3.22 ~ 4.14%, and 0.00 ~ 0.02%, respectively. In a comparison of the methane production yield per VS mass of food waste, there was no significant difference between the cumulative amount (${0.303{\sim}0.354m_{CH4}}^3\;{kg_{VS}}^{-1}$) by the BMP test and the theoretical amount (${0.294{\sim}0.352m_{CH4}}^3\;{kg_{VS}}^{-1}$) calculated by chemical composition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.740-748
• /
• 2018

This study was conducted to investigate the effects of dietary supplementation of enzyme complex (metalloprotease and xylanase) on growth performance, carcass characteristics and meat storability of broiler chickens. The experiment utilized a 2 (basal and low spec diets) ${\times}$ 3 (0, 0.5 or 1 g/kg of enzyme supplementation) factorial arrangement. A total of 360 male Ross broilers were randomly assigned into the following six groups: BD-T0 (basal diet + enzyme complex 0 g/kg), BD-T1 (basal diet + enzyme complex 0.5 g/kg), BD-T2 (basal diet + enzyme complex 1 g/kg), LD-T0 (low spec diet + enzyme complex 0 g/kg), LD-T1 (low spec diet + enzyme complex 0.5 g/kg), LD-T2 (low spec diet + enzyme complex 1 g/kg). Feed and water were provided ad libitum for 42 days, during which time feed intake and body weight were measured at one-week intervals. After the feeding trial, chickens were slaughtered by exsanguination and samples were collected. Feed intake was lower in the enzyme supplemented groups than the non-supplemented groups (p<0.05), as were body weight and gain (p<0.05). Thus, the feed conversion ratio improved in the enzyme supplemented groups relative to the non-supplemented groups (p<0.05). The carcass rate and production index were also significantly improved by supplementation with enzyme complex (p<0.05). Finally, the thiobarbituric acid reactive substances (TBARS) values were lower in the enzyme supplementation groups after 6 storage days (p<0.05). In conclusion, dietary supplementation with enzyme complex including metalloprotease and xylanase improved growth performance, carcass characteristics, and storability of broiler chicken meat.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.2
• /
• pp.61-75
• /
• 2021

Recently, as the occurrence frequency of sudden floods due to climate change increased and the aging of the existing spillway, it is necessary to establish a plan to utilize an auxiliary spillway to minimize the flood damage of downstream rivers. Most studies have been conducted on the review of flow characteristics according to the operation of auxiliary spillway through the hydraulic experiments and numerical modeling. However, the studies on examination of flood damage in the downstream rivers and the stability of the revetment according to the operation of the auxiliary spillway were relatively insufficient in the literature. In this study, the stability of the revetment on the downstream river according to the outflow conditions of the existing and auxiliary spillway was examined by using 3D numerical model, FLOW-3D. The velocity, water surface elevation and shear stress results of FLOW-3D were compared with the permissible velocity and shear stress of design criteria. It was assumed the sluice gate was fully opened. As a result of numerical simulations of various auxiliary spillway operations during flood season, the single operation of the auxiliary spillway showed the reduction effect of maximum velocity and the water surface elevation compared with the single operation of the existing spillway. The stability of the revetment on downstream was satisfied under the condition of outflow less than 45% of the design flood discharge. However, the potential overtopping damage was confirmed in the case of exceeding the 45% of the design flood discharge. Therefore, the simultaneous operation with the existing spillway was important to ensure the stability on design flood discharge condition. As a result of examining the allocation ratio and the total allowable outflow, the reduction effect of maximum velocity was confirmed on the condition, where the amount of outflow on auxiliary spillway was more than that on existing spillway. It is because the flow of downstream rivers was concentrated in the center due to the outflow of existing spillway. The permissible velocity and shear stress were satisfied under the condition of less than 77% of the design flood discharge with simultaneous operation. It was found that the flood damage of downstream rivers can be minimized by setting the amount allocated to the auxiliary spillway to be larger than the amount allocated to the existing spillway for the total outflow with simultaneous operation condition. However, this study only reviewed the flow characteristics around the revetment according to the outflow of spillway under the full opening of the sluice gate condition. Therefore, the various sluice opening conditions and outflow scenarios will be asked to derive more efficient utilization of the auxiliary spillway in th future.