• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.2
• /
• pp.164-174
• /
• 2007

Phenomena of hydraulic transient such as water hammer should be analyzed to design the pipeline systems effectively in dam. Surge tanks generally are used to reduce change in pressure caused by hydraulic transient from load changes on the turbines. In this study, the appropriate scale of surge tank with chamber is investigated for dam safety management. The variation of water level in the surge tank are computed using governing equation. Using the Thoma-Jaeger's stability condition, static and dynamic stability are investigate for the cases of flood water level, normal high water level, rated water level and low water level. Finally appropriate diameters of shaft and chamber are determined in the surge tank with chamber.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.360-368
• /
• 2008

A lumped parameter model of Li-ion battery in hybrid electric vehicle(HEV) is constructed and system parameters are identified by using recursive least square estimation for different C-rates, SOCs and temperatures. The system characteristics of pole and zero in the frequency domain are analyzed with the parameters obtained from different conditions. The parameterized model of a Li-ion battery indicates highly dependent of temperatures. To estimate SOC and polarization voltage, a Luenberger state observer is utilized. The P- or PI-gains of observer based on a suitable natural frequency and damping ratio is adopted for the state estimation. Satisfactory estimation accuracy of output voltage and SOC is especially obtained by a PI-gain. The feasibility of the proposed estimation method is verified through experiment under the conditions of different C-rates, SOCs and temperatures.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.4
• /
• pp.8-13
• /
• 2010

The constant velocity internal grinding is a popular process for studying axle machine design and process in automobile industry. In this study, The program which gives the data of wheel size and truing diameter of ball groove is developed. As a result I obtained the data of grinding conditions makes good surface roughness get a grinding conditions. The grinding characteristics and conditions of constant velocity joint were investigated with respect to grinding feed, cutting depth, grinding time. At machine failure, the results were suddenly increased and the detailed surfaces were extremely obtained. Grinding condition was big more affected by grinding depth, grinding speed and grinding time.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.690-692
• /
• 2005

Among many other alternative energy resources, small scale hydropower has been brought into attention as a reliable source of energy today, which had been relatively neglected since 1960s. Present low head of Francis turbines and small scale hydro turbines, however, have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develope the Francis turbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the changable design conditions could be attained. The Francis turbine of a new concept was designed based on changable design conditions, hydrodynamics and theory of power transmission.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.338-339
• /
• 2018

최근 분산전원 시스템 개발로 인해 계통연계 인버터의 사용이 증가해 왔다. 계통연계 인버터의 주요한 역할은 계통연계 환경에서의 안정적인 운전과 계통 사고 시 중요 부하에 대한 연속적인 전력을 공급하기 위한 독립운전에 있다. 각 모드 전환시의 출력전압의 변동성과 과도응답 특성을 개선하기 위해 최근 다중 루프 및 간접 전류 제어 방식이 계통연계 인버터에 적용되었다. 하지만 이러한 제어 방식은 캐패시터 전압 및 인버터 전류의 측정이 요구되어 시스템의 비용 및 복잡성을 증가시키게 된다. 본 논문에서는 이산시간 상태공간에서의 전상태 관측기를 설계하여 무순단 절체 동작 시 제어기가 요구하는 변수를 추정하고 이를 궤환신호로 사용하여 시스템의 설계 비용 및 복잡성을 줄인다. 또한 계통연계 시 계통유입 고조파 전류를 억제하기 위해 일반적으로 사용되는 기존 공진형 제어기의 과도 응답을 개선하기 위해 이산시간에서 슬라이딩 모드와 공진제어기가 결합된 새로운 제어기 구조를 제안한다. 제안된 기법의 타당성은 PSIM 시뮬레이션을 통하여 입증된다.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.853-861
• /
• 2010

Experimental conditions are set with environmental factors which can affect ship navigation. In FTS simulation, infinite simulation can be theoretically tested with no time constraint but the simulated result with the same experimental condition is repeated due to mathematical model. RTS simulation can give more resonable results but costs at lest 30 minutes for only experimental time. The mixture of two simulation methods using probability density function has been proposed: some of experimental conditions in which ship-handling is most difficult are selected with FTS and are tested in RTS. It has drawback that it does not consider the navigation route but aggregated track index. In this paper, anomaly detection approach is suggested to select some experimental conditions of FTS simulation which are most difficult in ship-handling during the navigation route. An empirical result has been shown.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.740-746
• /
• 2009

자연 상태의 하천의 하상은 흐름에 의해 끊임없이 변하지만 기록적인 홍수 등 특별한 자연 현상이 없는 한 유사이송에 평형을 이룬 상태라 할 수 있다. 하지만 유역 토지이용의 변화와 골재 채취, 댐과 저수지의 건설 등과 같은 인위적인 요인들은 하천의 평형 상태를 파괴하고 유사이송문제 및 하상변화 등과 같은 문제점을 야기 시킨다. 따라서 홍수피해를 경감시키고 홍수조절을 목적으로 계획하는 홍수조절댐의 경우 홍수 발생 기간 외에는 상류와 하류 하천 간의 흐름 차단을 최대한 억제하고 상류로부터 유입되는 유사가 댐 상류부에 퇴적되는 것을 방지하기 위해 댐에 상시 개방되어 있는 배사관과 생태통로를 설치하도록 계획되기도 한다. 국내에서는 임진강 유역에서 홍수피해 저감을 위한 한탄강댐의 건설이 계획되었으며 유사이송문제와 생태환경 문제를 고려하여 배사관과 생태통로를 설치하도록 설계하였다. 본 연구에서는 1차원 HEC-6모형을 이용하여 대상 유역인 한탄강 홍수조절댐 상류하천에 대해 댐 건설 전과 후의 수위변화 및 하상변동 모의를 수행하였으며 지속 기간별 평수량과 연평균유량에 대한 장기하상변동을 분석하였다. 또한 과거유량수문자료를 이용하여 산출된 1년 동안의 대표 유량수문곡선을 HEC-6 모의에 적용하여 유량변화가 연속적으로 발생했을 경우의 하상변화를 1년과 100년 기간에 대해 각각 분석하였다. 그 결과 지속 기간이 길어짐에 따라 상류 7.8 km에서는 퇴적과 침식 작용이 활발히 일어남을 알 수 있었다. 하지만 댐 건설 전과 후의 하상 변화의 차이가 크지 않았다. 또한 연평균 유량 조건을 복합적으로 적용했을 때가 지속적인 연평균유량을 적용했을 때보다 하상변화가 더 크게 발생하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.32-39
• /
• 2018

Repairing timing and the extended service life with repairing are very important for cost estimation during operation. Conventionally used model for repair cost shows a step-shaped cost elevation without consideration of variability of extended service life due to repairing. In the work, RC(Reinforced Concrete) Column is considered for probabilistic evaluation of repairing number and cost. Two mix proportions are prepared and chloride behavior is evaluated with quantitative exterior conditions. The repairing frequency and cost are investigated with varying service life and the extended service life with repairing which were derived from the chloride behavior analysis. The effect of COV(Coefficient of Variation) on repairing frequency is small but the 1st repairing timing is shown to be major parameter. The probabilistic model for repairing cost is capable of reducing the number of repairing with changing the intended service life unlike deterministic model of repairing cost since it can provide continuous repair cost with time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.665-675
• /
• 2008

The objective of this paper is to provide an approximate cost estimating model for tunnel that can be utilized both in quick construction cost estimating for design alternatives, and in evaluating efficiently the cost effects according to the environmental changes during design and construction stage. To meet this requirement, this study analyzes critical cost factors influencing tunnel construction costs. The cost factors include 7 elements such as rock drilling method, advancing method, type of detonator, loader capacity, unit weight and soil volume change factor, length of tunnel. This paper investigates the cost variance according to the change of the cost factors. The result is expected to be used in formulating approximate tunnel cost estimating model.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.588-593
• /
• 2011

In this study, the performance analysis method for ramjet engine system with atmospheric air disturbance was proposed. Flight path was determined to satisfy dynamic pressure constant at each flight altitude. The atmospheric air disturbance incoming into a engine intake was simulated by the model Tank proposed. The performance parameters was investigated at each flight condition with air disturbance. Engine operation stability was evaluated as analysis of the normal shock position.