• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.357-368
• /
• 2008

On July 31, 2008, the Government issued the construction and operation permit for the first low and intermediate level radioactive waste disposal facility in the Republic of Korea. In this paper, the fundamental regulatory framework, regulatory requirements and technical standards of the disposal facility are introduced, and the phased review process adopted for evaluation of the safety of the facility is briefly described. The Atomic Energy Act sets forth a stepwise regulatory framework for the whole life-cycle of the disposal facility such as siting, design, construction, operation, closure and institutional control. More detailed regulatory requirements and technical standards are stipulated in the subsequent regulations of the Atomic Energy Act and a series of Notices issued by the Ministry of Eduction, Science and Technology. The Korea Institute of Nuclear Safety, as entrusted by the Ministry under the Atomic Energy Act, conducted safety review on the disposal facility, and evaluated the compliance with relevant criteria in all technical elements(i.e. siting and structural safety, radiological environmental impact, operational safety, systems and components, quality assurance, and total systematic performance assessment, etc.). The overall safety review process can be phased into inception phase, initial review phase, main review phase and completion phase. The review results were reported to and deliberated by the five Sub-committees of the Special Committee on Nuclear Safety, and then reported to the Ministry. The Ministry issued the construction and operation permit of the disposal facility through the deliberation of the review results by the Nuclear Safety Commission. Hereafter, the safety of the repository will be reassured by a series of subsequent regulatory inspections and reviews under the Atomic Energy Act. In addition, the licensee's continuous implementation of the "Safety Promotion Plan" may also enhance the long-term safety of the repository and contribute to build-up the confidence of the safety case.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.2
• /
• pp.3-36
• /
• 2015

As of end of 2014, the population engaging in aviation activities for leisure has reached approximately 13 million, where approximately 356 cases involve a general aircraft, 200 cases involve light aircraft, and 636 cases involve an ULM. The industry for leisure has become a very promising industry in line with rapidly rising living standards which are expected to further increase in the future. The demand for such services is expected to increase over time. The purpose of this paper is to review the development and site selection of airfields in anticipation of these developments in the industry. While the government also has experience in the review of airfield location and candidate sites, it is not the government that carries out the actual construction. As such, the feasibility of the site needs to be verified in terms of actual construction. This study identified factors for Site Selection of factors through a review of related documents and existing research reports. A questionnaire was also used to collect the views of experts in the field, which was then analyzed. The Research model was confirmed in the layered form for an AHP analysis. The factors for Site Selection were identified as the technical / operational factors and economic / political elements for a two-stage configuration. The third step consisted of technical and operational elements. The final step is was constructed a total of 11 elements (weather, surface conditions, obstacle limitation surface, airspace conditions, operating procedures, noise problems, environmental issues, availability of facilities, construction and investment costs, contribution to the local economy, accessibility, demand / the proximity of demand). The surveys are conducted for more than 10 General and light aircraft pilots, professionals, and instructor. The analysis results showed a higher level in the technical / operating elements (73.2%) in the first step, while the next step sawa higher level of the operational elements (30.9%) than the other. The factors for Site Selection were any particular elements did not appear high, the weather conditions (17.5%), noise problems (19.8%), the proximity of demand (6%), accessibility (5.7%), environmental issues (11.1%), availability of facilities (8%), airspace conditions (7.9%), obstacle limitation surface (12%), construction and investment costs (4.2%) and to operating procedures (4.9%), contribution to the local economy (3.8%).

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.258-270
• /
• 2012

Purpose: Use of inappropriate statistical methods may lead to incorrect conclusions and a waste of valuable resources. The goal of this study was to assess the frequency and the types of several common statistical errors in the published articles of the Journal of the Korean Academy of Prosthodontics (JKAP) for a 5-year period. Materials and methods: Of 336 articles in the JKAP published from 2006 to 2010, 255 articles using statistics were reviewed and classified by statistical method and year. The frequency and types of the statistical methods were examined, and the statistical errors were evaluated by the appropriateness of the experimental design, assumption check, independent outcomes, proper sample size and suitable use of statistical method. Statistical guidelines were completed based on the appropriateness. Results: Of the 255 articles using statistics, 193 articles (75.9%) used inferential statistics and 153 articles used SPSS statistical software (60.0%). Of the articles using inferential statistics, the three most frequently used statistical methods were ANOVA (41.5%), t-test (20.0%), and the nonparametric method (16.9%). The average rate of statistical errors was 61.2 percent, similar to the rate reported by several studies completed for the medical journal. Conclusion: After the whole analysis of the difference among the groups, post-hoc tests for the pairwise comparisons are required. The optimal sample size calculation is an essential part of this study protocol. To minimize the occurrence of statistical errors, statistical guidelines were developed according to each statistical test procedure and will contribute to the academic improvement in the JKAP.

• Journal of The Korean Association For Science Education
• /
• v.31 no.1
• /
• pp.78-98
• /
• 2011

The purpose of this study was to analyze elementary school students' interpretation of data characteristics by cognitive style. Participants were elementary students in sixth grade who can use integrated inquiry process skills. The students were divided into two groups, analytic cognitive style and wholistic cognitive style according to their response to Cognitive Style Analysis. They performed scientific interpretation of data activity. To collect data for this study, participants recorded the result on scientific interpretation of data activity paper and researcher recorded the situation on videotape and interviewed with participants after the end of interpretation of data to get additional data. And the findings of this study were as follows: First, the study analyzed interpretation of data characteristics by the operator regarding different situations of interpreting data according to cognitive style. For example, in the intermediate state, analytic-cognitive style students showed high achievement in identifying variables, and wholistic-cognitive style students were active in using prior knowledge to interpret data. Second, the result of analysis on the direction of interpreting data and preference for data types in interpreting data activities according to cognitive style are as follows: Wholistic-cognitive style students showed relatively high perception of information through the top-down approach. On the other hand, analytic-cognitive style students usually used the bottom-up approach gradually expanding detailed information to the scientific question-related answer and showed a preference data of the table type. Through the result, this study aimed to help establish a data interpretation strategy for learners to solve problems based on understanding of interpretation of data characteristics according to learners' cognitive style, and purposed the instruction design suggesting the data requiring various data interpretation strategies to develop learners' data interpretation ability.

• 선박안전기술공단연구보고서
• /
• s.4
• /
• pp.1-108
• /
• 2007

2007. 7. 23 IMO의 NAV(항해안전전문위원회)53차 회의에서는 e-Navigation을 해상에서의 안전, 보안, 해양환경보호를 목적으로 전자적인 수단에 의해 선박과 육상에서 해양정보를 수집, 교환, 표시함으로써 항구와 항구간의 항해 및 관련된 서비스를 향상시키는 것으로 정의하고 있다.2005년 11월 영국의 교통부 장관 Stephen 박사는 Royal Institute ofNavigation에서의 연설에서 해상안전과 환경보호를 위하여 선박의 항해를 감시하는 관제소 및 항행하는 선박에 유용하고 정확한 정보가 더 많이 필요함을 역설하였다. 그리고 첨단 기술에 의해 자동화된 항공 항법분야를 예로들면서, 선박의 항법 분야도 항해와 관련된 모든 시설 및 작업을 전자적 수단으로 대체하는 개념인 e-Navigation으로 전환되어야 하며 영국은 이에 필요한 작업을 주도하겠다는 의견을 피력하였다. Stephen은 e-Navigation 도입으로 얻을 수 있는 이익으로 첫째, 항해 실수로 인한 사고 확률저감, 둘째,사고 발생 시 인명 구조 및 피해 확산을 위한 효율적 대응, 셋째, 전통적인항해시설 설치 불필요로 인한 비용 저감, 넷째 선박입출항 수속의 간편화 및항로의 효율적 운용으로 인한 상업적 이익 등을 들었다. 반면에e-Navigation 체계로 전환 시 예상되는 장애로는 첫째, 체계 구축을 위한 비용(특히 개발도상국가들의 경우 어려움 예상), 둘째, e-Navigation의 성과 달성을 위하여 세계 전 해역의 모든 선박이 e-Navigation 체계에 동참하도록유도하는 문제, 셋째, 전자해도 표시 및 선교 장비들에 대한 표준화 문제, 넷째, 육상에 설치할 e-Navigation 센터의 설계 및 구축 등을 꼽았다.IMO는 2005년 81차 MSC(해사안전위원회) 회의에서 영국이 일본, 마샬아일랜드, 네덜란드, 노르웨이, 싱가포르, 미국과 공동으로 제안한 ‘e-Navigation전략 개발’ 의제를 2006년 82차 MSC 회의에서 채택하고, NAV(항해 전문위원회)를 통하여 2008년까지 e-Navigation의 구체적 개념을 정립하고 향후 개발하여야 할 전략적 비전과 정책을 수립하기로 하였다. 이어서 영국을 의장으로 e-Navigation 전략개발 통신작업반이 구성되었는데, 지난 년간 19개국, 16개 전문기관이 참여하여 아래의 작업이 수행되었다. ○ e-Navigation 개념의 정의와 목적 ○ e-Navigation에 대한 핵심 이슈 및 우선 순위 식별 ○ e-Navigation 개발에 따른 이점과 단점의 식별 ○ IMO 및 회원국 등의 역할 식별 ○ 이행계획을 포함한 추가 개발을 위한 작업계획의 작성 IMO에서 수행되고 있는 e-Navigation 전략 개발 의제 일정은 2008년까지이다. 이 전략 개발에 있어서 중요한 요소는 e-Navigation이 포함할 서비스범위, 포함하는 서비스 제공에 필요한 인프라 및 장비의 식별, 인프라 구축및 운용비용을 부담할 주체에 대한 논의, e-Navigation으로 인한 이익과 투자비용에 대한 비교 분석 등이다. 이 과정에서 정부, 선주, 항만운영자, 선원등의 입장 차이와 선진국과 개발도상국 간의 경제 수준 차이는 전략 개발에있어 큰 어려움을 줄 것이므로, 이들이 합의된 전략을 만들기 위해서는 예정된 기간보다 다소 늦어질 가능성도 있다.e-Navigation 전략 개발이 완료되면 1단계로는 해상교통 관제시스템, 선박선교 장비, 무선 통신장비 등에 대한 표준화 작업이 이루어질 것이다. 이 과정에서 각국 간에 자국 보유 기술을 표준화시키기 위한 경쟁이 치열할 것으로 예상된다. 2단계에서는 e-Navigation 체계 하에서의 다양하고 풍부한 서비스 제공을 위한 관련 소프트웨어 및 하드웨어의 개발이 이루어질 것으로전망되는데, 이는 지난 10년간 육상에서 인터넷망 설치 후 이루어진 관련 서비스 산업의 발전을 돌아보면 쉽게 짐작할 수 있을 것이다.e-Navigation 체계 하에서 선박의 항해는 현재와는 전혀 다른 패러다임으로 바뀔 것이다. 예를 들어 현재 입출항 시 요구되던 복잡한 절차는one-stop 쇼핑 형태로 단순화되고, 현재 선박 중심의 항해에서 육상e-Navigation 센터가 적극적으로 관여하는 항해 체계로 바뀔 것이며, 해상정보의 공유와 활용이 무선 인터넷을 통해 보다 광범위하게 이루어질 것이 다.e-Navigation의 잠재적 시장 규모는 선박에 새로이 탑재될 지능형 통합 항법시스템 구축과 육상 모니터링 및 지원 시스템 등 직접 시장이 약 50조원,전자해도, 통신장비, 관련 서비스 컨텐츠 등 간접 시장의 규모가 150조원으로 총 200조원으로 대략 추산하고 있다. 향후 이 거대한 시장을 차지하기 위한 전략 수립이 필요한 시점이다. 지금까지 항해 장비 관련 산업은 선진국의일부 업체들에 의해 독점되어 왔다. 우리나라는 조선과 해운에서 모두 선진국임에도 불구하고 이 분야에서는 대부분 수입에 의존해 왔다. e-Navigation체계 하에서는 전체 시장이 커지고 장비의 사양이 표준화됨에 따라 어느 소수 업체가 현재처럼 독점하기는 더 이상 어려울 것으로 예상된다. 따라서e-Navigation은 우리나라도 항해 장비 분야 시장을 차지할 수 있는 좋은 기회라고 할 수 있다. 특히 조선 1위의 장점을 적극 활용한다면 다른 나라보다우위의 경쟁력을 확보할 수도 있다. 또한, 서비스 분야의 시장은 IT 기술과밀접한 관계가 있으므로 IT 강국인 우리나라가 충분한 경쟁력을 갖고 있다고 할 수 있다.그러나, EU를 비롯한 선진국에서는 이미 e-Navigation 에 대비한 연구를10여년 전부터 수행해 왔다. 앞에서 언급한 EU의 MarNIS 사업은 현재 거의마무리 단계로 당장 실용화 할 수 있는 수준에 있는 것으로 보인다. 늦었지만 우리도 이를 따라잡기 위한 연구를 서둘러야 할 것이다. 국내에서도e-Navigation의 중요성을 깊이 인식하고, 2006년에는 관련 산학연 전문가들로 작업반을 구성하여 워크숍 등을 개최한 바 있다. 또한 해양수산부에서도e-Navigation 핵심기술 개발을 위한 연구사업을 기획 추진하고 있다.그러나 현재 항해통신장비들의 기술기준은 ITU의 전파규칙(RR)과 IMO결의 및 SOLAS 협약을 따르고 있는데 이들 규약이나 결의에 대한 국제적인 추이와 비교할 때 국내의 기술은 표준화되지 못한 부분이 많은 실정이다.본 연구에서는 e-Navigation sytem중 표준화가 필요한 요소와 전자해도,AIS 등 e-Navigation(통합전자항법시스템)관련 국내산업현황 실태조사를 통해 국내 e-Navigation기술개발 동향에 대해 조사하고자 한다.

• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.15-21
• /
• 2005

This Study was conducted to investigate the effects of microbial phytase in low phosphirus and calcium level diet on the performance and nutrient digestibility in laying hens. One hundred ninety two, 50 wks old, ISA brown commerical layers were used for 12 weeks feeding trial after 7-d adjustment period. Four dietary treatments included CON(control; Co.), P2 ($0.06\%$ Natuphos, BASF) and P3 ($0.06\%$ PHOSMAX, GENOFOCUS). Ca and available P concentrations of P1, P2 and P3 were 90 and $50\%$ of NRC recommecdations to accentuate difference in response to phytase availability. In whole period, egg production was not affected by treatments. At 12 weeks, egg weight was significantly increased in adding phytase treatments (P<0.05). Egg shell thickness was increased in P1, P2 and P3 treatments compared with control (P<0.05) at 9 weeks. Ca concentration of serum tended to decrease in P1 treatment without significant difference (P>0.05). Ca and P concentrations of tibia were higher in layers fed dietary phyrase than those fed control diet without significant difference (P>0.05). Digestibilities of DM, N and ash were improved in P1 treatment compared with P2 and P3 treatments (P<0.05). Ca and P digestibilities were the highest in P2 treatment (P>0.05), but was not significant difference between control and P1 treatments.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.3-55
• /
• 2009

Records of architectural cultural properties, in case of accidents, show who are to blame, present what evidences are to establish the cause, and also are used for checking if there were any problem in policies and regulations in preserving and caring architectural cultural properties. These records are of great importance in their roles and are of essential use regardless of time and space. Considering its significance, In that architectural cultural properties requires setting clear goals and directions and as well, criteria, for management, we need methods of systematical control and consideration for its characteristics. This research started with the sense of purpose that managing architectural cultural properties are in need of systematic and concrete control, based on the perception that they need protecting and transmitting. The goal of this thesis is to work on the current archiving status of architectural cultural properties by monitoring patterns and processes in archival administration, to diagnose problems by looking into the records creation and management, and to present the improvement plan which would lead to the architectural cultural properties' more efficient management and better use in the future. The management of architectural cultural properties begins with registering and assigning. Cultural Heritage Administration is in charge of control, supervision, and budget and local governments deal with direct management. Accordingly, records are by the hands of each local governmental body. Currently, each cultural property has its management depending on every different working environment in each governmental body. Architectural cultural properties needs managing in one body through the synthetic and unified, concrete and systematic manual and guide for management. Archiving architectural cultural properties have need of unitive management through a professional system, considering the physical characteristics and history of archiving. Unified management system will enhance efficiency and actual use of architectural cultural property records if one governmental body undertakes uniting records through standardization and professional supervision, and data-based unified search engine would enhance efficiency and actual use. Therefore, I suggest that Archives for Architectural Cultural Properties should be established as a professional Archives and wholly responsible body for the purpose of systematically and unifiedly managing architectural cultural property records with professional personnel and facility and transmitting their historical, cultural, and academic value. In Korea, studies up to the present have mainly focused on managing architectural records and records of drawing while few efforts were made to directly deal with managing architectural cultural properties themselves. The focus of this thesis is to study the current status and establish problems of the management of architectural cultural properties in administrative process, and as a result, to propose to establish Archives for Architectural Cultural Properties as a professional archives.

• Korean Journal of School Psychology
• /
• v.15 no.3
• /
• pp.399-431
• /
• 2018

The purpose of this study was to summarize the empirical literature on implementation of positive behavior support (PBS) within a multi-tiered system of supports in American and Korean schools and to compare its key features and outcomes in an attempt to suggest future directions for development of a Korean school-wide PBS model and implementation manuals as well as directions for future research. Twenty-four American articles and 11 Korean articles (total 35 articles) that reported the outcomes of implementation of PBS at a tier 1 and/or tier 2, or tier 3 level and that met established inclusion criteria were analyzed using systematic procedures. Comparisons were made in the areas of key features and outcomes of PBS in addition to general methodology (e.g., participants, design, implementation duration, dependent measures) at each tier of PBS. The results indicated that positive outcomes for student behavior and other areas were reported across tiers in all American and Korean studies. At the tier 1 level, teaching expectations and rules were the primary focus of PBS in American and Korean schools. However, Korean schools focused on modifying the school and classroom environments and teaching social skills whereas American schools focused on teacher training on standardized interventions or curricular by experts and teacher support during implementation of PBS. At the tier 2 level, more American studies reported implementation of tier 2 interventions within school-wide PBS, and Check/In Check/Out (CICO) was found to be the most commonly used tier 2 intervention. The results also indicated that in comparison to Korean schools, American schools were more likely to use systematic screening tools or procedures to identify students who need tier 2 interventions and more likely to promote parental involvement with implementing interventions. At the tier 3 level, more Korean studies reported the outcomes of individualized interventions, but more American studies reported that designing individualized intervention plans based on comprehensive functional behavior assessment results and establishment of systematic screening systems were focused when implementing individualized interventions. Furthermore, few Korean studies reported the assessment of procedural integrity, social validity, and contextual fit in implementing PBS across tiers, indicating the need for development of valid instruments that could be used in assessing these areas. Based on these results, limitations of the study and suggestions for future research are discussed.