• Survey Research
• /
• v.18 no.4
• /
• pp.127-147
• /
• 2017

Despite the importance of questionnaires, little survey methodology research on questionnaire design has been conducted in Korea. The purpose of this study was to explore whether two questionnaire forms (close-ended vs. open-ended questions) about 'the most important problem in Korea' elicited similar responses. During the 2016 Korean General Social Survey (KGSS), a random half of respondents were asked the open-ended question form and the remaining half were asked the close-ended question form. While the economy is the most mentioned response (35% vs. 33.2%) to both close-ended and open-ended question forms, there is similarity in the order of highly mentioned responses if we consider that 'politics' is not provided as one of response categories in the close-ended question form. The order of second to fourth response category is crime (24.4%), education (15.4%), and poverty (6.3%) to the closed-ended question form, and politics (10.8%), crime (9.5%), and education (7.6%) to the open-ended question form. Also, the characteristics of respondents who responded with the economy as being the most important are slightly different between the two halves in terms of age, household income, and satisfaction with economic condition. Our findings suggest that we need to be careful when we adopt questions developed in other countries and to consider using survey experiments in pre-testing questionnaire items.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.942-955
• /
• 2000

This paper proposes enhanced designs of global service logic and information flow for the mass-call based IN service, which increase call completion rates and optimize the resource in joint wired and wireless networks. In order to hanve this logic implemented, we design a Dynamic Queue Manager(DQM) applied to the call queuing service feature in the Service Control Point(SCP). In order to apply this logic to wireless service subscribers as well as wired service subscribers, the service registration flags between the Home Location Register(HLR) and the SCP are managed to notify the DQM of the corresponding service subscribers’ mobility. Hence, we present a dynamic queue management mechanism, which dynamically manages the service group and the queue size based on M/M/c/K queueing model as the wireless subscribers roam the service groups due to their mobility characteristics. In order to determine the queue size allocated by the DQM, we simulator and analyze the relationship between the number of the subscriber’s terminals and the drop rate by considering the service increment rate. The appropriate waiting time in the queue as required is simulated according to the above relationship. Moreover, we design and implement the DQM that includes internal service logic interacting with SIBs(Service Independent building Blocks) and its data structure.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.73-81
• /
• 2011

The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1073-1077
• /
• 2006

급속한 산업화로 인한 오염물질의 증가와 생물서식처의 감소는 수자원과 생태계를 위협하고 있다. 국내의 경우 수자원의 질을 개선하기 위해 '90년대 초부터 하수처리시설 등의 저감시설을 대폭 확충하였으나 현재까지 팔당호 등 주요상수원이 목표수질에 못 미치고 있으며 그 원인은 유입오염물질의 $22{\sim}37%$를 차지하는 비점오염원으로 지목되고 있다. 또한 생태.경관적 가치가 높은 수변지역은 각종 개발로 생물서식처가 급속도로 감소하여 종 다양성 보전 측면에서 대책마련이 시급한 실정이다. 이와 유사한 상황에 직면한 선진외국에서는 '하천회랑(river corridor)' 또는 '토양 및 생태시스템을 포함하는 수역과 육역의 점이(漸移)지대'를 의미하는 이른바 '수변완충지대(Riparian Buffer Zones)'의 오염정화 및 생태조성 효과 등의 연구를 통해 효율적 조성방안을 제시하고 있으며 다양한 형태로 현장에 적용하고 있다. RBZs의 일반적인 기능으로는, 유사나 오염물질의 여과 및 차단(필터링 효과), 영양염류의 저감, 하천변 식생을 통한 수자원의 정화 및 강턱의 안정화, 홍수로 인한 하천침식의 방지, 수변 생물 서식처 제공, 수변 그늘 제공에 의한 수온상승 방지, 심미 교육 위락 공간 제공 등이다. 본 연구에서는 외국의 RBZs(Riparian Buffer Zones)가이드라인을 참고하여 국내실정에 맞는 파일럿 규모의 시험완충지를 설계 및 조성하였다. 시험완충지는 남한강 연안에 초본류, 갈대류, 관목류, 자연식생, 혼합식생 등 5가지 'dry biotope'형태로 설치하여 1년간 계절별로 운영하였다. 또한 실험의 정량화와 다양한 조건변화를 위해 차수막, 위어, 유량.농도 조절장치, 라이시미터 등 보조시설을 설치하였고, 정기적인 모니터링을 실시하였다. 조사결과 외국사례를 살펴보면 RBZs의 적정 폭은 수질정화기능의 경우 $15{\sim}30m$, 생태서식처 기능은 최소 90m이상으로 제시되며, 시험완충지의 수질정화효과는 SS, T-N, T-P, TOC의 평균저감율이 각각 50%이상으로 나타났다. 식생모니터링 결과, 환삼덩굴 등 우점종의 잠식속도는 약 15일이며 갈대와 갯버들의 경우 우기시 인공목책호안과 동일한 침식방지 효과를 보이는 것으로 관찰되어 식생의 주기적인 모니터링과 지역 특성에 적합한 우점종 선정이 매우 중요한 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.437-445
• /
• 2015

The layout of facilities, in relation to information and navigational displays, has great influence on subway satisfaction, and tend to vary depending on the types of subway platform and transit station. However, until now, few studies have covered such aspects as of yet. Starting from this viewpoint, the purpose of this study was to use an IPA analysis technique to analyze that satisfaction on the importance of facilities to aid in accessibility, such as elevators and escalators, transit amenities and information and navigational displays depending on the types of platform and transit station. To do so, we've classified 15 metropolitan stations according to types of platform and transit station and analyzed differences in user importance and satisfaction as well as improvements for platforms and transit stations of similar type. By the analysis results of this study, we've concluded that the proper selection and positioning of elevator and escalator facilities and information and navigational displays was important when designing the subway station according to platform type (separate platform) and or according to the transit station type (cross, L, T types) where pedestrian flow heavily intersected. We considered that such analysis results would be helpful in the design of new stations and the enhancement of existing stations pursuant to a new direction that minimizes user inconvenience, and that improvement items should be developed first according to the platform and transit station types, which would be helpful in enhancing the efficiency of the subway improvement cost.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.3
• /
• pp.125-133
• /
• 2010

Although work-efficiency of construction machinery is a critical factor for estimating its workable-quantity perunit time, the efficiency figure table presented in the Poom-Sam that is used for Construction Cost Estimation of public sectors in Korea is very subjective for practical usage. In order to suggest objective work-efficiency table for a Pump-Dredger, domestic and overseas documentary records were investigated and on-going construction sites were also visited. Moreover, actual work quantities collected from the site visits were compared with the ones calculated based on the Standard Measurement Methods used in Japan. The research found that the table can be revised by means of detailing down by several factors, namely project type, depth of soil, undersea-site shape, and condition on the sea for better estimation of its workable-quantity. The research will be the foundation for applying the rapid development of Construction Equipment and technology to the appropriate cost estimations and the ground work of related studies.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.33-44
• /
• 2013

Personal Rapid Transit(PRT) has emerged as a promising transportation mode for transit-oriented sustainable communities. In this study, an alternative design of questionnaire survey is proposed in order to capture traveler's perception of an unexperienced transportation mode. This study aims at predicting the mode choice diversion behavior of potential PRT users who do not have experience of using it previously, considering their willingness-to-pay. The proposed model was applied to predict an aggregate forecast of PRT patronage for the city of Songdo where PRT is considered to be constructed. For validation of the proposed model, the price elasticity of PRT demand was analyzed, compared with existing models. The analysis results suggest that the proposed design of questionnaire survey is able to capture respondents' attitude and perception to unexperienced transportation mode in an effective manner. Also, they show that the proposed diversion rate model is more realistic than existing models in explaining the effects of users' willingness-to-pay for predicting PRT patronage.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.785-796
• /
• 2000

In this study, the possibility of application of TUNVEN model was investigated through the validation and calibration processes. In order to validate and calibrate the TUNVEN model developed in USA to obtain prediction of the quasi-steady state longitudinal air velocities and the pollutants concentrations by solving the coupled one-dimensional steady state tunnel aerodynamic and advection equations. The major input parameters such as the concentration data for CO and $NO_x$, meteorological data and traffic volume in Hawngryung tunnel were measured. Prior to preparing the input parameters, the sensitivity analysis was conducted to identify the input parameters which need to be most accurately estimated in TUNVEN program. In order to establish the relationships between the model values and the measured values, the linear regression analysis was applied. In linear regression analysis, the model values were taken as independent parameter(X) and the measured values were taken as dependent parameter(Y) for four cases of data sef. From the results of linear regression analysis, the correlation coefficient(r) for four cases were calculated more than 0.91 and the values of slope and interception were analyzed as 0.5~2.2 and 0.01~2.3 respectively. From the above results, we concluded that the suitability of TUNVEN model was identified in prediction the longitudinal pollutant concentrations in tunnel.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.35-41
• /
• 2002

본 연구는 기존 벼 펠렛종자 제조장치의 제조성능 및 제조 벼 펠렛종자 품질향상을 위하여 펠렛재료 공급부, 성형부, 펠렛종자 배출부를 개선 설계 제작하여 그 성능과 제조 벼 펠렛종자 특성을 구명함으로써 직파용 벼 펠렛종자 대량생산을 위한 제조장치 개발의 기초 자료를 얻고자 수행하였으며 그 주요 결과를 요약하면 다음과 같다. 펠렛재료의 일정한 공급과 펠렛재료가 성형 홈으로부터의 이탈하는 것을 줄이고, 펠렛종자의 완전한 배출이 가능하도록 한 벼 펠렛종자 제조장치를 설계·제작하였으며, 벼 펠렛종자 제조장치를 상토 종자혼합비, 성형롤의 회전속도에 따라 실험한 결과 벼 펠렛종자 제조 능력은 성능 개선 전의 펠렛종자 제조장치에 비하언 약 1.7배 향상된 제조능력을 보였으며, 성형률은 최대 약 89 %로 나타나 개선 전의 71%에 비해 18 %정도 성형률이 향상되었다. 그러나, 벼 종자손실률은 약 24% ∼ 49%로 거의 비슷한 수준인 것으로 나타났다. 제조된 벼 펠렛종자의 특성을 분석한 결과 펠렛종자의 구형률은 99.1%로 거의 구형으로 제조됨을 알 수 있었으며, 무게는 제조 직후에는 약 1.70 g, 완전 건조 후에는 1.31 g으로 나타났고, 직경은 약 12.03 mm에서 건조 후 11.53 mm로 축소되었다. 개선 전에 비해 직경과 무게가 약간씩 증가한 것으로 나타났다. 이러한 결과는 재선된 제조장치에서 펠렛재료가 성형롤의 성형 홈에 압축 공급되고, 펠렛재료의 손실도 적었기 때문으로 판단된다. 제조된 한 개의 벼 펠렛종자 내에 포함된 완전 벼 종자의 개수는 상토 종자혼합비가 커질수록 성형롤의 회전속도가 낮을수록 많아지는 것으로 분석되었으며, 모두 펠렛종자 당 평균 약 3 개 이상의 완전 벼 종자를 포함하고 있는 것으로 나타났다. 개선 전에 비하여 펠렛종자 내에 포함된 평균 완전 종자수도 증가하였으며, 3개 이상 완전 종자를 포함한 펠렛종자의 비율도 증가하여 유압에 의한 펠렛재료 공급과 성형롤의 개선효과가 있었던 것으로 보인다. 음지 건조 후 벼 펠렛종자의 압축강도는 약 132 N ∼ 152 N으로 조사되었으며, 개선전에 비하면, 약 30 %가 증가한 것으로 나타났다. 출아율 실험 결과 상토 종자혼합비 6 : 1, 성형롤 회전속도 7 rpm에서 건답직파는 100%, 답수직파는 97 %의 출아율을 보여 만족할 만한 결과를 얻었으나, 그 외의 경우는 거의 90 % 이하의 출아율을 보여 출아율을 높이기 위한 방안이 필요한 것으로 보인다. 본 연구의 벼 펠렛종자 제조장치의 적정운전 조건은 제조된 벼 펠렛종자의 특성과 출아율을 고려해 볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.743-750
• /
• 2017

It is important to ensure a uniform temperature distribution in greenhouses for the mushroom cultivation. The air temperature of the mushroom cultivation greenhouse is made uniform by supplying a constant air temperature with the underground air. The mushroom cultivation array in a greenhouse in seven columns and four rows can make smooth air flows between the rows and prevent air differences between the top and bottom. The buoyancy effect in the entering air of 0.5m/s based on following density difference depending on initial internal temperature needs to be considered. The locations of the Fan Coil Unit (FCU) and fan were defined through flow analysis in a greenhouse to distribute the optimal uniform temperature. In this study, the air conditioning system of a greenhouse with a sandwich heat insulting panel shape which is composed of a FCU and fan was designed by flow analysis. A relatively uniform temperature distribution can be formed because the circulation path of air becomes longer in the different locations of the FCU (inlet) and fan (outlet) through the internal temperature and flow analysis. The cultivation and quality uniformity of the mushrooms could be promoted through these environmental improvements.