• Journal of Korea Water Resources Association
• /
• v.31 no.2
• /
• pp.155-165
• /
• 1998

As an improvement on qualities of lives and a change in the habitual ways people eat require more water to be used for daily lives, the amount of wastewater generated from our usual lives is also expected to be in higher rate of consumption. The unit loading factor of sewage flow-rate based upon the number of people living in the apartment complexes has to be found for the design of the sewage or wastewater treatment facilities. These data are definitely thought to be useful for the plans to operate the sewage treatment facilities and for those to establish the plans toward a management of water qualities. Thus this study has shown that the data regarding the water supplies and the number of apartment residents within the 123 districts of KNHC(Korea National Housing Corporation) were collected and analyzed. One district in Seoul and the other local district were chosen an the experimental sites for th hourly, daily, weekly and seasonal measurements of the influent sewage flow-rate. The unit loading factor of influent sewage flow-rate were determined through the comparison of total sewage amount in combination with the number of people residing in two apartment complexes with supplying amount of water.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1317-1322
• /
• 2005

하수관거 설계시나 단지개발사업, 그리고 하수관거정비사업과 같이 오수처리시설의 적정 규모 결정을 위해서는 정확한 상수사용량 및 오수발생량 원단위가 요구되지만 국내의 경우 이러한 원단위에 대한 기초자료 부족과 자료의 신빙성 결여로 인해 적정 원단위를 결정하는데 어려움이 있다. 이러한 관점에서 단지개발이 이루어지는 도시에서는 도시의 규모, 입지조건, 기후조건, 생활양식 등 다양한 요인들이 고려된 오수발생패턴 및 발생량 조사가 필요하며, 조사된 원단위는 오수처리시설의 적정 규모 결정뿐 아니라 침입수/유입수 분석 및 하수관거정비에 대한 성과예측에도 활용될 수 있다. 본 연구에서는 현재 단지개발 및 하수관거정비사업이 진행중인 하남시의 표본이 될 수 있는 대표구역을 선정하고 그 지역에서 조사지역을 세부적으로 분류하여 각 지역별 오수발생특성을 분석하였다. 대상지역인 하남시는 총면적의 $97\%$가 자연녹지 및 생산녹지이며, 나머지 $3\%$는 일반주거지역 및 일반 상업지역으로 나뉜다. 그리고 도시계획상 공장지역으로 편성된 부분이 없어 앞으로도 하남시 대부분의 면적이 녹지와 주거/상업지역으로 구성될 것이다. 이러한 하남시의 특성을 고려하여 조사지역은 공장지역을 제외한 일반주거지역, 밀집주거지역, 영업지역으로 분류하였으며 이렇게 분류된 지역은 각각 오수발생패턴 및 오수농도에 대한 조사를 실시하여 오수발생특성을 분석하였고, 조사지역별 인구수 조사와 연계하여 원단위 자료를 추출하였다. 이렇게 조사된 자료들을 통해 침입수/유입수 분석에 요구되는 오수전환율, 야간생활하수량 비율을 산정하였으며, 차후 단지개발 및 관거정비 후에 발생하는 오수 발생특성과 비교분석을 통하여 하남시 지역의 오수발생특성에 대한 신뢰성 있는 자료로 활용될 것으로 기대된다. RMA2 모형을 이용하여 충주댐에서의 물의 흐름을 해석한 결과 옥순대교$\~$청풍대교 구간 사이에 댐 및 지형적 영향으로 인해 잘 발달된 와류가 하도 전체를 통하여 발생되고 있었고 이는 댐 부유물 정체현상이 나타나는 지점과 잘 일치하고 있었다.정함 후 감마분석에 의하여 구하였다. CF:CS 연령모델을 적용한 결과 깊이에 따른 supported $^{210}Pb$와 퇴적 속도는 0.91cm/year 인 것으로 산정 되었다.RS is a more advanced content-based image retrieval system than other systems which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.58-61
• /
• 2006

The object of this study was to develop an advanced method for fluid flow and oxygen transmission and increase adhesive property of microorganism to waste plastic vessel that was made of microorganism media. Through lab scale experiments, we found the optimum packed media volume rate and method, and when the optimum condition was applied to pilot plant, we confirmed possibility of advanced treatment. The sewage that was used in the test was the sewage disposal facility established in C and K elementary schools, which utilized waste plastic media oxidation engineering method. Analysis showed that removal efficiency of organic matter, SS, T-N and T-P was very high, that the sewage disposal facility maintained stability of treatment when changeable load of raw sewage flowed in.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.749-757
• /
• 2005

The present study analyzed actual cases of designed flow estimation method and designed flow rate of sewage pipe lines. In order to examine the effects of peak-hour demand factor estimation with given daily highest peak loading, we analyzed its effects on designed flow rate with changing the peak-hour demand factor from 2.0 to 10.0. The results of this study are as follows. When reviewing the recent designs, we found that 59.4% of pipe line with 250mm and 300mm diameter, which fall under minimum allowable pipeline did not meet the minimum velocity which is specified as 0.6m/sec in design standards. The pipe line that have minimal access population or have very low slope did not satisfy the minimum velocity. In estimating the designed sewage flow, the applied daily highest peak loading and hourly highest peaking loading were the load factor for the entire population of the planned area, and for the peak loading of the initial pipes connected to a very small population, we applied the same factor as that applied to the entire area and, as a result, the hourly highest flow was underestimated. Because, in case of the initial pipes, the method of applying the same peak loading to all subject areas is highly possible to produce underestimated design flow, when estimating the designed flow of the initial pipes connected to a small population need to adopt a rational flow factor according to the size of population. For this, it is considered to investigate and analyze raw data on daily and hourly variation of sewage flow.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.149-160
• /
• 1998

ReMP(Reliable Multipeer Protocol)는 멀티미디어 그룹 통신을 지원하기 위해 설계된 신뢰성 있는 다자간 전송 프로토콜이다ㅣ. 본 논문에서는 ReMP가 제한된 환경에서도 올바르게 동작함을 증명하였으며, 호스트에서의 처리량 관점에서 데이터 전송에 대한 성능 분석을 시도하였다. 또한 이를 토대로 ReMP는 성능이나 메모리 요구량 관점에 비추어 볼 때, 다른 비교 대상 프로토콜들보다 광범위한 용도의 멀티미디어 그룹 통신에 적용되어질 수 있음을 알 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.855-858
• /
• 2009

우리나라 농어촌 지역은 경제 발전과 함께 식생활의 개선 및 주택 개량, 수세식 화장실 보급 확대등으로 생활 오수 발생량이 크게 늘고 있는 실정이다. 이에 1994년부터 정부는 하수도법에 의한 수질개선 대책 사업등으로 마을 하수도 사업이 진행되어 왔으나, 현재 몇몇 농어촌 지역의 마을하수도 시설의 노후화 및 처리용량 부적합 등으로 현재 질소, 인의 처리효율이 방류수 수질기준에 적합하지 못하여 주변 수역의 수질개선을 위한 고도처리개선이 필요한 실정이다. 따라서, 본 연구는 소규모 마을하수도처리시설에 적용하고자 하는 고도처리개선공정을 GPS-X(General Purpose Simulator) 시뮬레이션으로 계획수질을 추정하여 대상시설에 적합한 고도처리개선공정을 설계하였다. 측정결과, 각 반응조별 시뮬레이션에서 혐기조, 무산소조, SBR1, SBR2 모두 일정한 처리형태를 보였으며, 시뮬레이션을 통한 유출수 예측결과, SS의 경우 97.3%, BOD 97.5%, TCOD 87.3%, TP 81.1%, TN 74.5%의 제거효율을 보여, 안정적인 고도처리효과를 나타내는 것으로 판단된다.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.45-54
• /
• 2023

Recently, with the development of the Internet of Things, research on protocols that can easily connect devices without a UI to the network has been steadily conducted. To this end, the Wi-Fi Alliance announced Wi-Fi Easy Connect, which can connect to a network using a QR code. However, since Wi-Fi Easy Connect requires a large amount of computation for safety, it is difficult to apply to low-power and miniaturized IoT devices. In addition, Wi-Fi Easy Connect considering scalability is designed to operate in a wired environment, but problems such as duplicate encryption occur because it does not consider a security environment like TLS. Therefore, in this paper, we analyze the Wi-Fi Easy Connect protocol and propose a protocol that can operate efficiently in the TLS environment. It was confirmed that the proposed protocol satisfies the existing security requirements and at the same time reduces about 67% of ECC scalar multiplication operations with a large amount of computation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.127-140
• /
• 1988

The management of sewage and rainfall runoff becomes an emerging problem with the growth of urban communities. From the uncontrollable excess intensity or amount of rainfall, the conditions of sewer surcharge or manhole overflow could be generated in the combined sewer network where municipal or industrial wastewaters and rainfall runoff flow. The predictive model far the prevention of property and human life losses from this inundation was studied in this research. In the development of a mathematical flow model for the combined sewer surcharge and overflow, the Preissmann Slot concept and the four-point implicit method of finite difference were utilized. For the usage in personal computer, the overlapping segment method that required less memory storage was adopted. Through the simulation of hypothetical sewer network, the conservation of discharge volume was checked, and the usefulness of the Preissmann Slot was assured from the temporal distribution of discharge and depth along the sewer network. Also the possible field application for the correction of sewer diameters and slopes in the design of sewer network which has no surcharge/overflow condition was suggested.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.67-75
• /
• 2008

This research is to develop the steel-concrete composite lining board using section shape steel. This lining board adopts section shape steel, rectangular pipe and H-beam, instead of roll-formed steel member commonly used in other composite lining board. Consequently, it reduces fabrication effort. Efficient section which can reduce the weight of steel of the lining board is made by placing the neutral axis of the section near the lower surface of concrete. Behavior of composite section is improved by adding bolts as shear connector. Static and fatigue tests were conducted to verify the performance of the composite lining board developed. The test results indicate that serviceability as well as safety of the lining board developed is secured with good margin and reduction of steel weight can be made about 27% compared with other composite lining boards.

• Convergence Security Journal
• /
• v.22 no.1
• /
• pp.81-92
• /
• 2022

The rapidly growing IoT market is expanding not only in general households but also in smart homes and smart cities. Among the major protocols used in IoT, ZigBee accounts for more than 90% of the smart home's door lock market and is mainly used in miniaturized sensor devices, so the safety of the protocol is very important. However, the device using Zig Bee is not satisfied with the omnidirectional safety because it uses a fixed key during the authentication process that connects to the network, and it has not been resolved in the recently developed ZigBee 3.0. This paper proposes a design method that provides omnidirectional safety to the ZigBee authentication protocol and can be quickly applied to existing protocols. The proposed improved ZigBee authentication protocol analyzed and applied the recently developed OWE protocol to apply ECDH, which has low computational volume and provides omnidirectional safety in IoT. Based on this, it provides the safety of the ZigBee authentication protocol, and it is expected that it will be able to provide user convenience as it does not require a separate certificate or password input.