• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.509-520
• /
• 2007

In this paper, we propose a real-time sensor node platform that guarantees the real-time scheduling of periodic and aperiodic tasks through a multitask-based software decomposition technique. Since existing sensor networking operation systems available in literature are not capable of supporting the real-time scheduling of periodic and aperiodic tasks, the preemption of aperiodic task with high priority can block periodic tasks, and so periodic tasks are likely to miss their deadlines. This paper presents a comprehensive evaluation of how to structure periodic or aperiodic task decomposition in real-time sensor-networking platforms as regard to guaranteeing the deadlines of all the periodic tasks and aiming to providing aperiodic tasks with average good response time. A case study based on real system experiments is conducted to illustrate the application and efficiency of the multitask-based dynamic component execution environment in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. It shows that our periodic and aperiodic task decomposition technique yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• Information Systems Review
• /
• v.17 no.2
• /
• pp.49-75
• /
• 2015

In this study, we propose an ubiquitous computing technology (UCT) based construction management (CM) framework which is composed of processes, information systems, and organizations. For this, we first define 14 promising UCT based CM tasks from 140 candidate tasks using a matrix analysis technique. After defining the 14 tasks, we survey the construction management experts with questionnaire of the importance, improvement possibility, ease of implementation of the tasks. Based on the survey results, we select three high priority tasks: material management, operation management, inspection and measurement management. We conceptually design the framework, that is, processes, information systems, and organizations for the 3 tasks to be more innovative by applying the UCT to the CM tasks. Finally, we apply the proposed framework to some construction fields and estimate the effectiveness of the framework. Estimation results show that the CM tasks can be performed more quickly with less man powers using the UCT-based CM framework.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2529-2539
• /
• 2013

The Korean construction industry has led the miraculous economic boost of Korea by providing solid domestic infrastructures such as highway, roads, and airports. It also played a critical role in global construction market and eaned more than 500 billions dollars in terms of their accumulated international orders. However, domestic construction market has significantly decreased in recent years due to the domestic political environments and global economic crisis. Therefore, the importance of international construction market cannot be more emphasized to the Korean construction market in order for the sustainable growth. There has been, however, little research in the area of identifying required competency elements for the Korean construction industry to stay successful in the global market. The main purpose of this study is to identify elements of core competency to increase global competitiveness for Korean construction industry. Core global construction competency elements were derived from the internal and external environmental analyses along with the extensive literature review, expert interviews and a survey. This study utilized the Importance-Performance Analysis (IPA) and a gap analysis in providing insights on the status competitiveness of the Korean construction industry in terms of required global core competency elements. The analysis shows that project management and financial management are the main areas for improvements required to engineering contractors while construction contractors need to take a more balanced approach among technical, project management, and financial management in order to increase their global competencies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.6
• /
• pp.1252-1260
• /
• 2017

As digital communication technology evolves, the diversity of maritime communication methods has benn increasing due to the emergence of new maritime communication technologies such as digital very high frequency (VHF) communication systems and LTE-M as well as traditional conventional maritime communication systems. At sea, all maritime communication methods may be available, but only some communication methods may be available depending on the location. In this paper, we propose a multi-band network selection (MNS) system that can provide seamless maritime communication service by switching to an optimal communication band among available communication systems, depending on network environment and user requirements. The proposed MNS system in the middleware layer is designed to be able to interface with two types of digital VHF communication systems that satisfy Annex 1 and Annex 4 of ITU-R M. 1842-1, LTE, and high frequency (HF) communication systems. We assign priority to each communication band, and design an optimal communication band determination algorithm based on this priority.

• Journal of Environmental Policy
• /
• v.10 no.4
• /
• pp.39-59
• /
• 2011

In this article, I would like to analyze the conditions in applying the LCC method for each construction type by selecting 10 apartment complexes among the Turn-key projects which have been ongoing for the last 5 years. In addition, this article will identify the problems to the application of double landscape architecture and suggest improvement measures. Among the 10 case targets, a total of 151 LCC analyses were conducted, and the average application ratio placing for each construction type was shown in the following order: architecture (34.4%)> electricity (21.2%)>machine (18.5%)>civil engineering (13.2%)>landscape architecture (12.6%). As numbers show, landscape architecture was the lowest. The ratio of LCC reduction amount was shown in the following order: machine (32.1%)> architecture (23.9%)>electricity (23.4%)>civil engineering (17.5%)>landscape architecture (3.1%). The field of landscape architecture had a reduction amount that was about 5 to 6 times lower than civil engineering which had a similar number of LCC analysis cases. The total LCC analysis items of landscape architecture was 19, including 15 double packing material, 1 building covering, 1 grass planting, 1 planting infrastructure, and 1 facility. The following measures were suggested to promote LCC analysis in landscape architecture: first, set an analysis item that considers the construction expense ratio of landscape architecture; second, legal regulation of landscape architecture and expansion of its application; third, prepare VE/LCC standards which are suitable for landscape architecture.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.1
• /
• pp.39-67
• /
• 1987

The purpose of this thesis is to suggest objective basic data for the environmental design through the quantitative analysis of the visual quality included in the physical environment of forest landscape. For this, landscape values of forest landscape have been evaluated by using the Iverson method, the images structure of forest landscape's main utilizing space have been analysed by the factor analysis algorithm, degree of visual preferences have been pleasured mainly by questionnaries and SBE method, and finally these thesis can be summarized as fallow LCP with high values of Iverson factors I and IV yield high landscape value. Specifically, Iverson factor IV has been found to play the dominant. For all experimental points, significant seasonal variations in S.D. scale values have been observed. In natural parks, where artificial structures are complementary to the natural landscape, main factors of image are S.D. scales such as the visual sequence, the formal simplicity of structures, the emphasis, the unification of heterogeneous factors and the assimilation. Factors covering the spatial image of natural parks have been found to be the overall evaluation, the individual characteristics, the tidiness, the potentiality, the dignity, the intimacy and the space volume. For all seasons, factors such as the individual characteristics, the dignity, the tidiness, the potentiality, yield high factor scores. As for factors determining the degree of visual preference, variables such as the summit, the skyline, rocks, the water and the degree of natural destruction by artificial structures yield high values for all seasons.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.708-720
• /
• 1993

The new preventive control mechanisms for traffic management in BISDN/ATM networks can be divided into Connection Admission Control(CAC), Usage Parameter Control (UPC), and Priority Control. Of these mechanism, Usage Parameter Control continuously monitors the parameters admitted in the network's entry point to guarantee quality of service of connections already admitted. Upon detecting traffic that violates the negotiated parameter, it takes the necessary control measures to prevent congestion. Among these traffic control methods, this paper focuses on the Usage Parameter Control method, and proposes and designs GRACE-LB(Guaranteed Rate Acceptance & Control Element-using Leaky Bucket) which improves upon existing UPC models. GRACE-LB modifies the previous LB model by eliminating the cell buffer, dividing the token Pool into two pools, Long-term pool, Short-term pool, and changing the long-term token generating form using 'Cycle Token' into the same bursty form as the traffic source. Through this, GRACE-LB achieves effective control of the Average Bit Rate(ABR) and burst duration of bursty multimedia traffic which previous LB models found difficult to control. Also, since GRACE-LB can e implemented using only simple operations and there are no cell buffers in it, it has the merit of being easily installed at any place.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.94-99
• /
• 1994

최근 인구의 과밀화와 이에 따른 지가의 상승 등으로 대표적인 주거용 빌딩인 아파트의 고층화가 급속하게 진행되고 있고 아파트에 설치되는 엘리베이터도 점차 대형화, 고속화 되고 있다. 실례로 15층 아파트의 경우 11인승, 60m/min의 엘리베이터가 일반적으로 사용되는 반면, 20층 아파트의 경우 17인승, 90m/min이 주로 사용된다. 이와 같이 엘리베이터의 용량과 운행 속도가 증가함에 따라 필연적으로 소음 및 진동 문제가 발생하게 된다. 특히 아파트의 경우 침실, 공부방 등 고도의 정숙을 요하는 생활 공간이 많고, 내부 공간의 활용도를 높이기 위하여 이들 방들이 엘리베이터 기계실 또는 운행 통로와 직접 접하여 있는 경우도 있어 이 경우 소음, 진동 문제는 아주 심각한 문제로 대두된다. 본 연구소가 측정한 방에 의하면 S신도시 L아파트의 경우 아파트 최상층 방에서 실내 소음도가 46dB(A), 벽의 진동가속도가 3.4mm/s$^{2}$(RMS)으로 나타났다. 진동의 경우 생활에 직접적인 악영향을 미칠 수준은 아니지만 소음의 경우 ASHRAE 권장 주택소음 기준치가 35dB(A) 이하임ㅇㄹ 감안하면 주거에 곤란한 수준이다. 수년전, 고층 아파트가 보급될 초기에는 아파트에 엘리베이터가 설치되어있다는 그 자체만으로 충분한 장점이 되어 다소음 소음, 진동문제는 큰 불만거리가 되지 않았지만 엘리베이터가 보편화된 지금에는 엘리베이터의 편리성만으로는 점점더 크게 요구되는 정숙성이 보상되지 않는다. 따라서 전반적인 아파트의 소음, 진동 문제에 큰 비중을 차지하는 엘리베이터에 의한 소음, 진동에 관하여 체계적인 연구가 필요하다. 이에 본고에서는 엘리베이터에 의한 아파트의 소음 및 진동에 관하여 그 현황, 원인 그리고 대책에 관한여 논하고자 한다.감 방법을 연구하였고, T.Sakai는 5자유도 모델을 이용하여 엔진 공회전시 발생하는 치타음에 대해 이론과 실험을 통해 해석하고, 엔진 회전수 변동, 클러치 특성, 변속기의 드래그(drag) 토크의 영향과 치타음 저감을 위한 개선된 클러치 특성을 제시하였다. 이 외에도 Thomas C.T.와 E.P.Petkus는 특정 차량에 대한 동력전달계의 비틀림 진동 현상에 대해 연구하였다. 이러한 연구들로 볼 때, 자동차 동력전달계에서 발생하는 진동은 이론과 실험을 통해 그 해석이 가능하며 설계에 매우 유용하게 이용되고 있음을 알 수 있다. 따라서, 본 연구는 4 실린더 4 싸이클 1.5 L 엔진을 장착한 경승용차의 실차 주행실험을 통해 가속 페달의 급조작에 따른 차체의 종진동 현상을 측정하고, 엔진-변속기-타이어-차체의 반환정계 4자유도 진동모델로 시뮬레이션을 수행하여 실차 주행실험의 결과치와 비교, 분석한 후 클러치 비틀림 특성을 비롯한 자동차 동력전달계의 각 설계인자들이 차체의 종진동에 어떠한 영향을 미치는가를 해석하고자 한다.be presented.LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.1

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.299-307
• /
• 2014

Nowadays, SNS media has become one of the most common and economic communication methods in the modern word. With the rapid development of communication technology, a variety of SNS media makes easier for us to reach other people everywhere and people are getting more and more reliant on them. The surge in SNS media users and SNS media diversity gets more important every day, but academic research on SNS media evaluation program is scanty. In order to present an evaluation program on the SNS media, this study selected some applicable measurement factors based on reference research, and then evaluate major SNS medias by using AHP analysis method. With these purposes, Kakaotalk, Twitter and Facebook, are the three major SNS medias that were chosen for the analysis. Through collections and analysis of usability evaluation factors about SNS quality from related literature, some factors were concluded: system quality, information quality, interface quality and service quality, to build an AHP frame. And to achieve these purposes, this study applied comprehend mutual questionnaire survey for experts and users to gather research date. Empirical studies about the results were performed using AHP method with Microsoft Office Excel 2010. In this study, the final SNS media evaluation result is that Kakaotalk ranks first of the three SNS media, Facebook is in the second place, and Twitter as least. When SNS media are evaluated, system quality, information quality, interface quality and service quality should be considered. Among all factors, service quality is the most important.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.356-362
• /
• 1991

자동차, 항공기, 선박등과 같은 산업제품과 전화기, TV브라운관과 같은 가전제품, 심미적 기능을 갖는 제품등과 같은 일상용품등은 많은 부분이 자유곡면(sculptured surface)으로 이루어져 있다. 이러한 해석적으로 정의 하기 어려운 제품 또는 그것을 생산하는데필요한 금형을 가공하는데 있어서 기존에는 석고 모형이나 목형을 이용한 모방 절삭을 하였다. 그러나 근래에는 자유곡면으로이루어진 제품을 설계하고 가공하는데 있어서 CAD/CAM system을 이용하고 있다. 제품의 곡면을 표현하거나 이들을 NC가공하기 위해서는 곡면을 나타내는 형상 정보가 필요 하고 이들 형상정보로 곡면모델링을 하여공구 경로를 구한다. 그러므로 이들 형상정보를 허용한도내에서 적절히 정하여 실제형상에 가까운 곡면을 형성하여야 한다. CAD/CAM 기술의 발달에 따라 다양한 형태의 곡면을 형성하는 기능을 가진 system이 많이 출현되었고 점토, 석고 또는 나무등으로 만든 physical model로 부터 얻어진 형상정보에 의해 surface fitting을 함으로서 자유곡면을 표현하는 방법이 많이 사용되고 있다. 어떠한 곡면을 표현할때는 곡면의 특성을 잘 표현하면서 전체적으로 smooth 한 것이 바람직하다. 그러므로 곡면의 형태를 설계자가 쉽게 이해할 수 있고 적은 수의 patch로도 복잡한 형상을 나타내야 하며 또한 국부적으로 수정이 용이하여야한다. 본 논문에서는 자유곡면을 나타낼 수 있는 수학적 표현 방법에 관하여 논하고, 해석적 곡면으로 부터 형상정보를 얻어 곡면 모델링을 한 후의 Ferguson곡면, UBS와 NUBS의 차이점을 분석하고, 이들 곡면과 해석적 곡면으로부터 얻은 실제곡면과의 오차를 측정하여 실제형상에 가까운 모델링 곡면을 찾고자 하였다.. 라. MCl(M:K$^{+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$) 수용액 메디움에서의 Cd(II), Mg(II) 및 Zn(II)의 Dowex 1-X8, Cl$^{-}$ 수지에 대한 흡착은 역시 어떤 메디움에서도 Cd(II) 흡착이 제일 크며, 다음이 Zn(II) 이고 착이온을 형성않는 Mg(II)이 제일 작았다. 한편 메디움 종류별 D값의 크기순위는 H$^{+}$>K$^{+}$> $Na^{+}$>NH$_{4}$$^{+}$이였다. 메디움의 종류에 따라 D값의 차이가 나는 것은 금속이온의 착이온 형성과 금속이온의 용액내에서의 이온종의 상태와 관련이 있다고 생각된다. 마. MCl(M:K$^{+}$, $Na^{+}$, NH$_{4}$$^{+}$ 및 H$^{+}$)과 MNO$_{3}$ 용리액에 의한 Cd(II), Mg(II) 및 Zn(II)의 용리는 예상한 바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 N