• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.4
• /
• pp.537-545
• /
• 2018

Determination of the time parameters such as the travel time in the design flood is very important. The travel time is mainly used for flood and river management, and the travel time of non flood season is used for maintenance flow and management of the river. Estimation of travel time for natural rivers is mainly based on the geomorphological factors of the basin. In addition to the topographical factors, the travel time is calculated by considering the factors of the runoff curve, velocity and rainfall intensity. However, there is no study on the estimation of travel time considering both the rainfall condition and the soil moisture accounting by the frequency period. Therefore, the travel time calculation is divided into the case of setting the Hwanggang Dam and the Imjin bridge water level station of Imjin river as the natural river considering rainfall condition by the frequency period and the soil moisture accounting, and the case of traveling the Imjin bridge water level station according to the condition of outflow of the Hwanggang Dam. For the sections set as natural rivers, the results were verified by comparing with the newly developed travel time calculation method. Based on the results, the travel times of the Hwanggang Dam outflow conditions were calculated. The time to travel in this study can be secured flood control of the Imjin river basin and time to prepare for danger when outflowing the the Hwanggang Dam.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8176-8186
• /
• 2015

This research was conducted for the purpose of developing a high-fidelity simulation education program, applying it to clinical field and analyzing this program's effect on nursing college students in order to solve problems being caused from the gap between the adult nursing theoretical class and practical education. As the analysis method, this study developed a scenario including an algorithm for caring hyperkalemia patients, the evaluation check list, and debriefing according to the adult nursing theoretical class's learning goal and measured the high-fidelity simulation program's effect in using the non-equivalent control group pre-test and post-test design. As the results from the analysis, there secured the simulation education program's general properties and dependent variable's homogeneity in the experimental group and the control group. The nursing simulation practice program for hyperkalemia patients showed slight effect on the experimental group compared to the control group in fields such as nursing practice ability, problem solving ability, critical thinking skills, self-confidence of nursing, and knowledge. (t=-83.313, p<.001, t=-3.169, p=.003, t=-2.473, p=.017, t=-4.036, p<.001, t=-5.044, p<.001). High-Fidelity simulation programs in conjunction with an adult nursing theory classes of nursing students nursing practice ability, problem solving ability, critical thinking skills, self-confidence of nursing, and knowledge. This simulation program may be an effective educational method for nursing practice and also support improved quality of nursing education.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.39-51
• /
• 2016

In accordance to rapid aging of population, the accidents of elderly pedestrian and pedestrian safety are becoming very important issues. In terms of smartphone technologies, older people are increasingly looking for useful and friendly ICT services that which can add a value on their silver life. This paper introduced a new IT-based service for elderly walking assist using a smart-phone accompanied by a wearable watch. We describe the functional requirements and a systems architecture model with an interface between a smart-phone and wearable watch. Moreover, this study attempted to verify what services are needed and to estimate elderly pedestrians' WTP (willingness to pay) for IT-based walking assistance device. A total of 189 elderly pedestrians were randomly surveyed through face-to-face interviews. The questionnaire consisted of 3 categories: (1) questions pertaining to socio-economic status, (2) 12 questions regarding walking attitudes, and (3) a question to measure WTP. With this gathered data, factor analysis and path model estimating were conducted. The results identified the elderly user requirements and the use-value of new innovative products for IT-based walking assistance services by two groups(latent elderly and elderly). The modeling result shows that elderly's service preference would increase the possibilities for the commercialization of IT-based walking device with improving their walking safety.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.283-290
• /
• 2006

The paper describes m experimental study on the shear strengthening of concrete beams with exposed wire rope. The strengthening method is using the mechanical bolting of wire rope tensioned on the exterior of beam section. There are two shear strengthening types. The first is closed type wrapped beam section with wire rope like as closed stirrup. The second is U type tensioned at the anchor located in the side of beam section. The main parameters of specimens are strengthening spacings of wire rope with 150, 200, and 250mm for the closed and U type respectively. The shear span ratio of specimens applied by 3-point loading is 4. The results showed that the ultimate shear strength and ductility of strengthened beams increased significantly compared with non-strengthened beams. Especially, the strengthening effect of closed type was very preferable to U type. Therefore, the shear strengthening method with wire rope is very reasonable in view of repair and rehabilitation of beams.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.482-487
• /
• 2005

In this paper, we propose the control method of output impedance of each cascode unit cell of distributed amplifier by connecting varactors in the gate-terminal of common gate. Compared to common source unit cell, cascode unit cell has many advantages such as high gain and high output impedance as well as negative resistance loading. But if the transistor model which is used in design is inaccurate and process parameter is changed, oscillation sometimes can occur at band edge in which the gain start to drop. Therefore, we need control circuit which can prevent oscillation, although the circuit has already fabricated, and varactor connected to gate-terminal of common gate of cascode gain cell can play that part. Measured result of fabricated distributed amplifier shows the capability of contol of gain characteristic by adjusting of value of varactors, this can guarantee the stability of the circuit. The gain is $8.92\pm0.82dB$ over 49 GHz, the group delay is $\pm9.3 psec$ over 41 GHz. All transistor which has $0.15{\mu}m$ gate length is GaAs based p-HEMT, and distributed amplifier is put together with 4 stages.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1254-1264
• /
• 2008

This paper suggests an extended memory polynomial model that improves accuracy in modeling memory effects of RF power amplifiers(PAs), and verifies effectiveness of the suggested method. The extended memory polynomial model includes cross-terms that are products of input terms that have different delay values to improve the limited accuracy of basic memory polynomial model that includes the diagonal terms of Volterra kernels. The complexity of the memoryless model, memory polynomial model, and the suggested model are compared. The extended memory polynomial model is represented with a matrix equation, and the Volterra kernels are extracted using least square method. In addition, the structure of digital predistorter and digital signal processing(DSP) algorithm based on the suggested model and indirect learning method are proposed to implement a digital predistortion linearization. To verify the suggested model, the predicted output of the model is compared with the measured output for a 10W GaN HEMT RF PA and 30 W LDMOS RF PA using 2.3 GHz WiBro input signal, and adjacent-channel power ratio(ACPR) performance with the proposed digital predistortion is measured. The proposed model increases model accuracy for the PAs, and improves the linearization performance by reducing ACPR.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.593-604
• /
• 2007

Although composite construction has more mechanical advantages compared to noncomposite construction, the design of noncomposite construction for skew bridges with large skew angels has been often checked because composite construction may cause large stresses in the bridge deck. In this study, the analytical model considered dynamic behaviors for noncomposite skew bridges was proposed. Using the proposed analytical model, the validity of the application of noncomposite construction to skew bridges was checked. Also, the effects of interactions between the concrete deck and steel girders such as composite construction, partial composite construction, and noncomposite construction on the dynamic characteristics and dynamic behaviors of simply supported skew bridges were investigated. A series of parametric studies for the total 27 skew bridges was conducted with respect to parameters such as girder spacing, skew angle, and deck aspect ratio. Although the slip at the interfaces between the concrete deck and steel girders results in the reduction of seismic total base shear in the transverse direction due to period elongation, it causes an undesirable behavior of skew bridges by the modification in mode shapes and distributions of stiffness. Shear connectors placed by minimum requirements for partial composite action have an effect on reducing the girder stresses and deck stresses; except case of some skew bridges, the magnitude of the girder stresses and deck stresses obtained from partial composite skew bridges is similar to or slightly more than those acquired from composite skew bridges.

• Korean Journal of Food Science and Technology
• /
• v.23 no.4
• /
• pp.510-516
• /
• 1991

To improve the stability of frozen yeast raised dough for doughnuts, amounts of sugar, sodium steroyl lactylate(SSL) and $KBrO_{3}$ to be added to the premix were optimized, using the fractional factorial design with 3 variables and 3 levels, by a RSM computer program. The optimum sugar, SSL and$KBrO_{3}$ levels to be added to the premix were 2%, 0.3% and 25 ppm for a desired doughnut volume, and 2%, 0.4% and 10 ppm for a desired doughnut texture, and 2%, 0.4% and 20 ppm, respectively, for an overall optimum quality of doughnuts. The frozen stored yeast raised dough prepared without floor time resulted in better doughnut volume and texture than that with floor time. The yeast raised dough prepared with the formula for overall optimum quality, was formed to ‘plain ring’ type doughnuts and stored at $-18^{\circ}C$ for 5 weeks. Volume and texture of fried doughnuts were comparable to those of control for 2 weeks of storage, and then deteriorated noticeablly from 3 weeks of storage.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.324-328
• /
• 2007

유비궈터스 헬스케어는 단일화된 서비스가 아니라 다양한 기술들이 복합적으로 결합되어 운용되는 서비스이다. 따라서 서비스의 형태가 고정적이지 않고 매우 다양하게 나타난다. 하지만 실제로 차이가 발생하는 부분은 서비스의 구현에 관한 세부적 내용에서 나타나고, 서비스 운용을 위한 기본 구성요소에 있어서는 큰 차이가 없이 유사한 형태를 가진다. 그 결과 유비쿼터스 헬스케어 서비스 개발 과정에서는 실제 서비스의 구현 외의 통신과 데이터베이스의 이용, 메시지 전달과 같은 중복되는 항목에 대한 고려가 매번 이루어져야 한다. 이것은 개발 과정에 있어 불필요한 비용의 증가를 불러온다. 본 논문에서는 이와 같은 불필요한 비용을 감소시키며 서비스의 개발과 운용이 가능한 유비쿼터스 헬스케어 서비스의 제공을 위한 아키텍처와 서비스 개발을 위한 프레임워크를 제안한다. 제안하는 서비스 제공 아키덱처는 크게 이용자 단말, 유비궈터스 헬스케어 서비스 센터, 외부 기관으로 구성된다. 서비스 개발 프레임워크는 서버와 클라이언트 프레임워크로 구분된다. 서비스 개발 프레임워크는 서비스를 제공하는 서버에서 필요한 유비쿼터스 헬스케어 서비스의 공통 구성요소를 가진다. 서비스의 개발을 위해 우선 프로세스에 대한 정의를 수행하고, 정의된 내용에 따라 필요한 코드 템플릿을 결합하여 서비스의 초기 형태를 만들어낸다. 여기에 각 서비스가 필요로 하는 세부 사항을 작성하는 것으로 서비스의 개발을 수행하게 된다. 제안된 서비스 제공 아키텍처와 서비스 개발 프레임워크를 실제 적용해보기 위해 전림선비대증 환자 진료를 위한 시스템을 설계하고 구현하였다.JSHOP2 계획수립기내에 구현하였다. 계획 실행 방법으로는 주어진 강건한 계획에 대하여 행위들이 직접 실행하수 있도록 한다.며 용량에 의존하는 양상을 보였다. $H_2O_2$에 의해 유발(誘發)된 DNA의 손상은 catalase와 deferoxamine에 의해 억제되었지만 DPPD는 억제시키지 못했다. 배기음(排氣飮)은 $H_2O_2$에 의해 유발(誘發)된 ATP의 소실을 회복시켰다. 이러한 실험결과 $H_2O_2$에 의해 유발(誘發)된 세포(細胞)의 손상(損傷)은 지질(脂質)의 과산화(過酸化)와는 다른 독립적인 기전에 의해 일어남을 나타낸다. 결론 : 이러한 결과들로 볼 때 Caco-2 세포(細胞)에서 배기음(排氣飮)이 항산화작용(亢酸化作用)보다는 다른 기전을 통하여 Caco-2 세포안에서 산화제(酸化劑)에 의해 유발(誘發)된 세포(細胞)의 사망(死亡)와 DNA의 손상(損傷)을 방지할 수 있다는 것을 가리킨다. 따라서 본 연구(硏究)는 배기음(排氣飮)이 반응성산소기(反應性酸素基)에 의해 매개된 인체(人體) 위장관질환(胃腸管疾患)의 치료(治療)에 사용할 수 있을 가능성(可能性)이 있음을 제시하고 있다.에 이를 이용하여 유가배양시 기질을 공급하는 공정변수로 사용하였다 [8]. 생물학적인 폐수처리장치인 활성 슬러지법에서 미생물의 활성을 측정하는 방법은 아직 그다지 개발되어있지 않다. 본 연구에서는 슬러지의 주 구성원이 미생물인 점에 착안하여 침전시 슬러지층과 상등액의 온도차를 측정하여 대사열량의 발생량을 측정하고 슬러지의 활성을 측정할 수 있는 방법을

• Korean journal of communication and information
• /
• v.68
• /
• pp.7-33
• /
• 2014

Using data from an online survey in Korea, this study examines factors affecting college students' intention to use wearable device based on an extended Unified Theory of Acceptance and Use Technology (UTAUT) (UTAUT2 Model). The results of the regression analysis suggest that performance expectancy, social influence, and facilitating conditions from original UTAUT are statistically significant variables to explain college students' intention to use wearable device. Also, the results of the data analysis reveal that added factors from UTAUT2 like hedonic motivation and price value are influential factors to explain intention to use wearable device. In addition, this study suggests that future studies need to test the UTAUT2 model in the context of new information and communication technologies.