• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.15-21
• /
• 2005

This Study was conducted to investigate the effects of microbial phytase in low phosphirus and calcium level diet on the performance and nutrient digestibility in laying hens. One hundred ninety two, 50 wks old, ISA brown commerical layers were used for 12 weeks feeding trial after 7-d adjustment period. Four dietary treatments included CON(control; Co.), P2 ($0.06\%$ Natuphos, BASF) and P3 ($0.06\%$ PHOSMAX, GENOFOCUS). Ca and available P concentrations of P1, P2 and P3 were 90 and $50\%$ of NRC recommecdations to accentuate difference in response to phytase availability. In whole period, egg production was not affected by treatments. At 12 weeks, egg weight was significantly increased in adding phytase treatments (P<0.05). Egg shell thickness was increased in P1, P2 and P3 treatments compared with control (P<0.05) at 9 weeks. Ca concentration of serum tended to decrease in P1 treatment without significant difference (P>0.05). Ca and P concentrations of tibia were higher in layers fed dietary phyrase than those fed control diet without significant difference (P>0.05). Digestibilities of DM, N and ash were improved in P1 treatment compared with P2 and P3 treatments (P<0.05). Ca and P digestibilities were the highest in P2 treatment (P>0.05), but was not significant difference between control and P1 treatments.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.50-58
• /
• 2005

Recently, the imaging of geological structures beneath water-covered areas has been in great demand because of numerous tunnel and bridge construction projects on river or lake sites. An electrical resistivity survey can be effective in such a situation because it provides a subsurface image of faults or weak zones beneath the water layer. Even though conventional resistivity surveys in water-covered areas, in which electrodes are installed on the water bottom, do give high-resolution subsurface images, much time and effort is required to install electrodes. Therefore, an easier and more convenient method is sought to find the strike direction of the main zones of weakness, especially for reconnaissance surveys. In this paper, we investigate the applicability of the streamer resistivity survey method, which uses electrodes in a streamer cable towed by ship or boat, for delineating a fault zone. We do this through numerical experiments with models of water-covered areas. We demonstrate that the fault zone can be imaged, not only by installing electrodes on the water bottom, but also by using floating electrodes, when the depth of water is less than twice the electrode spacing. In addition, we compare the signal-to-noise ratio and resolving power of four kinds of electrode arrays that can be adapted to the streamer resistivity method. Following this numerical study, we carried out both conventional and streamer resistivity surveys for the planned tunnel construction site located at the Han River in Seoul, Korea. To obtain high-resolution resistivity images we used the conventional method, and installed electrodes on the water bottom along the planned route of the tunnel beneath the river. Applying a two-dimensional inversion scheme to the measured data, we found three distinctive low-resistivity anomalies, which we interpreted as associated with fault zones. To determine the strike direction of these three fault zones, we used the quick and convenient streamer resistivity.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Clean Technology
• /
• v.28 no.3
• /
• pp.218-226
• /
• 2022

As a result of the recent social transformation towards a hydrogen economy and carbon-neutrality, the demands for hydrogen energy have been increasing rapidly worldwide. As such, eco-friendly hydrogen production technologies that do not produce carbon dioxide (CO₂) emissions are being focused on. Among them, ammonia (NH₃) is an economical hydrogen carrier that can easily produce hydrogen (H₂). In this study, Ru/Al₂O₃ catalyst coated onmetallic monolith for hydrogen production from ammonia was prepared by a dip-coating method using a catalyst slurry mixture composed of Ru/Al₂O₃ catalyst, inorganic binder (alumina sol) and organic binder (methyl cellulose). At the optimized 1:1:0.1 weight ratio of catalyst/inorganic binder/organic binder, the amount of catalyst coated on the metallic monolith after one cycle coating was about 61.6 g L^-1. The uniform thickness (about 42 ㎛) and crystal structure of the catalyst coated on the metallic monolith surface were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Also, a numerical optimization regression equation for NH3 conversion according to the independent variables of reaction temperature (400-600 ℃) and gas hourly space velocity (1,000-5,000 h^-1) was calculated by response surface methodology (RSM). This model indicated a determination coefficient (R²) of 0.991 and had statistically significant predictors. This regression model could contribute to the commercial process design of hydrogen production by ammonia decomposition.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.41-50
• /
• 2010

We have developed an in-situ benthic chamber (BelcI) for use in coastal studies that can be deployed from a small boat. It is expected that BelcI will be useful in studying the benthic boundary layer because of its flexibility. BelcI is divided into three main areas: 1) frame and body chamber, 2) water sampler, and 3) stirring devices, electric controller, and data acquisition technology. To maximize in-situ use, the frame is constructed from two layers that consist of square cells. All electronic parts (motor controller, pA meter, data acquisition, etc.) are low-power consumers so that the external power supply can be safely removed from the system. The hydrodynamics of BelcI, measured by PIV (particle image velocimetry), show a typical "radial-flow impeller" pattern. Mixing time of water in the chamber is about 30 s, and shear velocity ($u^*$) near the bottom layer was calculated at $0.32\;cm\;s^{-1}$. Measurements of diffusivity boundary layer thickness showed a range of $180-230\;{\mu}m$. Sediment oxygen consumption rate, measured in-situ，was $84\;mmol\;O_2\;m^{-2}\;d_{-1}$, more than two times higher than on-board incubation results. Benthic fluxes assessed from in-situ incubation were estimated as follows: nitrate + nitrite = $0.18\;{\pm}\;0.07\;mmol\;m^{-2}\;d^{-1}$ ammonium $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$ phosphate = $0.09\;{\pm}\;0.02\;mmol\;m^{-2}\;d^{-1}$ and silicate = $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$.

• Korean Journal of Poultry Science
• /
• v.37 no.2
• /
• pp.117-123
• /
• 2010

This work was carried out to investigate the effect of the induced molting with low-protein and energy diet on the postmolt performance of layers. Eighty White Leghorn layers (61-old-wk) with over 80% egg production were used for 12 weeks in this work. Treatments were non-molt control (CO), fasting treatment for 10 days (FW), molt treatment with low-protein and low-energy molting diet for 3 weeks (LO), and molt treatment with standard molting diet for 3 weeks (ST) as 4 treatments (2 replications/treatment and 10 birds/replication). Body weight (BW) loss was 26.5% of initial BW at 2 week in FW treatment, and was 17.3% and 14.2% in both LO and ST treatments (P<0.05). Layers in molting treatments were fed with commercial layer diet after completion of molting since BW of layers was recovered for 7 weeks. Heart weight ratio was shown as 0.47, 0.43, 0.46 and 0.46% at CO, FW, LO and ST treatments, respectively, and liver weight ration of body weight was shown as 2.56, 1.30, 1.47 and 1.52%, respectively. Thus, those of molting treatments decreased compared to non-molt control (P<0.05). Oviduct weight ratio were shown as 3.95, 1.17, 1.54 and 1.67%, respectively, and similar with the results of liver (P<0.05). Feed intake decreased at LO and ST treatments during molting period and increased from the 5th week compared to control. Egg production decreased at 1 week in molt treatment and stopped at 2 week in FW, 3 week in LO, and 4 week in ST treatments. The birds started to lay egg at 4 week in FW and at 5 week in LO and ST treatments. Egg production was recovered until 50% at 6 week in FW and was recovered as 66.1 and 71.6% at 8 week in LO and ST treatment, respectively. Egg weights were similar among all treatments. Eggshell thicknesses were 0.41, 0.47, 0.46 and 0.46 mm at CO, FW, LO and ST treatment, respectively, but the higher in molt treatments than control (P<0.05). Eggshell breaking strength was 3.83 and 3.81 kg/$cm^2$ in FW and LO treatment, respectively, and high compared to control. However, eggshell breaking strengths were 3.54 and 3.78 kg/$cm^2$ and were not statistically different. Haugh units were 75.6, 81.1, 80.6 and 79.9 in 4 treatments and high in molt treatment. Finally, dietary low-protein and low-energy may induce molt as few effect on performance of layers.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.235-243
• /
• 2007

This study was conducted to evaluate the effects of feeding rye silage on growth performance, blood and carcass characteristics in finishing pigs. The total of eighteen($Landrace{\times}Yorkshire{\times}Duroc$) pigs($74.22{\pm}0.71kg$) were used for 49-day assay. Dietary treatments included 1) CON(basal diet), 2) S1(1.66% rye silage) and 3) S2(3.32% rye silage). In growth performance, from 4 to 7 weeks, average daily feed intake(ADFI) in pigs fed CON diet was higher than pigs fed S1 and S2 diets. Through the entire experimental period($0{\sim}7$ weeks), a ADFI in CON and S2 treatments was higher than S1 treatment (p<0.05). Serum cortisol concentration of pigs fed rye silage decreased significantly compared to pigs fed basal diet (p<0.05). The Hunter's $L^*$(lightness) value of loin in the pigs fed S2 diet was higher than that of loin in the pigs fed CON diet(p<0.05). The $b^*$(yellowness) value of loin in the pigs fed S1 and S2 diets were higher than CON treatment(p<0.05). Backfat thickness in CON treatment increased significantly compared to S1 and S2 treatments(p<0.05). Among fatty acid contents of lean meat, the contents of palmitic and stearic acids were significantly higher in CON than others(p<0.05), where as eicosenoic and linolenic acids were the highest in S2 treatment among treatments(p<0.05). Total SFA(saturated fatty acid) was the highest in CON(p<0.05) and S1 and S2 treatments were higher USFA/SFA(unsaturated fatty acid/saturated fatty acid) ratio than CON treatment. In fats, linolenic acid was higher in S2 treatment than those of S1 and CON treatments(p<0.05). Digestibility of dry matter in pigs fed S1 and S2 diets was greater than that of pigs fed CON diet(p<0.05) and S1 treatment was higher than others on digestibility of nitrogen(p<0.05). VFA(volatile fatty acid) emission from focal, measured after 1 day, increased significantly in pigs fed S1 and S2 diets(p<0.05). In conclusions, our results showed that feeding rye silage might be beneficial in decrease of cortisol concentration, hunter's $L^*$(lightness) value and $b^*$(yellowness), fatty acid contents, and nutrient digestibility. However, there should be more study on the relationship between feeding rye silagr and finishing pigs.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.53-65
• /
• 2001

Purpose : To improve the local control of patients with nasopharyngeal cancer, we have implemented 3-D conformal radiotherapy and forward intensity modulated radiation therapy (IMRT) to used of compensating filters. Three dimension conformal radiotherapy with intensity modulation is a new modality for cancer treatments. We designed 3-D treatment planning with 3-D RTP (radiation treatment planning system) and evaluation dose distribution with tumor control probability (TCP) and normal tissue complication probability (NTCP). Material and Methods : We have developed a treatment plan consisting four intensity modulated photon fields that are delivered through the compensating tilters and block transmission for critical organs. We get a full size CT imaging including head and neck as 3 mm slices, and delineating PTV (planning target volume) and surrounding critical organs, and reconstructed 3D imaging on the computer windows. In the planning stage, the planner specifies the number of beams and their directions including non-coplanar, and the prescribed doses for the target volume and the permissible dose of normal organs and the overlap regions. We designed compensating filter according to tissue deficit and PTV volume shape also dose weighting for each field to obtain adequate dose distribution, and shielding blocks weighting for transmission. Therapeutic gains were evaluated by numerical equation of tumor control probability and normal tissue complication probability. The TCP and NTCP by DVH (dose volume histogram) were compared with the 3-D conformal radiotherapy and forward intensity modulated conformal radiotherapy by compensator and blocks weighting. Optimization for the weight distribution was peformed iteration with initial guess weight or the even weight distribution. The TCP and NTCP by DVH were compared with the 3-D conformal radiotherapy and intensitiy modulated conformal radiotherapy by compensator and blocks weighting. Results : Using a four field IMRT plan, we have customized dose distribution to conform and deliver sufficient dose to the PTV. In addition, in the overlap regions between the PTV and the normal organs (spinal cord, salivary grand, pituitary, optic nerves), the dose is kept within the tolerance of the respective organs. We evaluated to obtain sufficient TCP value and acceptable NTCP using compensating filters. Quality assurance checks show acceptable agreement between the planned and the implemented MLC(multi-leaf collimator). Conclusion : IMRT provides a powerful and efficient solution for complex planning problems where the surrounding normal tissues place severe constraints on the prescription dose. The intensity modulated fields can be efficaciously and accurately delivered using compensating filters.