• The Journal of the Petrological Society of Korea
• /
• v.19 no.1
• /
• pp.51-65
• /
• 2010

The Dongmakgol Tuff is a stratigraphic unit which is composed of voluminous ignimbrites in the Cheolwon basin. The ignimbrites belong to pumice-rich vitric tuffs that show eutaxitic to parataxitic fabrics from fiamme or pumice clasts. They are almost densely welded and strongly flattened, but often parallel aligned and stretched. Also they exhibit flow indicators such as flow lineations, imbrications, tensional cracks and boudins from their alignment and/or elongation, and lithic and pumice clasts show lateral grading in their average maximum diameter. Flow direction map from the lineations, asymmetric structures and lateral grading diagram indicate that the Dongmakgol Tuff has a source from its southwestern part near a boundary between southern Dongmakri and northern Gomunri, and is considered that the ignimbrites took emplacement processes of laminar flows during the final stage of flowage and the flow lineations are from the result of shear stress during that times.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.147-148
• /
• 2013

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.1
• /
• pp.51-61
• /
• 2012

In this research, we have analyzed the trend of radiation pattern variation in relation to the change of design variables such as source interval and source number for conformal array transducers arranged in equi-angle, equi-interval, and geodesic dome forms. Through statistical multiple regression analysis of the results, we derived functional forms of the side lobe level and the beamwidth in terms of the design variables. Futhermore, the structure of the array transducer was optimized to achieve the smallest side lobe level while satisfying the requirements on beam width by the GA (genetic algorithm) method. Based on the optimized results, we have determined the equi-interval form as the optimal array geometry among the three conformal array geometries.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.10
• /
• pp.1077-1086
• /
• 2014

We propose a design method of a Rotman lens for curved array antenna applicable to conformal array. In this paper, design equations are derived to obtain an array curve, transmission line lengths of a Rotman lens in conjunction with a curved array antenna, and the phase error of a Rotman lens based on these design equations is minimized through the beam curve optimization procedure and the refocusing procedure. Rotman lenses designed by the proposed design equations and design procedures still maintain 3 focal points, can feed a convex or concave array antenna with circular curve, parabolic curve, V-shaped curve, etc as well as a straight line array antenna, and have minimal phase error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1739-1747
• /
• 1994

This study is concerned with a feeding method of microstrip patch antennas with different widths as feeding elements in order to obtain the appropriate radiation patterns of nonuniform array antennas. We analyze a microstrip patch antenna based on the transmission line model and derive that the ratio of current is equal to that of the input impedances of array antenna elements in case that the feed-line length between elements of array antenna is equal to the integer times of $\lambda_g$. We measure the radiation patterns of the nonuniform microstrip patch array antenna with 6 and 9 elements. The patterns measured are well agreed with the theoritically calculated patterns. Thus, this result can be utilized in the implementation of a feed network in nonuniform array antennas.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.63-64
• /
• 2015

In this paper, a microstrip array antenna capacitively coupled to a microstrip line is studied. The array antenna consists of uniformly spaced rectangular microstrip patches arranged close to a feeding microstrip line on a grounded dielectric substrate. The effects of various parameters, such as strip width and length, distance between adjacent patches, gap between strip patches and microstrip feed line, on the antenna performance were examined. By properly adjusting geometrical parameters, the array suitable for a high gain antenna for use in a frequency band centered at 12.5 GHz was designed.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2019

In this paper, we have studied a direction finding method of the radio signal by comparing the phase difference and its pattern from the uniform circular array antenna. In the phase comparison direction finding, if the length of the antenna baseline is longer than 0.5 wavelength of the incident signal, azimuth ambiguity occurs in which two or more azimuth angles are calculated in the same phase difference. The azimuthal ambiguity is removed by fusing the phase difference of the 5 antennas. The developed ambiguity elimination technology reduces the azimuth error where the antenna baseline is shorter than 1.236 wavelength in the uniform circular array with five antennas. This algorithm is very useful for the design of direction finder of an electronic information system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.521-527
• /
• 2002

In this paper, we introduce a procedure to find design parameter for array coupled lines using 2-D finite element analysis. To extract design parameters using FE calculation, we set up several design conditions. In order to show the validity of our approach, we designed, simulated and fabricated a comb-line bandpass filter.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.483-484
• /
• 2007

신설 선로와 기존 선로와의 계통 연계시 상 배치에 따라 연계 후 정상상태에서 과다한 영상전류의 발생으로 인하여 지락계전기의 동작 같은 계통에 악 영향을 미치는 현상이 일어난다. 이 논문은 새로운 계통연계 시 송전선로의 기설된 철탑을 이용한 역상배치 시행여부에 따른 실 계통을 해석하고 계통의 상시 불평형률을 간의 선로 신설 공사와 관련하여 분석하여, 이상적인 송전선로 상 배열을 제시한다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.2
• /
• pp.162-166
• /
• 2007

In this paper, we propose a WDM optical true time-delay (OTTD) beam former for phased way antenna (PAA) systems. It is composed of a delay lines matrix and a multiwavelength source with discrete DFB laser diodes. The building block of a delay lines matrix is a $2\times2$ optical MEMS switch with proper fiber-optic delay line connected between cross ports. A $4\times3$ matrix using four DFB lasers has been fabricated with unit time-delay difference of 12 ps. Maximum time-delay error was measured to be -1.74 ps and +1.14 ps at a radiation angle of $46.05^{\circ}$, corresponding to error range of $-2.87^{\circ}\sim+1.88^{\circ}$. By measuring time-delays at six different RF frequencies from 5- to 10-GHz, we verified the true time-delay characteristic of our OTTD.