• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2003

A novel Solid Freeform Fabrication System, which makes prototype by cutting tapes at the boundary of object and accumulating the tapes, has been developed. In order to overcome the staircase shape at the surface of prototype, the laser beam is irradiated tangent to the surface. Five axis cutting system and the tangent cutting trajectory generation algorithm have been developed.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.4
• /
• pp.311-321
• /
• 2017

This paper deals with the flexural performance of a composite girder system designed to readily form a composite section without a formwork and to easily realize multistage preflexing and prestressing. After a 3-Dimensional finite element modeling for construction stage analysis, the parametric numerical analysis was performed to analyse the stress distribution on the composite girder sections and the prestressing effects along with concrete pouring method and strand tensioning method. Based on the stress distribution analysis, a favorable construction stage model has been rationally chosen and then the ultimate flexural strengths were evaluated to conduct a comparative study, which exceed the nominal flexural strength suggested by the current design specification(ASD). It can be concluded that the proposed composite girder and fabrication procedure should have a sufficient structural performance.

• Journal of Korea Water Resources Association
• /
• v.44 no.12
• /
• pp.975-990
• /
• 2011

In this study, to develop an assessment method for spatio-temporal riverbed changes, a 1-dimensional model (HEC-RAS) and a 2-dimensional model (CCHE2D) were built and applied. As for the analysis of a riverbed's long-term change in a real stream, three new assessment methods were developed, which are called the "Sediment section cumulative curve", "Sediment section moment", and "Sediment probability distribution function." These methods were used to assess the characteristics of riverbed changes using a consistent valuation standard and to understand changes in quantities intuitively. From the results of this study, sediment characteristics of cross sections can be detected effectively by applying the "Sediment section cumulative curve" method to determine whether there is any sedimentation or erosion in total emission. The amount of sedimentation or erosion occurring in the right or left banks, which divided by center column, could be presented as one criterion by applying the "Sediment section moment" method. This approach could be utilized as an indicator for sediment predictions. Spatio-temporal sediment variables can be presented quantitatively by determining the mean and uncertain boundaries through the "Sediment probability distribution function", and finally, the results can be illustrated for each cross section to provide intuitive recognition.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2023

At construction sites, interest in the production of precast materials is increasing due to off-site conditions due to changes in construction site conditions due to increased labor costs and the Act on the Punishment of Serious Accidents. In particular, the precast prestressed hollow slab has a hollow shape in the cross section, so structural performance is secured by reducing weight and controlling deflection through stranded wires. With the application of structural standards, the urgency of securing fire resistance performance is emerging. In this study, a fire-resistance cross section was developed by reducing the concrete filling rate in the cross section and improving the upper and lower flange shapes by optimizing the hollow shape in the cross section of the slab to have the same or better structural performance and economic efficiency compared to the existing hollow slab. The PC hollow slab to which this was applied was subjected to a two-hour fire resistance test using the cross-sectional thickness as a variable, and as a result of the test, fire resistance performance (load bearing capacity, heat shielding property, flame retardance property) was secured. Based on the experimental results, it is determined that fire resistance modeling can be established through numerical analysis simulation, and prediction of fire resistance analysis is possible according to the change of the cross-sectional shape in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.4
• /
• pp.258-267
• /
• 2004

Coastal and harbor structures, which are constructed for the beach protection and coastal zone development, often cause the severe beach erosion problem resulted from changes of longshore sediment transport. In this study, we present a new methodology to estimate the longshore sediment transport rates using the measured data of beach profiles or shorelines. The methods is applied for the prediction of longshore sediment transport rates along Kailua beach, Hawaii and shorelines in the vicinity of Anmok Harbor, Korea.

• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.260-262
• /
• 2002

제품의 소재를 미리 테입 형태로 만들어 단면의 경계면을 따라 레이저로 절단하여 적층하는 방식은 제품의 표면에 계단 모양의 무늬가 생기므로 정밀한 제품을 제작하는데 어려움이 있었다. 이를 극복하기 위하여 단면의 경계선을 절단할 때 수직으로 절단하는 것이 아니라 경사면을 따라 절단하여 전체적인 제품의 옆면이 부드럽게 연결되는 경사절단형 임의형상가공시스템을 개발하였다. 이를 위하여 레이저 5축 경사절단기를 개발하였는데, x축과 y축은 상용화되어 있는 x-y table을 이용하였고 z축은 한 개의 z축 이송대를 이용하였다. 롤과 피치를 위하여는 서보모터 두 개를 이용하여 작업대가 회전할 수 있도록 하였다. 이와 같은 레이저 5축 경사절단기를 개발함으로써 시편의 어느 위치에서든 어느 각도로도 절단이 가능하게 할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.167-177
• /
• 1996

The cutoff frequencies of a double ridged rectangular waveguide are calculated by applying the modal analysis to its cross-section. And the characteristic impedance of its $TE_{10}$ mode is evaluated in a frequency range of 6 to 18 GHz. When both ends of a linearly tapered rectangular wa- veguide consists of single and double ridged rectangular cross-sections, the equivalent nonuniform transmission line of its $TE_{10}$ mode is solved numerically. It is shown that the input impedance at its single ridged terminal becomes nearly constant in the wide bandwidth.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.12
• /
• pp.165-172
• /
• 1995

Many algorithms to enhance a speed performance of a robot have been studied, but it's rare to consider disign aspect of a robot arm for time optimal problem. In this paper, section demensions of a robot arm and a velocity profile of an end-effector were optimally designed to minimize the cycle time. Capacity of actuators, deflections of end-effector, and a fundamental natural frequency of the robot arm were constrained in optimal design. For a given path with a trapezoidal velocity profile, torques of each joint were calculated using the inverse kinematics and dynamics. For the SCARA type robot which is mainly used for assembly tasks, the time optimal design of each robot arm id presented with the above constraints.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.517-519
• /
• 2000

본 논문은 뇌의 수직단면에 대하여 촬영된 자기공명영상에서 뇌 영역을 분리한 후 백질과 회백질 및 뇌척수액을 분리하고 각각의 체적을 산출하기 위한 것이다. 본 연구는 먼저 뇌의 자기공명영상에서 영상의 배경 및 뇌 내부를 둘러싸고 있는 외피 및 지방층으로부터 뇌 영역 전체를 분리하였으며, 부분체적의 문제(partial volume artifact)에 의해 명암값의 번짐 현상을 보이는 뇌의내부 영역에서 각 성분의 부분체적을 산출하여 각 조직을 분리하기 위한 명암 값을 결정한 후 백질과 회백질 및 뇌척수액의 영역을 분리하였다. 본 연구는 뇌의 위축을 보이지 않은 정상인의 자기공명영상을 대상으로 하였으며, 향후, 이러한 연구 결과는 알쯔하이머 병이나 뇌성마비 등과 같은 퇴행성 뇌질환 환자의 뇌 위축정도를 객관적으로 진단하는 방법으로 사용될 수 있도록 하는데 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.120-120
• /
• 2012

차세대 가속기용 언듈레이터 진공용기는 In-vacuum 또는 out-vacuum 형태로 제작되며 out-vacuum 언듈레이터 진공용기는 얇고 길이가 긴 모양을 가진다. 이 진공용기는 완전한 비자성체가 요구되므로 주로 알루미늄 합금재로 제작된다. 또한 언듈레이터의 자석 간극은 그 중심에서 자기장의 세기가 극대화 되도록 최대한 근접하게 제작하기 때문에 진공용기의 단면도 이에 따라 매우 작고 또 진공용기의 두께도 매우 얇아야 만 한다. 현재 설계하고 있는 PAL-xFEL x-선 언듈레이터 용 진공용기는 내부 단면의 최대 크기가 5.2 mm, 두께는 $0.5mm{\pm}0.05mm$ 이고 길이 6,000 mm에서 그 평탄도가 0.1 mm 이하가 되어야 한다. 이 같은 진공용기를 제작하기 위하여서는 초정밀 압출, 후 평탄화 공정, 내표면 경면 처리, 초정밀 기계가공, 진공용접이 핵심공정이다. 본 논문에서는 알루미늄 6063-T5을 재료로 이 같은 초정밀 진공용기를 제작하는 전체 공정에 대한 국외 기술 동향과 국내 적용 가능한 공정을 조사하여 보고하고자 한다.