• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.138-144
• /
• 2013

New experimental devices and methods to measure shaft forces of ships are proposed in this paper. The strain gauge type six-component load cell was newly designed and installed to the end of the propeller shaft. The signals generated from the sensor in the propeller rotating are transferred to the new data amplifying and processing board on the shaft and the data is transmitted to the self-made wireless receiver. To find out the characteristics of shaft forces during port and starboard turning motions in sea trial, oblique and combined yaw maneuvering tests at straight, transient, maximum yaw rate, steady conditions were performed with the model ship installed the shaft forces measuring device using circular motion tester of Samsung Ship Model Basin. Characteristics of the measured shaft forces in model tests show quantitatively good agreement with the computed values obtained by the CFD programs using the measured wake data in oblique towing conditions. In the near future, It is hoped that the estimated shaft forces for a ship from this experimental method could be validated through comparison with directly measured values of a ship.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1317-1323
• /
• 2010

In this study, the weld residual stress distribution at a dissimilar-metal welded plate of low alloy carbon steel and stainless steel, which are widely used in nuclear power plants, was characterized. A plate mock-up with butt welding was fabricated using SA 508 low alloy steel and Type 304 stainless steel plates and the residual stresses were measured by the X-ray diffraction method after electrolytic polishing of the plate specimen. Finite element analysis was carried out in order to simulate the butt welding of dissimilar metal plate, and the calculated weld residual stress distribution was compared with that obtained from the measured data. The characteristics of the three-dimensional residual stress distribution in a butt weld of dissimilar metal plates were investigated by comparing the measured and calculated residual stress data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.1-7
• /
• 2016

A range of techniques have been being developed to remove the volatile organic compounds from paining processes. High temperature decomposition of harmful VOCs using arc plasma has recently been proposed, and this work analyzed the extreme hot process by computer-aided fluid dynamics prior to the reactor design. Numerical simulations utilized the conservation equations of mass and momentum. The simulation showed that the fluid flowed down along the inner surface of the centrifugal reactor by forming intensive spiral trajectories. Although the high temperature gas generated by plasma influences the bottom of the reactor, no heat transfer in radial direction appeared. The decomposition efficiency of a typical VOCs, toluene, was found to be a maximum of 67% across the reactor, which was similar to the value (approximately 70%) for the lab-scale test.

• Journal of Aquaculture
• /
• v.10 no.1
• /
• pp.9-15
• /
• 1997

The pathogenic organisms occurred in cultured marine fishes in Kamak Bay were investigated from March to November in 1993. The samples were collected at 7 sampling stations once a month. Nine species of pathogenic organisms (Vibrio sp., Edwardsiella sp., Flexibacter sp., Streptococcus sp., Micrococcus sp., Caligus sp., Trichodina sp., Lymphocystis and Staphylococcus sp.) were identified as pathogenic organisms from four different species of fish (Sebastes schlegeli, Paralichthys olivaceus, lateolabrax japonicus and Pagrus major) collected in the study areas. Most of pathogenic organisms were found at over 20^{\circ}C$ of sea water temperature from June to October in 1993. On the test of drug sensitivity, Vibrio sp. (KS-9303) was sensitive to oxytetracycline and chloramphenicol ; Edwardsiella sp. (KP-9315) to oxytetracycline ; Flexibacter sp. (KP-9318) to oxytetracycline, chloramphenicol and oxolinic acid ; Streptococcus sp. (KP-9319) to erythromycin, chlorampheicol and oxytetracycline. However, all these 4 isolated bacteria were resistant to ampicilin, steptomycin, sulfamethoxazole and nitrofurazone.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.65-79
• /
• 1994

In the present paper, An emphasis is laid upon effects of stern bulb on hydrodynamic property and manoeuvring performance. We carried out captive model tests in circulating water channel with two ship models of which the frame lines of aft bodies are different. such as normal stern form and stern form with bulb, but of which the other parts are exactly same. The tests conducted consist of hull resistance test, effective thrust measurement, oblique tow test, and measurements of factors related to rudder force. From the results of model tests, we discussed effects of stern bulb on hull forces and on hull-propeller-rudder interactions, comparing with normal stern form. Furthermore, we also discussed effects of stern bulb on course stability. turning ability. spiral characteristics and zig-zag manoeuvre by computer simulation. As a result, it is clarified that the adoption of stern bulb makes course stability the worse and turning ability the better. The difference of the hydrodynamic derivatives of naked hull between two ship forms cause the worse course stability of the ship with stern bulb. The differences of the effective inflow velocity to rudder and hull forces induced by steered rudder cause the better turning ability of the ship with stern bulb.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.386-393
• /
• 2023

Recently, the demand for autonomous navigation technology has increased, and related research is also increasing. Autonomous ships generally follow the planned route, calculate the avoidance route according to the risk situation while sailing, and follow a calculated route. In general, an automatic steering device is used to follow the route, and among the operational automatic steering device methods, the route control mode is the most appropriate method to apply to autonomous ships. Therefore, in this study, we developed a route-tracking algorithm to apply an avoidance route using the navigation control mode of an automatic steering device. The algorithm was developed by dividing the straight and turning sections. A performance test was conducted to satisfy the performance suggested by IEC 62065, the relevant international standard, using simulator equipment that had acquired international certification to verify its performance. The results of the performance verification confirmed that the cross-track error, which represents the straight distance between the ship and the route, satisfied the performance standards suggested by IEC 62065 when the ship followed the route.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.687-693
• /
• 2016

The rapid turning and acceleration movement of a rotorcraft leads to a sloshing phenomenon in the fuel tank. Sloshing caused by rapid movement can affect the internal components by creating an excessive load. In severe situations, the resulting damage to the internal components and pipes can also lead to the tearing of the fuel tank itself. Therefore, to improve the survivability of the crew, the internal components of the fuel tank must be designed to retain their structural soundness during the sloshing phenomenon. In order to accomplish this, the sloshing load acting on the components first needs to be determined. This paper investigates the sloshing load applied to the internal components by performing numerical analysis for rotary-wing aircraft fuel tanks in the sloshing test. Fluid-Structural Interaction (FSI) analysis based on smoothed particle hydrodynamics (SPH) is conducted and the conditions specified in the US military standard (MIL-DTL-27422D) are employed for the numerical simulation. Based on this numerical simulation, by analyzing the load applied to the internal components of the fuel tank due to the sloshing phenomenon, the possibility of obtaining the design data by numerical analysis is examined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.425-433
• /
• 2006

The presented work provided a predictive equation for dynamic modulus of hot mix asphalt, which showed higher reliability and more simplicity. Lots of test result by UTM at laboratory has been used to develop the precise predictive equation. Evaluation of dynamic modulus for 13mm and 19mm surface course and 25mm of base course of hot mix asphalt with granite aggregate and two asphalt binders (AP-3 and AP-5) were carried out. Superpave Level 1 Mix Design with gyrator compactor was adopted to determine the optimum asphalt binder content (OAC) and the measured ranges of OAC were between 5.1% and 5.4% for surface HMA, and around 4.2% for base HMA. The dynamic modulus and phase angle were determined by testing on UTM, with 5 different testing temperature (-10, 5, 20, 40, & $55^{\circ}C$) and 5 different loading frequencies (0.05, 0.1, 1, 10, 25 Hz). Using the measured dynamic modulus and phase angle, the input parameters of Sigmoidal function equation to represent the master curve were determined and these will be adopted in FEM analysis for asphalt pavements. The effect of each parameter for equation has been compared. Due to the limitation of laboratory tests, the reliability of predictive equation for dynamic modulus is around 80%.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.299-311
• /
• 1994

The new course distances of a ship are one of the important factors of the safety handling as the indices to indicate directly her abilities of course alteration. Recently, International Maritime Organization (IMO) exhorts that all vessels should use maneuvering booklets in which are drawn the curves of new course distances obtained from the test of measuring them and noted other maneuvering performance standard in various navigation conditions. This paper describes the method to calculate many new course distances for many rudder angles by turning circle test without observation or using other calculating methods. The main results are as follows: 1) The mean difference of the distances between two new course distances by the turning circle test and heading test of the experimental ship was about 7.7% vaules of the ones by the heading test. when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$ . These new course distances were therefore found to be small in difference of those. 2) The mean difference of the distance between two new course distances by the turning circle test and the maneuvering indices of the experimental ship was about 4.5% values of the ones by the maneuvering indices, when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$, these new course distances were therefore found to be small in difference of those. 3) The mean difference of the distance between two new course distances by the turning circle test and the observation of the experimental ship was about 6.1% values of the ones by the observation, when her altering angles were $48^{\circ}$, $63^{\circ}$and $70^{\circ}$, using the rudder angle of $35^{\circ}$. These new course distances were therefore found to be small in difference of those. 4) It is confirmed that many new course distances for many angles can be calculated easily by using the method of ship's simple turning circle test, without observation or using the maneuvering indices and heading test method. 5) It is considered to be helpful for the safety of ship handling to draw curves of new course distances by turning circle test and $\phi_4$ - $\phi_2 by heading test, and utilize them at sea.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.2
• /
• pp.68-74
• /
• 2015

To compare the microstructure and electrochemical properties between two binary alloys (Cr-Si, Ni-Si), two composition of binary alloys with the same capacity were selected using phase-diagram and prepared by matrix-stabilization method to suppress the volume expansion of Si by inactive-matrix. Master alloys were made by Arc-melting followed by fine structured ribbon sample preparation by Rapid Solidification Process (RSP, Melt-spinning method) under the same conditions. Also powder samples were produced by wet grinding for X-Ray Diffraction (XRD) and electrochemical measurements. As predicted from the phase diagram, only active-Si and inactive-matrix ($CrSi_2$, $NiSi_2$) were detected. The results of Scanning Electron Microscope (SEM) and Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy (TEM-EDS) show that Cr-Si alloy has finer microstructure than Ni-Si alloy, which was also predictable through phase diagram. The electrochemical properties related to microstructure were evaluated by coin type full- and half-cells. Separately, self-designed test-cells were used to measure the volume expansion of Si during reaction. Volume expansion of Cr-Si alloy electrode with finer microstructure was suppressed significantly and improved in cycle capability, in comparison Ni-Si alloy with coarse microstructure. From these, we could infer the correlation of microstructure, volume expansion and electrochemical degradation and these properties might be predicted by phase diagram.