DOI QR코드

DOI QR Code

Development of Route following Algorithm for Application in Collision Avoidance Routes of Maritime Autonomous Surface Ship

자율운항선박의 회피 항로 적용을 위한 항로 추종 알고리즘 개발

  • 차승태 (마린전자상사 기업부설연구소 ) ;
  • 정유준 (마린전자상사 기업부설연구소 )
  • Received : 2023.11.01
  • Accepted : 2023.11.29
  • Published : 2023.12.31

Abstract

Recently, the demand for autonomous navigation technology has increased, and related research is also increasing. Autonomous ships generally follow the planned route, calculate the avoidance route according to the risk situation while sailing, and follow a calculated route. In general, an automatic steering device is used to follow the route, and among the operational automatic steering device methods, the route control mode is the most appropriate method to apply to autonomous ships. Therefore, in this study, we developed a route-tracking algorithm to apply an avoidance route using the navigation control mode of an automatic steering device. The algorithm was developed by dividing the straight and turning sections. A performance test was conducted to satisfy the performance suggested by IEC 62065, the relevant international standard, using simulator equipment that had acquired international certification to verify its performance. The results of the performance verification confirmed that the cross-track error, which represents the straight distance between the ship and the route, satisfied the performance standards suggested by IEC 62065 when the ship followed the route.

최근 자율 항해 기술의 수요가 높아져 관련 연구도 증가하는 추세이다. 자율운항선박들은 일반적으로 계획 항로를 추종하여 항해하는 도중 위험 상황에 따라 회피항로를 산출하고 산출된 항로를 추종한다. 항로 추종에는 일반적으로 자동조타장치가 활용되며, 자동조타장치의 운용 방식 중, 항로제어 모드를 자율운항선박에 적용하는 것이 현 시점에서 가장 적절한 방안이다. 따라서 본 논문에서는 자동조타장치의 항해제어 모드를 활용해 회피 항로를 적용하기 위한 항로 추종 알고리즘을 개발한다. 알고리즘은 직선구간과 선회구간을 구분하여 개발하였으며, 이에 대한 성능을 검증하기 위해 국제 인증을 취득한 시뮬레이터 장비를 사용하여 관련 국제 표준인 IEC 62065에서 제시한 성능을 만족하기 위한 성능 시험을 진행하였다. 성능 검증 결과로 보았을 때, 선박이 항로를 추종함에 있어서 선박과 항로 사이의 직선거리를 나타내는 Cross Track Error가 IEC 62065에서 제시하는 성능 기준을 만족하는 것을 확인하였다.

Keywords

Acknowledgement

이 논문은 2023년도 해양수산부부 재원으로 해양수산과학기술진흥원의 지원을 받아 수행된 연구임 (20210623, 해양수산산업 핵심 기자재 국산화 기술개발)

References

  1. Choi, W. J. and Jun, S. H.(2022), "Development of Sailing Algorithm for Ship Group Navigation System", Journal of Korean Navigation and Port Research, Vol. 46, No. 6, pp. 554-561.
  2. Dynautics Ltd(2018), Dynautics ShipSim 3 User Namual, pp. 1-103.
  3. International Electrotechnical Commission(2014), IEC 62065 Maritime navigation and radiocommunication equipment and systems - Track control systems -Operational and performance requirements, methods of testing and required test results, pp. 1-104.
  4. International Electrotechnical Commission(2016), IEC 61162-1 Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners, pp. 34-131.
  5. International Maritime Organization(2018), IMO takes first steps to address autonomous ships, https://www.imo.org/en/MediaCentre/PressBriefings/Pages/08-MSC-99-mass-scoping.aspx
  6. International Maritime Organization(2021), Autonomous ships: regulatory scoping exercise completed, https://www.imo.org/en/MediaCentre/PressBriefings/pages/MASSRSE2021.aspx
  7. International Maritime Organization(2023), Symposiumon "Making headway on the IMO MASS Code", https://www.imo.org/en/MediaCentre/MeetingSummaries/Pages/Symposium-on-%CA%BAMaking-headway-on-the-IMO-MASS-Code%E2%80%9D-.aspx
  8. International Organization for Standardization(2019), ISO 11674 Ships and marine technology - Heading control systems, pp. 1-54.
  9. Woo, S. M.(2019), "A Modeling of Core Systems and Agents in Vessel based on DEVS Formalism and Navigation Simulation", Korea Maritime and Ocean University, Master Dissertation.