• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.258-264
• /
• 2016

In this paper, we propose a computationally efficient direction of arrival (DoA) estimation algorithm based on propagator method with non-uniform array. While the co-prime array techniques can improve the resolution of DoA, they generally lead to high computational complexity as the length of the coarray aperture. To reduce the complexity we use the propagator method that does not require singular value decomposition (SVD). Through simulations, we compare MUSIC with uniform lineary array, propagator method with uniform linear array, MUSIC with co-prime array, and the proposed scheme and observe that the performance of the proposed scheme is significantly better than MUSIC or propagator method with uniform linear array while it is slightly worse than computationally much more expensive co-prime array MUSIC scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.95-110
• /
• 2012

The effect of a finite substrate size on the radiation characteristics of a two-element linear E-plane array antenna using microstrip patch antennas is investigated. The average active element pattern characteristics of two-element E-plane array antennas printed on different dielectric constant substrates with various substrate sizes and element spacings are analyzed. Using the average active element pattern, the radiation pattern characteristics of the array antenna versus scan angle is analyzed. The simulation results show that the diffracted fields of surface waves from substrate edges have a significant effect on the radiation characteristics of a 2-element E-plane array antenna. The distance between the center of patch antenna and the substrate edges on the E-plane for the enhancement of radiation characteristics of the array antenna is about $0.35{\lambda}_0$.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.5
• /
• pp.416-423
• /
• 2009

The ultrasonic pressure fields for the 3 MHz linear phased array transducer with sixteen piezoelectric elements of which one may not be operated by defect were simulated theoretically and measured experimentally using a visualization system of the Schlieren method. The simulation results for steering angles of $0^{\circ}$ and $30^{\circ}$ show that the side-lobe patterns of the transducer including a defective element is quite different from the transducer with all normal elements, and those patterns are in good agreement with the results of visualization. It is shown that the defective elements in a linear array transducer can be detected by comparison of the simulated and the visualized side-lobe patterns in two dimensional acoustic fields.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3C
• /
• pp.241-247
• /
• 2002

In this paper, we proposed a continuously variable true time-delay for transmit linear phased-array antenna sing chirped fiber gratings(CFGs) and a tunable laser source. Average group delay-slope of the CFG was treasured to be 177 ps/nm at L-, S-, and X-band. Simulation results show that the maximum gain of the transmit linear phased-array antenna with the beam steering angle of 180$^{\circ}$ is 11.6 dB at 10 GHz.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.833-841
• /
• 2013

In the case of composite material, a variety of characteristics were expressed depending on the materials that were composed of. In this study, the materials showing non-linear shear behavior were investigated among FRP composite. Each specimen was designed and analyzed according to ASTM D4255 method: regulations on the 2-rail. The dependent variables included in this experiment were a variety of fiber, fiber volume ratio, fiber array direction, temperature, material homogeneity. For determination of characteristics based on the fiber array, fiber array direction of 0, 30, 45, and 60 degrees were selected for test specimen. Temperature of 25, 40, 60, and $80^{\circ}C$ were considered for investigation of FRP materials'shear behavior based on the external temperature. Nonlinear shear behavior was observed throughout the FRP composite material in this study. Also, using vinyl ester resins, high fiber volume ratio, and fiber array direction of 45 degree appeared to show the most prominent nonlinear shear behavior. As for the findings related to the temperature change, non-linear behavior was decreased as the external temperature increased. For factory manufactured product, non-linear behavior was relatively at parity in comparison to the behavior found in the hand lay-up FRP composite specimen.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.8
• /
• pp.1818-1827
• /
• 2004

This paper carried out numerical calculation about the directivity synthesis problem in two dimension of adaptive ultrasonic transducers. Adaptive system for directivity synthesis is constructed by multi-electrode array on the surface of only one piezoelectric ceramic plate combined with optimal algorithm. In order to realize the desired directivity that is established arbitrarily, the optimal vibrational displacement is calculated by optimal algorithm (DFP method). Secondly, the optimal voltage of electrodes which is correspond to the calculated vibrational displacement is calculated used by finite element method and DFP method. And, the vibration analysis in two dimension of piezoelectric transducer carried out by means of finite element method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.9
• /
• pp.52-59
• /
• 2009

In this paper, the planar waveguide slotted array antenna is presented, which has the 3-layered structure of feeding networks for a high gain. Due to the ionosphere which generates 'Faraday rotation', the skew is happened between the signal radiated from an artificial satellite and the receiving antenna. This causes a polarization loss. In this paper, to remove this polarization loss, the dumbbell shaped linear polarizer using a single layer film is proposed. The gain of proposed antenna is 29.4dB.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.266-269
• /
• 2003

마이크로파 대역에서 넓은 공진 주파수 대역폭을 갖는 V 형 테이퍼드 슬롯 안테나와 1x4 선형 배열 안테나를 설계하였다. 설계주파수는 5.8 [GHz]이었고 비유 전율이 3.48 인 RO4350 기판을 사용하였으며 멀티옥타브 특성과 복사 패턴을 얻었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.961-963
• /
• 2004

써픽스 배열은 텍스트의 써픽스들을 사전적 순서대로 저장하여 검색을 효율적으로 할 수 있는 자료구조이다. 생물학에서의 DNA 스트링과 같이 긴 텍스트에 대해 써픽스 배열을 이용하면 빠르게 검색할 수 있다. 써픽스 배열은 유사한 자료구조인 써픽스 트리에 비해 적은 공간을 차지하기 때문에 생물학에서 사용하는 긴 텍스트의 처리에 유리하다. 최근, 텍스트에서 바로 써픽스 배열을 선형시간에 구축하는 알고리즘들이 발표되었다. 그러나 이들 알고리즘은 정수 문자집합을 위한 알고리즘들이었다. 본 논문에서는 고정길이 문자집합에 대해 써픽스 배열을 빠르게 구축하는 알고리즘을 소개한다. 그리고 실험을 통해서 DNA 스트링과 같은 고정길이 문자집합에 대해서 다른 알고리즘들과 구축시간을 비교하여 속도 향상이 있음을 보인다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.353-356
• /
• 2002

심근 경색 및 뇌졸중 등 혈관과 관련된 질환들의 진단 및 치료의 목적으로 미세 크기의 원형 배열 초음파 트랜스듀서가 사용되고 있다. 원형 배열 초음파 트랜스듀서는 종래의 선형 배열 트랜스듀서에 비해 반경 방향의 입체적 진단을 가능케 하고 높은 감도 및 해상도를 구현할 수 있는 장점을 가진다. 본 연구에서는 이러한 원형 배열 초음파 트랜스듀서의 개발을 위하여, 유한요소법 및 이론적인 해석으로 트랜스 eb서의 방사특성을 분석함으로써 무지향성을 이루기 위한 트랜스듀서 내 진동자의 최적 규격을 설정하였다. 나아가 해석 결과에 따라 직경이 약 10mm정도가 되는 알루미나 $Al_2O_3$ 튜브에 32개의 진동자가 원형으로 배열된 트랜스 듀서 시작품의 제작 및 방사특성 측정 실험을 수행함으로써 설계 결과의 타당성을 검증하였다.