• Journal of KIISE
• /
• v.45 no.1
• /
• pp.69-75
• /
• 2018

In the streaming data where data samples arrive sequentially in time, it is difficult to apply the dimension reduction method based on batch learning. Therefore an incremental dimension reduction method for the application to streaming data has been studied. In this paper, we propose an incremental linear discriminant analysis method using the least squared error solution. Instead of computing scatter matrices directly, the proposed method incrementally updates the projective direction for dimension reduction by using the information of a new incoming sample. The experimental results demonstrate that the proposed method is more efficient compared with previously proposed incremental dimension reduction methods.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.132-139
• /
• 2009

The objective of this study was to investigate the most effective analysis methods for palatability grading of Hanwoo beef by comparing the results of discriminant analysis with sensory data. The sensory data were obtained from sensory testing by 1,300 consumers evaluated tenderness, juiciness, flavor-likeness and overall acceptability of Hanwoo beef samples prepared by boiling, roasting and grilling cooking methods. For the discriminant analysis with one factor, overall acceptability, the linear discriminant functions and the non-parametric discriminant function with the Gaussian kernel were estimated. The linear discriminant functions were simple and easy to understand while the non-parametric discriminant functions were not explicit and had the problem of selection of kernel function and bandwidth. With the three palatability factors such as tenderness, juiciness and flavor-likeness, the canonical discriminant analysis was used and the ability of classification was calculated with the accurate classification rate and the error rate. The canonical discriminant analysis did not need the specific distributional assumptions and only used the principal component and canonical correlation. Also, it contained the function of 3 factors (tenderness, juiciness and flavor-likeness) and accurate classification rate was similar with the other discriminant methods. Therefore, the canonical discriminant analysis was the most proper method to analyze the palatability grading of Hanwoo beef.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.295-298
• /
• 2007

본 논문에서는 사람의 얼굴표정을 통해 4개의 기본감정(기쁨, 슬픔, 화남, 놀람)에 대한 특징을 추출하고 인식하여 그 결과를 이용하여 감정표현 시스템을 구현한다. 먼저 주성분 분석(Principal Component Analysis)법을 이용하여 고차원의 영상 특징 데이터를 저차원 특징 데이터로 변환한 후 이를 선형 판별 분석(Linear Discriminant Analysis)법에 적용시켜 좀 더 효율적인 특징벡터를 추출한 다음 감정을 인식하고, 인식된 결과를 얼굴 표현 시스템에 적용시켜 감정을 표현한다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.489-490
• /
• 2008

본 고에서는 체내 심실신호를 농하여 신경학적 분석 및 다형성의 측면에서 심실세동이 일어나는 것을 예측하는 분석 알고리즘을 설계하였다. 신경학적 측면에서는 시계열 신호의 Peak to Peak Interval을 예측법과 0.15Hz를 기준으로 HRV 신호의 AR Burg 모델링을 통하여 고주파성과 저주파성을 나누어 교감신경과 부교감신경의 활동성 통한 신경학적 예측법을 제시하였으며 또한 체내 심실신호의 비선형적 특성을 고려한 Fractal Dimension을 생성시킴으로서 주기성의 특성과 다형성 통한 예측법을 제시하였다. 체내 심전도를 기반으로 Simulation 하였으며 각 분석별 조합을 통하여 최적의 예측 구조를 찾고자 하였다. 의학적 의미가 있는 민감도와 특이도를 판별하였으며 예측을 위한 수행시간을 실험하였다. 이를 통하여 자율신경 활성도와 다형성 판별을 조합한 방법이 심실세동 예측을 위한 민감도의 측면에서 가장 우수함을 나타내었고 시뮬레이션을 위만 시뮬레이터(Simulator) UI(User Interface)를 제시하였다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.42-53
• /
• 2012

In pattern recognition and machine learning society, classification has been a classical problem and the most widely researched area. Adaptive boosting also known as Adaboost has been successfully applied to binary classification problems. It is a kind of boosting algorithm capable of constructing a strong classifier through a weighted combination of weak classifiers. On the other hand, the PCA and LDA algorithms are the most popular linear feature extraction methods used mainly for dimensionality reduction. In this paper, the combination of Adaboost and feature extraction methods is proposed for efficient classification of two class data. Conventionally, in classification problems, the roles of feature extraction and classification have been distinct, i.e., a feature extraction method and a classifier are applied sequentially to classify input variable into several categories. In this paper, these two steps are combined into one resulting in a good classification performance. More specifically, each projection vector is treated as a weak classifier in Adaboost algorithm to constitute a strong classifier for binary classification problems. The proposed algorithm is applied to UCI dataset and FRGC dataset and showed better recognition rates than sequential application of feature extraction and classification methods.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.313-320
• /
• 2010

The purpose of this study was to evaluate the freshness of chicken meat during 19 d of storage at $4^{\circ}C$ using a portable electronic nose. The portable system consisted of six different metal oxide sensors and a moisture sensor. Determination of volatile compounds with gas chromatography-mass spectrometry, total bacterial count (TBC), and 2-thiobarbituric acid reactive substances (TBARS) monitored the quality change of the samples. These results were compared with the results measured by the electronic nose system. TBC and TBARS measurements could be separated into five groups and seven groups, respectively, among ten groups. According to principal component analysis and linear discriminant analysis with the signals of the portable electronic nose, the sample groups could be clearly separated into eight groups and nine groups, respectively, among ten groups. The portable electronic nose demonstrated potential for evaluating freshness of stored chicken.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.748-755
• /
• 2010

In this paper we propose an improved face recognition method using Gabor tensor. Gabor transform is known to be able to represent characteristic feature in face and reduced environmental influence. It may contribute to improve face recognition ratio. We attempted to combine three-dimensional tensor from Gabor transform with MPCA(Multilinear PCA) and LDA. MPCA with tensor which use various features is more effective than traditional one or two dimensional PCA. It is known to be robust to the change of face expression or light. Proposed method is simulated by MATALB9 using ORL and Yale face database. Test result shows that recognition ratio is improved maximum 9~27% compared with exisisting face recognition method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.185-194
• /
• 2014

One in every 10 persons suffer from chronic gastritis in Korea. Endoscopy is most commonly used to diagnose the chronic gastritis. Endoscopic diagnosis is precise but it is accompanied with pain and high cost. According to pulse diagnosis in Traditional East Asian Medicine, health problems in stomach can be diagnosed with radial pulse signals in 'Guan' location in the right wrist, which are non-invasive and cost-effective. In this study, we developed a classification model of chronic gastritis using pulse signals in right 'Guan' location. We used both linear discrimination method and logistic regression model with respect to pulse features obtained with a peak-valley detection algorithm and a Gaussian model. As a result, we obtained sensitivity ranged between 77%~89% and specificity ranged between 72%~83% depending on classification models and feature extraction methods, and the average classification rates were approximately 80%, irrespective of the models. Specifically, the Gaussian model were featured by superior sensitivities (89.1% and 87.5%) while the peak-valley detection method showed superior specificities (82.8% and 81.3%), and the average classification rate (sensitivity + specificity) of the Gaussian model was 80.9% which was 1.2% ahead of the peak-valley method. In conclusion, we obtained a reliable classification model for the chronic gastritis based on the radial pulse feature extraction algorithms, where the Gaussian model was featured by outperformed sensitivity and the peak-valley method was featured by outperformed specificity.

• The KIPS Transactions:PartD
• /
• v.19D no.2
• /
• pp.147-150
• /
• 2012

While LDA is a supervised dimension reduction method which finds projective directions to maximize separability between classes, the performance of LDA is severely degraded when the number of labeled data is small. Recently semi-supervised dimension reduction methods have been proposed which utilize abundant unlabeled data and overcome the shortage of labeled data. However, matrix computation usually used in statistical dimension reduction methods becomes hindrance to make the utilization of a large number of unlabeled data difficult, and moreover too much information from unlabeled data may not so helpful compared to the increase of its processing time. In order to solve these problems, we propose an ensemble approach for semi-supervised dimension reduction. Extensive experimental results in text classification demonstrates the effectiveness of the proposed method.

• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.87-92
• /
• 2007

Recently, developments of process monitoring system in order to detect and diagnose process abnormalities has got the spotlight in process systems engineering. Normal data obtained from processes provide available information of process characteristics to be used for modeling, monitoring, and control. Since modern chemical and environmental processes have high dimensionality, strong correlation, severe dynamics and nonlinearity, it is not easy to analyze a process through model-based approach. To overcome limitations of model-based approach, lots of system engineers and academic researchers have focused on statistical approach combined with multivariable analysis such as principal component analysis (PCA), partial least squares (PLS), and so on. Several multivariate analysis methods have been modified to apply it to a chemical process with specific characteristics such as dynamics, nonlinearity, and so on.This paper discusses about missing value estimation and sensor fault identification based on process variable reconstruction using dynamic PCA and canonical variate analysis.