• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.357-360
• /
• 2002

본 논문에서는 CCD 흑백 카메라를 이용하여 입력되는 인쇄체 한글 이미지의 문자를 인식하여 편집 가능한 텍스트 문서로 변환하는 시스템을 구현하였다. 문자 인식에 있어서 잡음에 강한 경계선 기울기 방법을 이용함으로써 문자의 구조적 특성에 근거한 윤곽선 정보를 추출할 수 있었다. 이를 이용하여 각 문자 이미지의 수평 및 수직 모음을 인지하고 6가지 유형으로 분류한 후, 자소 단위로 분리하고 최대 길이투영을 사용하여 모음을 인식하였다 분리된 자음은 경계선이 변화되는 위상의 형태를 미리 저장된 표준패턴과 비교하여 인식하였다. 인식된 문자는 KS 한글 완성형 코드로 문서 편집기에 출력되어 사용자에 제공되는 시스템을 구현하였다.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.422-431
• /
• 2009

The analytical results of wear metals such as Na, Mg, Al, Si, P, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Mo, Ag, Cd, Sn, Ba, Pb in oil samples are compared by portable and bench-top XRF methods as a basic study for the development of portable X-ray fluorescence spectrometer. The instrumental parameters such as measurement time of portable and bench-top XRF were optimized using certified reference materials of hydrocarbon oil with 20 wear metals in concentration range from 10 to 900 mg/kg. The analytical results of 20 wear metals in certified reference materials and new/used engine oil samples were compared by empirical and fundamental parameter methods.

• Proceedings of the CALSEC Conference
• /
• 2000.08a
• /
• pp.291-303
• /
• 2000

◈ 개요 ㆍ PC표준 USB포트에 바로 연결하여 사용 ㆍ 열쇠 크기의 휴대용 개인 정보보호 장치 ◈ 휴대용 전자서명기 ㆍ 별도의 리더기가 필요 없음 ㆍ Strong Authentication (Two-Factor 인증)(중략)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.78-84
• /
• 2007

A multistandard direct-conversion mixer for WCDMA, Wibro, and 802.11a/b/g is designed in 0.18 um CMOS technology To support multistandard and to reduce the chip area the switched inductor is used as the matching method. This switched inductor matching network selects the mixer's operation frequency band by turning on or off the switch transistor. Since the performances of mixer and operation frequency can be affected by the parasitic of switch transistor the mixer should be designed with the optimized size of switch to minimize parasitic effects. Proposed mixer is able to achieve return loss less than -13 dB in $2.1\sim2.5GHz$ and $5.1\sim5.9GHz$ bands with the suitable performance to meet requirements of WCDMA, WiBro, and 802.11a/b/g.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.97-101
• /
• 2017

X-ray diffractometers are used to characterize material properties, such as the phase, texture, lattice constant and residual stress, based on the diffracted beams obtained from specimens. Quantitative analyses using X-rays are typically conducted by measuring the peak positions of the diffracted beams. However, the long-term use of the diffractomer, like any other machine, results in errors associated with the mechanical parts, which can deteriorate the accuracy of the quantitative analyses. In this study, the process of correcting systematic errors in the $2{\theta}$ range of $30{\sim}90^{\circ}$ is discussed, for which strain-free Si powders from NIST were used as the standard specimens. For the evaluation of the impact of such error correction, we conducted a quantitative analysis of the true lattice constant for tungsten thin films.

• Journal of the Korean Society of Radiology
• /
• v.13 no.5
• /
• pp.819-824
• /
• 2019

In this study, we proposed a method for identifying isotopes generated from high-energy proton $^{nat}Pb$(p,xn) nuclear reactions through the difference of gamma rays generated through nuclear reactions using different proton energies. The experiment was performed by using a high energy proton generated from a 100 MeV proton linear accelerator of the Korea Atomic Energy Research Institute. Gamma rays generated by various nuclides generated through proton nuclear reactions were measured using a gamma-ray spectroscopy system composed of HPGe detectors. Gamma-ray standard sources were used for accurate energy calibration and efficiency measurements of HPGe gamma-ray detectors. For the proposed method, 100 and 60 MeV proton energy beams were used for the same natural lead samples. This method was found to be very effective in identifying nuclides produced by comparing gamma rays generated from the same sample with each other. The results of this study are expected to be very effective in obtaining other proton nuclear reaction results in the future.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.451-463
• /
• 2021

In this study we conducted component analyses of portable XRF detectors using four Au-Cu alloy standard samples to improve their accuracy by drawing up a calibration curve based on ICP-OES standard values. The portable XRF analysis found absolute errors of 0.3 to 3.7 wt% for Au and 0.2 to 8.2 wt% for Cu, confirming that the error range and standard deviation differed from one detector to another. Furthermore, the calibration curve improved their accuracy, such that the relative error rates of Au and Cu decreased from 9.8% and 14% to 3.5% and 3.7%, respectively. Accordingly, an experiment to confirm the calibration curve was conducted using unknown samples, finding that the measured values of the unknown samples fell on the calibration curve. Therefore, to accurately analyze the components of metal cultural heritage items, it is necessary to prepare a calibration curve for each element after checking whether the detector is suitable for the artifact.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.12
• /
• pp.1018-1024
• /
• 2013

On-Board computers (OBC) for LEO & GEO satellites have been developed with their own dedicated architecture so far even though they have many similar functionalities. In this paper, we present a conceptual study results of standard OBC architecture design and propose the domestic development plan for the next generation satellite OBC. Proposed architecture is highly flexible and can be used at LEO/MEO/GEO and Moon Explorer/Deep Space Probe. Also, we introduce current status of standard OBC which is under development.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.215-217
• /
• 2017

기술의 발달에 따라 무인표지에도 기존의 등명기 이외에도 Racon, Fog Detector, 전기폰, 기상 및 해양 관측장비, 휴대폰 중계기 등 전력을 필요로하는 다양한 장비가 설치되고 잇는 실정인데 반해, 현재의 무인표지 전력제어시스템은 기존의 관습대로 등대 내 협소한 구내에 축전지, 충방전 조절기, 전력선 등이 널 부러져 있는 상태로서 효과적인 전력관리와 능률적이고도 안전한 전력 관리를 위하여는 종합적 전력제어시스템 설치가 필요한 실정이다.. 이 연구에서는 현재 무인표지의 전력 시스템을 체계적이고도 안전한 방법으로 관리 할 수 있으며, 축전지 잔량표시, 저전압 충전시스템, 낙뢰피해 방지 및 원격 감시기능 등 기능적인 측면에서도 뛰어난 성능을 가질 수 있도록 무인등대용 표준전력제어장치를 연구 개발하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11b
• /
• pp.673-676
• /
• 2003

현재 무선 인터넷 컨텐츠는 유선 컨텐츠와 호환이 되지 않으며 다양한 종류의 무선 마크업 언어들로 구성되어 있어 무선 컨텐츠를 재구축해야 하는 문제점이 있다. 본 논문에서는 이를 해결하기 위해 유선 컨텐츠를 재사용하는 방안으로 XML 기반의 유무선 컨덴츠 변환기를 설계한다. 컨텐츠 변환의 중간 표준포맷으로 XML 문서를 생성하므로 새로운 언어로의 변환을 고려할 때 해당 프리젠테이션 변환모듈만 추가시키면 확장 가능하므로 유지보수가 쉽고 효율적인 변환이 가능하다. 따라서 새로운 표준과 기술 변화에 대응이 용이하며 또한 유선 컨텐츠의 재사용으로 인해 개발비용이 절감되고 개발기간이 단축되므로 빠른 무선 인터넷 시장 진입이 가능해진다.