• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.1
• /
• pp.3-15
• /
• 1997

Iron oxide compounds in 8 selected Cheju Island soil samples have been analized by X-ray fluorescence spectrometer(XRF), X-ray diffractometry(XRD), selected chemical techniques, and $M{\ddot{o}}ssbauer$ spectroscopy. The result of this analysis by XRF shows that the rate of quantity of $Fe_2O_3$ in 8 soil samples was from 8.03wt.%(Daejeong paddy soil) to 18.21wt.%(Songag soils). Songag, Heugag and Gueom soils were detected to have lower peaks of intensity of hematite by XRD. In addition, these soils were not detected to have hematite and goethite peaks. Ferrihydrite, which is a short-range-order mineral commonly present in volcanic ash soil, was not detected by XRD due to low concentration and/or poor cristallinity. Ferrihydrite contents estimated from Feo values were 8.8~35.2g/kg for volcanic ash soils and 0.85g/kg for the Daejeong soil. Most of the soil samples represented by the paramagnetic $Fe^{3+}$ doublet obtained from $M{\ddot{o}}ssbauer$ spectra at room temperature and 18K were considered to arise from the presence of ferrihydrite, superparamagnetic goethite, and silicate minerals. Also the paramagnetic $Fe^{2+}$ doublets are attributable to primary minerals such as olivine, illite, chlorite, augite, biotite, and hornblende. Goethite and hematite were identified as the dominant crystalline iron oxides in these soils from $M{\ddot{o}}ssbauer$ spectra obtained at room temperature and 18K. All the soil samples exhibited strong superparamagnetic relaxation. Collapse of the $M{\ddot{o}}ssbauer$ magnetic hyperfine splitting at room temperature was due to the small size(${\sim}180{\AA}$) of the oxide particles and/or Al-subsituted goethite.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2005

Many different kinds of radwastes are discharged from the nuclear power plants, and $^{129}$I is included in these radwastes. Recovery test of $^{129}$I was evaluated for different radwastes(dry active waste, sludge, spent resin and simulated evaporator bottom). Recovery of $^{129}$I for dry active waste by acid leaching with $1.8\%$ NaClO was $74.3\%$$(RSD,\;2.2\%)$ and l291 for spent rein by alkali fusion method with KOH as a flux agent was $87.7\%$$(RSD,\;0.9\%$), respectively. iodide in simulated evaporator bottom containing a high concentration of borate was adsorbed with anion exchange resin at pH 7 phosphate buffer solution. Recovery of $^{129}$I for anion exchange resin was $92.5\%$ and not affected up to 1,200 $\mu$g/mL $H_3BO)3$(as a Boron). Recovery of $^{129}$I for the spent resin from nuclear power plant was $87.2\%$ $(RSD,\;1.2\%)$.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.525-534
• /
• 2014

Environmental problems typically occurring in abandoned mine lands (AML) include: contaminated and acidic surface water and groundwater; stockpiled waste rock and mill tailings; and ground subsidences due to mining operations. This study examines the effectiveness of various geophysical techniques for mapping potential hazard and contaminated zones. Four AML sites with sedimentation contamination problems, acid mine drainage (AMD) channels, ground subsidence, manmade liner leakage, and buried mine tailings, were selected to examine the applicability of various geophysical methods to the identification of the different types of mine hazards. Geophysical results were correlated to borehole data (core samples, well logs, tomographic profiles, etc.) and water sample data (pH, electrical conductivity (EC), and heavy metal contents). Zones of low electrical resistivity (ER) corresponded to areas contaminated by heavy metals, especially contamination by Cu, Pb, and Zn. The main pathways of AMD leachate were successfully mapped using ER methods (low anomaly peaks), self-potential (SP) curves (negative peaks), and ground penetrating radar (GPR) at shallow penetration depths. Mine cavities were well located based on composite interpretations of ER, seismic tomography, and well-log records; mine cavity locations were also observed in drill core data and using borehole image processing systems (BIPS). Damaged zones in buried manmade liners (used to block descending leachate) were precisely detected by ER mapping, and buried rock waste and tailings piles were characterized by low-velocity zones in seismic refraction data and high-resistivity zones in the ER data.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.28-35
• /
• 2021

An experiment was conducted to separate or recover Co and Ni using Cyanex 301 from process by-products and waste resources containing Co and Ni. To separate and recover Co and Ni from simulated leaching solutions, 10 v/v% Cyanex 301 was used as an extractant in this study; Li was not extracted. At equilibrium pH 1.5 and a phase ratio (A/O) of 1.0, 0.44% of Mg and 11.57% of Mn were extracted, and more than 99% of Co and Ni were extracted. McCabe-Thiele diagram analysis confirmed that more than 99.9% of Co and Ni could be extracted simultaneously through two-stage extraction with an extraction phase ratio (A/O) of 2. It was possible to extract Mg and Mn simultaneously through the scrubbing process. In the scrubbing process, more than 99% of Mg and 87% of Mn were scrubbed using 0.05 M of H₂SO₄, and 99.9% of Mg and more than 80% of Mn were scrubbed using 0.05 M of HCl. In the stripping process, 93% of Co and 5% of Ni were stripped selectively by 3.0 M of H₂SO₄. However, when 8.0 M of HCl was used as a stripping solution, more than 99.9% of Co and more than 90% of Ni were stripped simultaneously.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.185-195
• /
• 2022

To enable the widespread use of buckwheat and create novel consumer demands through improved food processing techniques, we compared the quality characteristics of roasted groats following different processing and brewing methods for common and tartary buckwheat. The various processing steps resulted in significant reductions in rutin content for both buckwheat species, while the quercetin content increased in the tartary buckwheat. The fully processed tea products showed dramatic differences in rutin content, which varied based on the buckwheat species, formulation, and brewing method. Tartary buckwheat contained an average of 61 times more rutin than common buckwheat. The tartary buckwheat variety, Hwanggeum-miso, was used to determine an optimal roasting temperature of 70-80℃. Finally, we suggest that consumers who want buckwheat tea rich in rutin would prefer hand-drip-extracted tea, while those who want tea with less bitterness, sweetness, and good flavor would prefer the cold-brewed method.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.86-94
• /
• 1991

Volcanic ash soils were classified as Andepts, a suborder of the Inceptisols in Soil Taxonomy. Increased knowledge on the volcanic ash soils necessitated and facilitated considerable improvement in this system. As a result, the new Order of Andisols was incorporated in the 1990 edition of the Keys to Soil Taxonomy. The central concept of an Andisol is that of a soil developing in volcanic ejecta, and/or in volcaniclastic materials, whose colloidal fractions are dominated by short-range-order minerals or Al-humus complexes. Andic propertis of volcanic ash soil in Cheju Island were investigated. For this study, soils of toposequence distributed along the southern slope of Mt. Halla, and the major soil groups such as dark brown soils, very dark brown soils, black soils, and brown forest soils were collected and analyzed for Al, Fe and Si extracted with solutions of pyrophosphate, dithionite-citrate. and oxalate respectively. Weolpyeong and Yongheung soils developed on the lower elevations contain only small amounts of allophane and Al-and Fe-humus complexes. For other soils, allophane content decrease with elevation and increaes with soil depth,whereas Al-humus complexes increase with elevation and decrease with soil depth. Substantial amount of allophane and ferrihydrite are found in all horizons of Ora and Ara soils developed on 150-300m elevations and of Noro and Jeogag soils developed on cinder cones. In the A horizons of Pyeongdae, Tosan and Heugag soils developed on the higher elevations, Al-humus complexes are dominant form of Al reflecting low pH and high organic matter content. However, lower horizons are dominated by allophane.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.3
• /
• pp.87-95
• /
• 2003

Although extensive studies were conduced on hydrogen fermentation of organic wastewaters, little is known about biohydrogen production from organic solid wastes. The leaching-bed reactor treating food waste by heat-shocked anaerobic sludge was, therefore, operated at D of 2.1, 3.6, 4.5 and $5.5d^{-1}$ to find optimal D for hydrogen production. Successful operation of a reactor can be accomplished when it is operated at proper dilution rate (D). Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. All the reactors showed that, on day 1-3, hydrogen production was dominant and VFA concentration was higher than ethanol. Butyrate and acetate were major components of VFAs over the whole operation, though lactate was very high on day 1-2. Compared with other D values, D of $4.5d^{-1}$, resulted in higher butyrate/acetae (B/A) ratios during the fermentation. The trend of B/A ratios was similar to the hydrogen production, suggesting that butyrate formation favored hydrogen production. Ethanol increased significantly from day 4 when hydrogen Production stopped. It indicated that heat-shocked sludge was able to induce a metabolic flow from hydrogen-and acid-producing pathway to solvent-producing pathway. Operation at D of $4.5d^{-1}$ led to higher fermentation efficiency (58%) than those (51.5, 55.3 and 53.7%) at 2.1, 3.6 and $5.5d^{-1}$. The COD removed was convened to hydrogen (10.1%), VFA (30.9%), and ethanol (17.0%).

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.311-325
• /
• 2007

The concept of metal bioavailability, rather than total metal in soils, is increasingly becoming important for a thorough understanding of risk assessment and remediation. This is because bioavailable metals generally represented by the labile or soluble metal components existing as either free ions or soluble complexed ions are likely to be accessible to receptor organismsrather than heavy metals tightly bound on soil surface. Consequently, many researchers have investigated the bioavailability of metals in both soil and solution phases together with the key soil properties influencing bioavailability. In order to study bioavailability changes various techniques have been developed including chemical based extraction (weak salt solution extraction, chelate extraction, etc.) and speciation of metals using devices such as ion selective electrode (ISE) and diffusive gradient in the thin film (DGT). Changes in soil metal bioavailability typically occur through adsorption/desorption reactions of metal ions exchanged between soil solution and soil binding sites in response to changes in environment factors such as soil pH, organic matter (OM), dissolved organic carbon (DOC), low-molecular weight organic acids (LMWOAs), and index cations. Increasesin soil pH result in decreases in metal bioavailability through adsorption of metal ions on deprotonated binding sites. Organic matter may also decrease metal bioavailability by providing more negatively charged binding sites, and metal bioavailability can also be decreases as concentrations of DOC and LMWOAs increase as these both form strong chelate complexeswith metal ions in soil solution. The interaction of metal ions with these soil properties also varies depending on the soil and metal type.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.18-24
• /
• 2012

Lignocellulose is difficult to hydrolyze due to the presence of lignin and the technology developed for cellulose fermentation to ethanol is not yet economically viable. However, recent advances in the extremely new field of biotechnology for the ethanol production are making it possible to use of Agriculture residual biomass, e.q., Barley straw, because of their several superior aspects as Agriculture residual biomass; low lignin, high contents of carbohydrates. Barley straw consists of 39.78% cellulose (glucose), 22.56% hemicelluloses and 19.27% lignin. Pretreatment of barley straw using NaOH pretreatment solutions concentration with 2%, temperature $85^{\circ}C$ and reaction times 1 hr were investigates. $NH_4OH$ pretreatment condition was solutions concentration with 15%, temperature $60^{\circ}C$, and reaction times 24hr were investigates. Furthermore, enzymatic saccharification using cellulose at $50^{\circ}C$, pH 4.8, 180 rpm for conversion of cellulose contained in barley straw to monomeric sugar. The pretreatment of barley straw using NaOH and $NH_4OH$ can significantly improve enzymatic saccharification of barley straw by extract more lignin and increasing its accessibility to hydrolytic enzymes. The result showed NaOH pretreatment extracted yield of lignin was 24.15%. $NH_4OH$ pretreatment extracted yield of lignin was 29.09%. Shaccharification of barley straw pretreatment by NaOH for 72hr and pH 4.8 result in maximum glucose concentration 15.39g/L (58.40%) and by $NH_4OH$ for 72hr and pH 4.8 result in maximum glucose concentration 16.01g/L (64.78%).

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2004

Stage 1 sleep provides important information regarding interpretation of nocturnal polysomnography, particularly sleep onset. It is a short transition period from wakeful consciousness to sleep. Lack of prominent sleep events characterizing stage 1 sleep is a major obstacle in automatic sleep stage scoring. In this study, we attempted to utilize simultaneous EEC and EOG processing and analyses to detect stage 1 sleep automatically. Relative powers of the alpha waves and the theta waves were calculated from spectral estimation. Either the relative power of alpha waves less than 50％ or the relative power of theta waves more than 23％ was regarded as stage 1 sleep. SEM (slow eye movement) was defined as the duration of both eye movement ranging from 1.5 to 4 seconds and regarded also as stage 1 sleep. If one of these three criteria was met, the epoch was regarded as stage 1 sleep. Results f ere compared to the manual rating results done by two polysomnography experts. Total of 169 epochs was analyzed. Agreement rate for stage 1 sleep between automatic detection and manual scoring was 79.3％ and Cohen's Kappa was 0.586 (p＜0.01). A significant portion (32％) of automatically detected stage 1 sleep included SEM. Generally, digitally-scored sleep s1aging shows the accuracy up to 70％. Considering potential difficulties in stage 1 sleep scoring, the accuracy of 79.3％ in this study seems to be robust enough. Simultaneous analysis of EOG provides differential value to the present study from previous oneswhich mainly depended on EEG analysis. The issue of close relationship between SEM and stage 1 sleep raised by Kinnariet at. remains to be a valid one in this study.