• Resources Recycling
• /
• v.33 no.2
• /
• pp.16-23
• /
• 2024

The electrolysis for extracting magnesium from seawater or brine primarily involves recovery of magnesium via precipitation as the form of magnesium hydroxide. The technology is classified into cation-exchange membranes (CEM), anion-exchange (AEM) membranes, electrodialysis, and membraneless methods. Recent research has focused on enhancing the efficiency and selectivity of magnesium recovery from seawater or brine containing magnesium, with expectations of effective magnesium recovery even with normal seawater. In a future, the optimization of the selective and efficient recovery of magnesium and various valuable substances through long-term operation of scaled-up systems is crucial with enhancing economic and environmental viability. It is essential to realistically estimate operational costs considering the membrane's lifespan and replacement cycle. Also, detailed and practical process models should be developed based on monitoring data on various factors.

• Resources Recycling
• /
• v.26 no.4
• /
• pp.42-49
• /
• 2017

As a fundamental study for the separation of vanadium and tungsten from the leaching solution obtained from the soda roasting and water leaching process of spent SCR (Selective Catalytic Reduction) catalyst was carried out. The precipitation behaviors of vanadium and tungsten using the artificial solution (V: $1g{\cdot}L^{-1}$, W: $10g{\cdot}L^{-1}$) was investigated depending on temperature, NaOH concentration and the amount of $CaCl_2$ (aq.) added. V (aq.) was selectively precipitated at lower temperature than 293 K while tungsten also was precipitated at higher temperature. Precipitation rate of V and W was decreased by the increasing concentration of NaOH. On the other hand, excess Ca addition induced the increase of precipitation rate for V and W due to the formation of $Ca(OH)_2$ following the pH decline. The response surface methodology was employed to optimize the selective precipitation. Vanadium of 99.5% and tungsten of 0.0% was precipitated at $0.5mol{\cdot}L^{-1}$ of aqueous NaOH and 1 equivalent ratio of $CaCl_2$ at 293 K.

• KSBB Journal
• /
• v.5 no.2
• /
• pp.183-189
• /
• 1990

An efficient method has been developed for the purification of urokinase from 1, 000 liter batches of human urine. The procedure involved precipitation of urokinase with 2mM zinc chloride, resuspension of the precipitate with 0.1M EDTA/0.5M Glycine solution, and CM-Toyopearl and benzamidine-Sepharose column chromatography. The purified urokinase was fully active and possessed a specific activity of 1.07$\times$105IU/mg. The recoveries ranged from 42 to 65% in several preparations(mean value was 51%). And the urokinase purified by this process consisted of about 13% of single chain urokinase (pro-urokinase) as evaluated by SDS-polyacrylamide gel electrophoresis in reducing condition and by S-2444 amldolytic activity under plasmin treatment.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.649-656
• /
• 2002

In situ patterned zinc oxide thin films were prepared by precipitation of Zn(NO$_3$)$_2$ aqueous solution containing urea and by microcontact printing using Self-Assembled Monolayers(SAMs) on A1/SiO$_2$/Si substrates. The visible precipitation of Zn(OH)$_2$ that was formed in the Zn(NO$_3$)$_2$ aqueous solution containing urea was enhanced with an increase of the reaction temperature and the amount of urea. As the reaction time of Zn(NO$_3$)$_2$ with urea was prolonged, the thickness and grain size of Zn(OH)$_2$ thin layers were increased, respectively. The optimum precipitation condition was at 80$\^{C}$ for 1 h for the solution with the ratio of Zn(NO$_3$)$_2$ to urea of 1 : 8. Homogeneous ZnO thin films were fabricated by the heat treatment of 600$\^{C}$ for 1 h of Zn(OH)$_2$ precipitation on Al/SiO$_2$/Si substrate. This was available to the in-situ patterned ZnO thin films with uniform grain size. Hydrophobic SAM, Octadecylphosphonic Acid(OPA) and hydrophilic SAM, 2-Carboxyethylphosphonic Acid(CPA) were applied on the Al/SiO$_2$/Si substrate by microcontact printing method. In situ patterned ZnO thin film was successfully prepared by the heat treatment of Zn(OH)$_2$ precipitated on the surface of hydrophilic SAM, CPA.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.114.1-114.1
• /
• 2010

Fe계 촉매는 FT(Fischer-Tropsch) 합성반응에 매우 유망한 촉매로 주목받고 있으며, $280^{\circ}C$ 미만의 저온 FT 합성반응의 경우, 침전법이 Fe계 촉매의 가장 전형적인 제조방법으로 알려져 있다. Fe계 촉매에 첨가되는 조촉매로는 Cu, K, $SiO_2$ 등이 가장 대표적이며, 이 중에서 특히 구조 조촉매로 첨가되는 $SiO_2$는 Fe계 촉매의 기계적 강도를 향상시킬 뿐만 아니라, 촉매의 성능에도 크게 영향을 미치는 것으로 보고되고 있다. 본 연구에서는 침전법을 이용하여 저온 FT 합성반응용 Fe계 촉매를 제조하였고, 구조 조촉매로 첨가한 $SiO_2$의 원료물질에 따른 Fe계 촉매의 성능변화를 조사하였다. $SiO_2$의 원료물질로는 콜로이드 $SiO_2$와 분말 $SiO_2$를 이용하였으며, 분말 $SiO_2$를 이용한 촉매가 콜로이드 $SiO_2$를 이용한 촉매보다 다소 높은 CO 전환율 및 중질탄화수소 선택도를 나타내는 것을 확인하였다.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.36-43
• /
• 2018

In order to recycle waste nickel-cadmium batteries, cadmium was selectively removed by ion substitution reaction so that cadmium and nickel could be separated efficiently. The electrode powder obtained by crushing the electrode in the waste nickelcadmium battery was leached with sulfuric acid. The cadmium in the nickel-cadmium solution was precipitated with cadmium sulfide by the addition of sodium sulfide. Ion substitution experiments were carried out under various conditions. At the optimum condition with pH = -0.1 and $Na_2S/Cd=2.3$ at room temperature, the residual Cd in the solution was about 100 ppm, and most of it was precipitated with CdS.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.310-316
• /
• 1994

The phenolic substances contents of 45 plant foods in Korean diet were determined by different methods. Total phenolics contents by Folin-Denis method were $0.1{\sim}5.8%$ (dry matter basis), in which persimmon leaf, chestnut's inner skin, Chinese quince, walnut, sunflower seed and arrowroot exhibited the higher levels above 2%. Condensed tannin contents by vanillin method were $0{\sim}48%$, in which Chinese quince and chestnut's inner layer gave very high levels. Protein-precipitable phenolic substances ranged from 0.4% to 2.2%, in which chestnut's inner layer, walnut and Chinese quince had the highest content. The ability of phenolics to form precipitate was higher with pepsin and albumin than with trypsin. Among different phenolics content, total phenlolics correlated significantly with protein-precipitable phenolics (r=0.65) and condensed tannin (r=0.56). Chinese quince, chestnut's inner skin and sorghum showed a relatively lower degree of polymerization, as expressed by vanillin/FolinDenis ratio. Processed foods from buckwheat, acorn, mugwort and arrowroot showed a lower content of phenolic substances, suggesting a negligible adverse effect on the bioavailability of food proteins, if any.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.288-295
• /
• 2006

This study was conducted to examine the possibility of improvement effect in suppression of precipitation and nasty smell creation in Takju mash. First of all, gum shown to be lowest precipitation velocity was selected and this was applied to the fermentation of Takju mash for comparing with the control in terms of fermentation aspects and various qualities of Takju mash. Precipitation amount and precipitation velocity of suspension in Takju mash added with carrageenan was shown to be the lowest than that of others. Compared with the control, alcohol was highly generated in Takju mash added with carrageenan, especially between two and four days. Total acidity was shown to be highly increased until 2 days in Takju mash and thereafter to be slightly increased. Takju mash added with carrageenan was shown to be lower on the second stage than the control. Fusel oil produced from mash added with carrageenan was 0.046${\sim}$0.113${\mu}$l/ml and mash added with carrageenan generated less fusel oil than the control by 1.6${\sim}$3.2 fold. Yeast growth on the mash added with carrageenan was revealed to be helpful during fermentation periods. In general, sensory characteristics of Takju mash were shown to be more superior in mash added with carrageenan than in other samples. While nasty smell produced from a sample without gums was perceived after 2 days of Takju mash storage, nasty smell of Takju mash added with carrageenan was recognized after 6 days during storage. In conclusion, precipitation of suspension and nasty smell production in Takju mash were found to be suppressed by addition of carrageenan during Takju fermentation.

• Korean Journal of Clinical Laboratory Science
• /
• v.55 no.2
• /
• pp.82-92
• /
• 2023

Urine sediments are performed by a microscopic examination of centrifuged urine by medical technologists. This study examined different urine sediment preparation procedures. The 107 fresh urine specimens that tested positive from white blood cells (WBCs) and red blood cells (RBCs) in the urine dipstick test and the cobas u 701 analyzer, respectively, were selected for manual microscopy. This study evaluated an automated urine sediment analyzer and three manual microscopy methods for WBCs and RBCs. The methods were performed according to the test guidelines. The coefficients of determination between the cobas u 701 analyzer and the Korean Association of Quality Assurance for Clinical Laboratory (KAQACL) for WBCs and RBCs were r2=0.977 and r2=0.970, respectively. The concordance rates between the cobas u 701 analyzer and KAQACL for WBCs and RBCs were 74.8% and 77.6%, respectively. A good correlation and concordance with the automatic analyzer were shown when the specimens were prepared and examined using the KAQACL method. Consequently, the differences in the urine sediment preparation procedures affected the sediment concentrations, influencing the cell number per high power field (HPF).

• Korean Journal of Environmental Biology
• /
• v.25 no.2
• /
• pp.81-87
• /
• 2007

The removal of Microcystis aeruginosa and Chlorella zofingiensis by ceramic powder was investigated on the basis of both the particle size (under 0.05, 0.1, 1 mm) and the dosage (0.1, 1, $10\;g\;L^{-1}$) of the ceramic powder. The removal efficiencies of M. aeruginosa and C. zofingiensis were highest with a particle size of 0.05 mm and a dosage of $1\;g\;L^{-1}$ of the ceramic powder in laboratory experiment. $chlorophyll-{\alpha}$ concentrations decreased in both field and enclosure samples with a particle size of 0.05 mm and a dosage of $1\;g\;L^{-1}$ of ceramic powder, resulting in the removal efficiencies of 67 and 69%, respectively. Consequently, it was concluded that the ceramic powder could be used to control algal bloom by removing $chlorophyll-{\alpha}$ in eutrophic waters.