• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.51-54
• /
• 2006

최근 국내 중형급 조선소에서는 케미컬 탱커선을 주력선종으로 건조하고 있다. 하지만 선형개발 기술이 미비하여 저항감소 선형개발에 소홀하였다. 또한 기존 대형선박의 선형을 그대로 사용하기 때문에 추진효율이 떨어지고 많은 선수저항이 발생하여 선속에 큰 영향을 미치게 된다. 이에 본 연구에서는 CFD이론 해석을 통해 선형특성을 파악하고 저항감소 및 추진 효율 향상을 위해 실적선과 개발대상선의 모형시험을 통하여 선수저항 성능을 비교, 분석하여 저항감소 선수선형을 개발하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.12-12
• /
• 2017

연안어선의 선형적 특성에 대한 검토를 수행 하여 적합한 선형에 대한 정보를 제공한고자 한다. 또한 선수 벌브설치로 인한 저항성능과 내항성능에 대한 고찰을 통해 연안 어선의 선형설계 개선 사항에 대해서 제시하여 보고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.1-6
• /
• 1992

The finite difference simulation method for ship waves is introduced for hull form improvement. Numerical simulations were performed for a series of modified hull forms and the simulated results were used for the determination of the better hull forms. A 4,400 TEU container carrier which was designed and experimented in towing tank was chosen for the purpose. The calculation results are compared with those of model test, of simplified Neumann-kelvin problems and of Rankine source method. In this study, it is shown that the combination of the computer simulation by our method with the experiment provides one of the most economical and reliable procedures of hull form improvement and that the degree of accuracy of this method is so high that it can cope with very practical design purposes.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.42 no.1 s.143
• /
• pp.47-50
• /
• 2005

최근 Containership의 대형화가 진행됨에 따라 선수부의 선형 변화에 따른 선체의 구조부재 배치에 상당한 변화가 필요하게 되었다. 선수구조는 선형 변화 특히, Bow Flare Angle의 작은 변화에도 Bow Impact Pressure가 상당히 민감하게 반응함으로 외력에 의한 구조 배치 변경 및 추가적인 구조보강에 대한 여유를 갖고 설계를 진행할 필요성이 요구된다. 따라서, 본 논문에서는 선수부의 선형 및 구조 배치 변화에 따른 강도 평가를 구조해석을 통하여 구조 안정성을 검증하였으며, 구조 안정성 평가 절차 및 구조 해석 결과에 따른 구조 최적 배치 및 구조개선 사항을 간략히 정리하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.238-240
• /
• 2017

파랑 중 선수파의 영향을 줄이기 위해 도입된 Axe Bow선형은 파랑 중 항해 시 선수부에 과도한 Spray현상이 발생한다. 이를 억제하고자 선수 부가물이 도입되었으나, 수치해석적 연구가 필요할 것으로 판단하였다. 선수 부가물은 Spray rail에서 착안하였으며, 구현이 쉽고 설계 파라미터를 제시 할 수 있는 Barge형상으로 적용하였다. 본 연구에서는 선수 부가물의 길이 변화에 따른 Axe Bow 선형의 Spray 억제를 수치해석적으로 고찰하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.246-252
• /
• 2016

In this study, conceptual design of the fore-body hull form of catamaran type dredging vessel was performed that can effectively remove the contaminated sediments in coastal seabed. The hull form was simpled for the easy hull construction and the resistance performance was investigated to find out the effect of hull form parameters between variation of waterline and angle of entrance, etc. The relation between resistance performance and characteristics of free surface flows according to variation of bow forms was investigated by model testing in the circulating water channel and using Ansys CFX. The improvement of ship resistance performance to the wave resistance decrease due to improved wave pattern has been verified according to move the stem and the volume of the shoulder to the fore part of the vessel.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.923-929
• /
• 2018

In this study, we analyzed the resistance performance and running attitude of a catamaran by numerical analysis with a conventional bow, which is generally applied, and a reverse, protruding bow. The shape of the reverse bow was compared through numerical analysis and model tests. The reverse bow shape showed an improved wave pattern by shifting the generation position of the forward divergent wave to the aft in comparison with a conventional bow shape. This effect was found to be effective in determining resistance and stable running attitude. The hull resistance improved by about 2.95 %. The comparative numerical analysis and model test for the reverse bow shape completed in this study should be useful for future hull design application.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.481-486
• /
• 2013

In this study, a commercial seakeeping program Seakeeper, integrated into Maxsurf, which is based on the linear strip theory was employed to compare the effect of bulbous bow (with/without) on motion response characteristics in a 18-meter catamaran. The seakeeping analyses were conducted at several Beaufort wind conditions such as scale No. 3 ($\bar{T}=2.98s$, $H_{1/3}$ =0.6m), No. 4 ($\bar{T}=3.85s$, $H_{1/3}$ =1m) and No. 5 ($\bar{T}=5.44$, $H_{1/3}$ =2m) based on ITTC wave spectrum. Pitch motion response spectrum was calculated at Head sea, Head & bow sea and Beam sea as encounter angles. Hull form of a catamaran with bulb showed the maximum 20% decrease of pitch motion response as compared to that of hull form without bulb.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.50-62
• /
• 1994

This paper presents the results of a comparative analysis of the model test results to investigate the effect of bulbous bow installed on a large full form ship to the ship resistance performance. Seven parameters related to the shape of bulbous bow were selected and varied systematically to inquire their effects experimentally. A total number of twenty-three ship models with different bulbous bow were manufactured, and resistance tests. flow visualization test, and wave profile measurement were carried out for each model. For the comparative analysis between the various bulb forms and their model test results, bulbous bow forms are classified into nine groups according to their form characteristics. From the analysis of the trend of the resistance components, it was verified that form resistance has dominant effect on the total resistance of a slow full form ship. The model test and its statistical analysis showed that the direction of streamlines around bulbous bow has close relationship with resistance components. especially with form resistance

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.1-7
• /
• 1998

Hull form development of the medium size high speed fishery patrol ship was carried out in the CWC at Chosun university. Same size of 15 knots class fishery patrol ship was selected as a parent form(Model number : CU-015), and modified fore and after body hull form under the slightly lengthened lo be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb and sharp entrance angle were adapted. Meanwhile, to enlarge the engine room space keeping high resistance and sea-keeping Performance, U-type stern hull form was developed. Although the hull form was highly constrained in being limited to modification of a parent hull form significant wave resistance improvement was made.