• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.434-439
• /
• 1995

본 논문에서는 선삭가공을 부품에 대한 가공 특징형상 추출 알고리즘을 개발하였다. 면저, 설계 특징형상과 가공 특징형상 을 효율적으로 나타내기 위한 데이터 구조를 설계하고, 선삭가공에 사용되는 가공 특징형상의 특성을 검토하였다. 이러한 특성 을 이용하여 주사선(Scan Line)과의 교점으로부터 가공 특징형상을 이루는 요소를 검색하고, 검색된 구성요소를 이용하여 가공 특정형상을 구성하였다. 본 연구에서 개발된 알고리즘은 기존에 사용되어 왔던 패턴비교 방법에서 주어지 패턴이외의 특징 형상을 추출하기가 어렵고 계산 시간이 많이 걸리는 단점을 극복하였다. 또한 기존의 방법으로는 해결되기 어럽던 가공 특징 형상 의 간섭의 검출에서 효율적으로 적용됨을 확인하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.9-15
• /
• 2011

Any relative deformation between the cutting tool and the workpiece at machining point results directly in geometric and dimensional errors. The sources of relative deformations between the cutting tool and the workpiece at the contact point may be due to vibration, thermal deformation and cutting forces. In this paper, geometric error prediction of workpiece in turning has been investigated. To reach this goal, turning experiments are carried out according to selected cutting conditions. The variable cutting conditions are cutting speed, depth of cut and feed rate. The results will be useful as a guidance to select cutting conditions to improve the geometrical accuracy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2430-2435
• /
• 2015

In order to achieve high flexibility in manufacture, analysis of chip's shape is one of the most important problems. This paper describes the change of machining characteristics in workpiece materials depending on turning clearance angle. The experiments start from choosing three workpiece materials that are SM45C(machine structural carbon steel), STS303(stainless steel), SCM415 (chrome-molybdenum steel). Then, the experiments show specifically how features of selected materials changed when they were processed with diverse machining depths and with feed rate starting from fixed rotational speed. Especially, the experiments were also analyzed in chip's shape and wear of insert tip. In conclusion, these experiments show that chip's shape was changed by quality of the materials, depth of cut, and conveying speed. When machining feedrate and machining depth were 0.10mm/rev and 0.3mm respectively, workpiece materials showed the best shapes, not categorizing quality of the materials and machining characteristics.

• Journal of the KSME
• /
• v.26 no.3
• /
• pp.195-199
• /
• 1986

지금까지의 해설과 같이, 3-조오 척의 조오- 공작물사이의 접촉상태는 가공물의 정도와 진선도 및 채터 안정성에 직접적인 영향을 주고 있다. 일반적으로 긴 접촉길이를 갖는 완전접촉상티는 선접촉이나 중심선접촉상태보다도 2∼4배 가량의 가공정도나 진원도 향상을 가져오며, 채터 안 정성에 있어서도 현저한 진전을 나타낸다. 따라서 선삭시에 클램핑 접촉상태는 가공물정도나 진원도를 해석하는 과정에서 중요한 인자로서 취급되어야 할 것이며, 구체적인 해석적 과정을 갖지 않고서 원활한 가공결과에 접근하기 위해서는 완전접촉의 상태로서 비교적 접촉 길이를 공작물 반경에 가깝도록 하는 것이 바람직하다고 볼 수 있다.

• Clean Technology
• /
• v.12 no.3
• /
• pp.182-189
• /
• 2006

In this study, high speed machining is evaluated with regard to economical and environmental effects. Considering environmental loads, machining costs are analyzed with the mathematical models of machining economics and cutting fluid loss. Data from the tool life experiments of high speed milling and turning are used for the analysis. The analysis of high speed milling shows that the machining cost decreases as increasing the cutting speed. In turning process, the cooling method using cutting fluid shows the minimum machining cost. Considering both machining and environmental costs, cooling method using cold air is superior to other methods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.48-53
• /
• 2009

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions are tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.1-8
• /
• 2011

Recently, super heat-resistant alloy Inconel 600 come into spotlight as the material of airplane parts but this material causes lots of problems that is, reduction of machinability and attritious wear and breakage of cutting tool during turning processing due to high temperature strength and cohesion between tool material and Inconel 600. Therefore, in this study, it was purposed to determine tool material kind and to select of proper cutting range when turning process was carried out for Inconel 600. In order to these Purpose, coated carbide tool and ceramic tool was used in this experiment and the machinability of Inconel 600 was investigated from perspective of the cutting force, chipping and wear of tool and deposition phenomenon of chip.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.118-124
• /
• 2012

In this study, we turning mold steel (SKD61) using whisker reinforced ceramic tool (WA1) to get affected factor to surface roughness and regression equation. For this study, we adapt system of experiments. Results are follows; From the analysis of variance, it was found that affected factor to surface roughness was feed rate, cutting speed, depth of cut in order. From multi-regression analysis, we calculated regression equation and the coefficient of determination($R^2$). $R^2$ was 0.978 and It means regression equation is significant. Regression equation means if feed rate increase 0.039mm/rev, surface roughness will increase $0.8391{\mu}m$, if cutting speed increase 50m/min, surface roughness will decrease $0.034{\mu}m$, if depth of cut increase 0.1mm, surface roughness will increase $0.0203{\mu}m$. From the experimental verification, it was confirmed that surface roughness was predictable by system of experiments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.4
• /
• pp.87-92
• /
• 2009

쇽옵서버 피스톤로드(shock absorber piston rod)는 자동차의 충격과 진동의 흡수에 작용하는 자동차 현가장치(suspension equipment)부품의 일종이다. 피스톤로드는 자동차 충격흡수에 매우 밀접한 영향을 주기 때문에 제조에 있어서 고도의 정밀도와 표면 매끄러움이 요구된다. 피스톤로드의 제조공정은 선삭, 홈가공, 밀링, 전조 등 여러 공정으로 구성되는데, 여기서 품질불량에 가장 크게 영향을 주는 공정은 선삭공정(lathing process)이다. 이는 선삭공정의 가공공구(insert component)가 주원인으로서 반복되는 가공으로 인한 공구의 마모(abrasion)나 파손(breakage)이 주요 원인으로 지적되고 있다. 따라서 가공 데이터를 수집 분석하여 공구의 교체시기를 파악한다거나 가공 부품의 측정 데이터가 관리도 상하한선 내에 있는지 등 가공 공정 전반에 대한 체계적인 공정관리 시스템 개발이 요구된다. 본 연구에서는 자동차 쇽업서버 피스톤로드 제조공정의 가공 정보를 체계적으로 수집하여 관리하고 분석하는 자동차 쇽업서버 피스톤로드 제조공정에 대한 공정관리시스템을 개발하는 것이 목적이다. 개발결과 피스톤 로드의 측정 치수 변화 및 불량발생을 측정, 감지할 수 있었으며, 본 시스템을 통해 가공공구의 치수오차를 보정(compensation)하고 공정의 불량발생을 조기에 방지 함으로써 불량률은 1/5로 경감하고 작업자 수도 1/2로 감소시킬 수 있었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.49-54
• /
• 2004

In order to evaluate the stability of chatter vibration in turning precess, the micro-positioning cutting test with artificial tool vibration by piezoelectric actuation were carried out. In experiment, the phase lags between cutting forces and chip thickness variations were measured, and the dimensionless penetration-rate coefficient（$\overline{K^*}$） which is the most important parameter on the stability for chatter vibration was calculated. The results show that$\overline{K^*}$ can be applicable to the stability criterion for regenerative chatter vibration.