References
- Hwang, K. C., Yoon, J. H., Choi, J. H. and Kim, S. C., "Machinability Characteristics of lnconel 690 Alloys," KSMTE Spring Conference, Vol. 11, pp. 87-94, 2002.
- Kim, S. W., Park, H. B., Lee, D. W. and Kim, J. S., "Evaluation on High-Speed Machining of Incone1 718," KSPE, Spring Conference, pp. 182-185, 1998.
- Rao, G. A., Srinivas, M. and Sarma, D. S., "Effect of Thermomechanical Working on the Microstructure and Mechanical Properties of Hot Isostatically Pressed Superally Incone1 718," Materails Science and Engineering A 383, pp. 201-212, 2004. https://doi.org/10.1016/j.msea.2004.05.062
- Adrian S., Richard C. D. and David K. A., "Tool Life when High Speed Mall Nose end Milling Incone1 718," Journal of Materials Processing Technology 118, pp. 29-35, 2001. https://doi.org/10.1016/S0924-0136(01)00855-X
- Choi, H. S., Ko, D. C. and Kim, B. M., "Variation of Microstructures and Mechanical Properties of Hot Heading Process of Super Heat Resisting Alloy Inconel 718," KSME, Spring Conference pp. 362-367, 2007.
- Kwon, H. W., Kang, I. S., Kim, J. S., Moon, S. L. and Kim, K. T., "Machinability Evaluation of Incone1 718 by Characteristics Analysis of Tool Life and Surface Roughness," KSMPE, Spring Conference, pp. 219-213, 2008.
- Choi, J. H., "Improvement of Surface Roughness by the Cutting Speed Control for Turning Operation," Journal of the The Korean Society of Manufacturing Process Engineers, Vol. 7, No. 2, pp. 23-30, 2008.
- Chung, E. S. and Suk, N, G., "A Study on the Dynamic Component of Cutting Force in Turning[I] - Recognition of Chip Flow by the Dynamic Cutting Force Component," Korean Society for Precision, Vol. 5, No. 1, pp. 84-93, 1982.
- Ha, S. K. and Lee G. J., "A Study on the Effects of Cutting Resistance and Surface Roughness in Turning," KSMTE, Vol. 8, No. 5, pp. 47-53, 1999.
- Lim, J. S., Chung, W. J. and Lee, C. M., "Selection of Bearing Position for Improving Static and Dynamic Stiffness of 40,000rpm High-speed Spindle," KSMPE, Vol. 8 No. 1, pp. 10-17, 2003.
- Jang, S. M. and Cho, M. W., "A Study on the Effect of Cutting Parameters in Face Turning Based on the Taguchi Method," The Korean Society of Machine Tool Engineers, Spring Conference, pp. 111-116, 2003.
- Lim, p. and Yang, G. E., "Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 5, No. 4, pp. 59-64, 2006.