• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.13-25
• /
• 1997

전 세계의 대형 저속 디젤 엔진을 설계.제작하는 회사는 1980년대에 들어오면서 MAN - B&W, SULZER, MITSUBISHI의 3파전 양상을 띠고 있으며, 세계 시장점유율에서는 MAN - B&W가 50%이상을 차지하고 있다. 한국은 현재 한국중공업, 현대중공업, 쌍용중공업 및 삼성중공업에서 대형 저속 디젤 엔진을 생산하고 있다. 국내에서 생산되고 있는 대형 저속 디젤 엔진은 대부분이 MAN - B&W형이고 SULZER형이 약 20%를 차지하고 있다. 기술력은 위의 3사에 거의 의존하고 있으며, 설계보다는 생산에 치중하고 있는 실정이다. 선박용 엔진 구조물은 베드 플레이드(bed plate), 실린더 프레임(cylinder frame), 프레임 박스(frame box)등이 주 스테이 볼트(long stay bolt)에 의하여 체결되어 한 개의 대형 수직 구조물을 이루고 있으며, 프레임 박스의 안내면(guide plate)과 베드 플레이트의 베어링 지지부(bearing support)등은 엔진의 폭발력과 선박의 추진력을 직접적으로 받으므로 구조적 결함과 하자 보수의 문제들이 발생하고 있다. 이와 같은 사용상 및 제작상의 제문제를 해결하기 위해서는 유한요소 구조 해석 능력을 자체 보유하여 구조 설계상의 문제점을 분석하고 엔진 구조물의 취약 부위를 집중 검토하여야하며, 이를 통해 선박의 운항 중에 일어날 수 있는 사고를 미연에 방지할 수 있다. 그러나 국내에서는 이러한 대형 엔진 구조물의 설계/해석 기술이 거의 없고 구조적 문제점이 발생할 경우에는 모든 사항을 설계사(licensor)에 전적으로 의존하고 있는 실정이다. 한편, 설계 기술을 보유하고 있는 MAN - B&W, NEW SULZER DIESEL사 등은 정밀 구조 해석을 통하여 기존 엔진 구조물에 대한 안전성 및 신뢰성을 높임과 동시에 신 모델 개발에 박차를 가하고 있으나, 기술 이전은 회피하고 있어 대형 엔진 구조물에 대한 구조 해석 기술의 개발이 시급하다고 할 수 있다. 본 해설에서는 CAD/CAE(Computer Aided Design/Computer Aided Engineering)를 이용하여 위에서 제시된 대형 엔진 구조물의 구조해석 절차와 방법에 대해 간략히 설명하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.585-594
• /
• 2017

Drones, which were first developed for the military use, have been widely applied in various industrial fields through the rapid development of element technology. Following this trend, the marine industry has started to utilize drones for maintenance and inspection purposes, especially, in Europe. To extend the use of drones in the marine industry, this paper first discusses the necessity of drones for the marine use by presenting problems related to maintenance and inspection works on ships and offshore plants. In addition, the technical levels of advanced countries where drones have been commercialized already in the marine industry are mentioned. Furthermore, technical challenges that must be solved are explained in preparation for a drone era in the marine industry. Lastly, the potential growth of the drone market in the marine industry is considered.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.1
• /
• pp.45-52
• /
• 2010

A model of the propulsion mechanism, I, II, III was based on a two-dimensional model of the Weis-Fogh mechanism and consisted of one or two wings in a square channel. The sailing and vibration performance characteristics of model ships were tested to compare with each other. we took results as follow. Thrust of propulsion model, I and III was increased by 31% and 43%, the speed of model ship by 20% and 23%, When compared to model II in same condition. The thrust improvement using the elastic spring wing was effective not only on all models but also in the real ship. The maximum amplitude and RMS were largest at the opening angle ${\alpha}=15^{\circ}$ and smallest at ${\alpha}=30^{\circ}$ on the vibration of model ship. The thrust of propulsion model III with opening angle ${\alpha}=30^{\circ}$, phase ${\Delta}T=0^{\circ}$ was large, but the amplitude of vibration was small relatively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.85-92
• /
• 2017

Recently, electric propulsion systems are used for unmanned surface vehicle, fish finder boat, etc. Some of these propulsion systems can be constructed of two electric motors and propellers for advanced impellent force. In this case, the speed difference generated between two propellers, namely, the synchronous error has a bad influence on the energy efficiency and course error. In this study, a synchronous control system is designed to restrain synchronous error caused by disturbance and mismatched dynamic characteristics. The control system is composed of the reference model, pre-filters, speed controllers, and synchronous controllers. The reference model is used for calculating the decoupled synchronous error and control input for each propulsion system. The pre-filters and speed controllers are designed in order that the propulsion system may follow the reference signal without overshoot and input saturation. And the synchronous controllers are designed from the viewpoint of stable and quick synchronization through root locus mothed approach. Finally, the simulation results show that the designed control system is effective for the disturbance.

• Journal of Korea Port Economic Association
• /
• v.36 no.4
• /
• pp.31-52
• /
• 2020

The increase in the number of ships entering and leaving the port and the creation of various cargo volumes can promote local economy and lead to regional development, attracting businesses, and influx of local residents. The port area of Dangjin consists of the limited cargo and most private docks, making it increasingly weak in meeting the local economic development and the expectations of local residents. Therefore, in order to promote regional development and revitalize the local economy, and to reduce the sense of alienation of local residents, it is necessary to make it easier to access and water to ports through the development of all areas of Eumseompo-gu, and to make active changes in the marine and port logistics environment. As seen through various cases of port development at home and abroad and the redevelopment of the ports at Gohyeon Port in Geoje, Dangjin Port should be able to quickly demonstrate the development of the Dangjin Port area and improve the quality of life for the residents of the metropolitan area. This is the time when the government's drive is highly requested.