• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.112-119
• /
• 2003

제한수역에서 바람과 조류와 같은 외력을 받으며 항행하는 선박들 사이에는 대양에서 항행할 때와는 달리 상호간에 여러 가지 작용이 일어나면서 선박의 안전이 위협받는 수가 많다. 본 연구에서는 협수로와 같은 제한수역에서, 해난사고를 피하기 위해 요구되어지는 선박들간의 적절한 안전속도 및 안전거리를 제안하기 위해 선장비, 속도비, 풍향, 풍속, 유향 및 유속 등을 파라메타로 해서 조종운동 시뮬레이션 계산을 행하였다. 시뮬레이션 계산 결과, 두 선박 간의 상호 영향은 대형선박에 비해서 소형선박에 보다 크게 작용하는 것으로 나타났고, 속도비 1.2 의 경우가 속도비 0.6, 1.5의 경우보다 매우 크게 나타났다. 한편, 외력하에서 항행하는 두 선박에 있어서, 고속 선박에 비해서 저속 선박에 미치는 외력의 영향은 상당히 크게 작용하기 때문에 조선할 때, 이 점에 유의하여 항행해야 함을 알 수 있었다.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.673-678
• /
• 2005

In order to improve the safety of ship berthing and the efficiency of berth operation in the harbour, the berthing energy acting on a ship in berthing maneuver need to be estimated properly. The berthing energy is used as one of the criteria to determine the maximum permissible load q{ fender as well as important factors to establish the berthing speed and the required power of tug-boat for pilot and ship operator. Some problems of berthing energy are discussed on the basis of the hydrodynamic aspects. Then, series calculations of berthing energy are carried out considering the effect of water depth on added mass and the ship shape for container series from 1,600TEU to 12,000TEU.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.8-10
• /
• 1993

선박에너지 개발을 위한 미래의 유력한 추진체로서 초전도 자력장을 이용한 선박을 들 수 있는데 이와 같은 경우에는 실험을 하기에는 비용이 엄청나게 소요되고 설비 자체가 복잡하기 때문에 CFD를 이용해서 초기 계\ulcorner을 구상하고 선체 주위의 유동장의 제어 및 기초 설계를 하여야 할 것이다. CFD계산을 통해 일반적으로 얻을 수 있는 것은 -압력 분포 -자유 표면 파고 -유속 분포 -유선 추적 -선체 표면의 응력 분포 -한계 유선 분포 -선미 와류 생성 과정 -선체 저항 계산 등으로 선형 개발에 필요한 기본 자료들이다. 여기서 CFD의 유용가치를 강조할 수 있는데 위의 많은 데이터를 실험을 통해서 얻으려면 막대한 경비와 노력이 투입되어야 한다. 또한 현재의 실험 시설로는 정량적으로 측정할 수 없는 부분도 일부 있다. CFD의 경우는 그러한 어려움은 없으나 꼭 필요한 것이 수치계산의 검증이다. 계산 결과의 유효성(validity)을 검증해야 한다는 의미이다. 계산은 실험을 통하여 반드시 비교 검토가 이루어져야 하며 이의 수단으로 선박 분 야에서는 Wigley 모형이나 Series 60와 같은 것들이 사용되고 잇다. 당 연구소의 저항추진연구 실에서는 CFD의 연구가 수년 전부터 소수의 인원을 중심으로 이루어져 왔다. 이와 관련하여 대표적인 몇 가지만 소개하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.796-802
• /
• 2018

The effects of inner liquid sloshing on vessel motions are a well-known factor. It was investigated experimentally and numerically. In this regard, the study of many efforts to reduce natural phenomena of vessel motions by adopting special devices especially for roll motions. Among many devices, inserting baffles in the inner liquid tank is very common. In this study, one investigated the vessel motions with inner sloshing tanks with baffles inside. For the numerical simulation, one employed a dynamically coupled program between boundary-element-method-based vessel motion analysis program and a particle-based computational fluid dynamics program. Comparing corresponding experimental results validated the dynamically coupled program. The validated coupled program was used to simulate vessel motions, including sloshing effects with various lengths of inner baffles. The simulation results show that not only the filling ratio of inner liquid, but also the length of clearance due to baffles influenced the vessel motions. The significant point of this study was that the natural frequency of vessel motions can be maintained irrespective of the amount of filling ratio through adjustment of the clearance. In a future study, the effects of various numbers of baffles with various clearances would be conducted to percuss the possibility of vessel motion control with inner liquid sloshing effects.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.258-264
• /
• 2010

Most of fluid systems, such as P&ID in ships, power plants, and chemical plants, consist of various components. The components such as bends, tees, sudden-expansions, sudden-contractions, and orifices contribute to overall pressure loss of the system. The local pressure losses across such components are determined using a pressure loss coefficient, k-factor, in lumped parameter models. In many engineering problems Idelchik's k-factor models have been used to estimate them. The present work compares the k-factor based on CFD calculation against Idelchik's model in order to confirm whether a commercial CFD package can be used for pressure loss coefficient estimation of complex geometries. The results show that RSM is the best appropriate for evaluating pressure loss coefficient. Commercial CFD package can be used as a tool evaluating k-factor even though the accuracy is influenced by a turbulence model.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.6
• /
• pp.29-39
• /
• 2001

본 논문에서는 차세대 고속선에 적합한 선형의 하나로 거론되고 있는 삼동선의 개발 현황을 살펴보고, 실선으로의 가능성을 파악하기 위하여 적용 대상선을 2,500톤급 삼동형 함정으로 설정하여 개념설계를 수행한 결과를 보이고자 한다. 함정의 설계조건과 요구사항에 적합하도록 삼동선의 장점을 최대한 반영하여 초기 개념 설계를 수행하였으며, 이로부터 도출된 삼동선형의 유체역학적인 성능검토를 위해 저항추진, 내항 및 조종성능에 대한 연구를 수행하고 그 결과를 유사 단동선과 비교, 검토하였다. 연구결과의 가시화를 위하여 최종적으로 3차원 컴퓨터 그래픽 모델링하고, 실선의 1/100 축적모형을 제작하여 설계결과를 표현하였다.

• Defense and Technology
• /
• no.9 s.175
• /
• pp.34-39
• /
• 1993

조선기술은 기계공학, 구조해석학, 유체역학, 재료공학 및 전기, 전자공학 등을 총망라하는 종합 공학으로서, 각 부분 전문기술이 균등하게 발전해야 비로소 향상된 고부가, 고품질 함정의 개발과 건조가 가능합니다 소위 첨단기술로 불려지는 자동화, 고지능화 및 고신뢰도 기술의 도입으로 선박의 고속화, 경량화, 정숙화, 성력화 및 은밀화와 더불어 제한된 공간에서 승조원의 쾌적한 생활 향상을 위한, 인체공학적인 측면에서도 개선될 수 있도록 연국 개발되고 있습니다

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.1
• /
• pp.23-33
• /
• 2019

Unmanned Surface Vehicle (USV) is being developed to do maritime survey and maritime surveillance at Korea Research Institute of Ships & Ocean engineering (KRISO). The goal is that USV should be operated at the maximum speed of 45 knots and it should be operated at sea state 4. Therefore the planing hull of USV should be excellent in resistance performance and manoeuvring performance. It is needed to check its performance using Experimental Fluid Dynamics (EFD), Computational Fluid Dynamics (CFD) or analytic method before designing the hull. In this study, resistance performance was analyzed by EFD and CFD. EFD with heave and pitch was performed at high speed towing system in Seoul National University. CFD was performed using SNUFOAM based on openFOAM with dynamic mesh to calculate running attitudes. The results of CFD were compared with EFD results. The results of CFD were resistance, running attitudes and wave height. The flow distribution and pressure distribution were also analyzed. The results of numerical resistance was under estimated than EFD. Even though the results of CFD have a slight limitation, it can be successfully used to estimate the resistance performance of planing hull. In addition it can be used as a supplement for EFD results.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.247-255
• /
• 2019

In this study, to predict the noise of a submarine propeller which is going to become bigger and faster, the non - cavitating propeller noise was predicted based on the numerical analysis which considering the interaction of the hull - appendages - propeller. In order to predict the radiated noise of the propeller, the flow field for the entire region of hull-appendages-propeller was computed by CFD (Computational Fluid Dynamics). And the noise for the thickness noise and the load noise was numerically predicted using FW-H (Ffwocs Williams-Hawkings) acoustic analogy. Numerical noise prediction results were verified by model tests and showed good agreement with the measurement results in predicting total noise level and low frequency noise.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.345-354
• /
• 2022

It is easy for a ship passing through confined waters to be exposed in dangers of collisions and grounding due to different hydrodynamic responses. Since marine accidents can cause significant impacts on environments, global economy, and human lives, it is necessary to study the effect of shallow water on hydrodynamic performance of a ship. In this paper, the effect of water depth on resistance performance was investigated using CFD analysis as an initial study for improving navigational safety of a large container ship under confined waters. After a CFD set-up for deep water condition was validated and verified by comparing CFD analysis with model test results, CFD calculations according to ship speed and water depth were conducted. The features were investigated in terms of tendency and physical knowledge related to resistance performance. The increase of resistance due to shallow water effect was reviewed with empirical formula suggested from SWABE JIP. Speed loss due to shallow water effect was additionally reviewed from estimated delivered power according to ship speed and water depth.