• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.162-163
• /
• 2021

그래핀수지로 기존에 황동(Ni-Al-Bronze) 프로펠러 대체 가능 제품의로 고가의 황동을 그래핀수지 특히 재생 플라스틱 활용으로 저가로 공급 가능하다. 또한, 재활용이 가능한 친환경 프로펠러임, 가벼운 소재를 이용하여 연료 효율 증대, 연료 효율을 향상시켜 연안해운 저탄소 실현, 마찰저항을 최소화하여 선박의 추진성능 개선, 해양생물 부착 방지(방오기능)를 통한 프로펠러 수명연장 기대, 프로펠러 검사 및보수 유지비용 절약 기대, 향후 폐기물에 그래핀을 혼합한 재생 자재로 활용 가능이 크다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.117-127
• /
• 2001

On this research, recognizing that ship inspection is closely related in improving ship safety', the importance of active quality managements of ship inspection has been notified. This paper aims to explore effective ways to improve inspection service and develop customer-centered inspection administration, by carrying out a case study on K Company. The methods applied for this research project are as follows, 1) sector-based examination of the existence of the ISO 9001 system; 2) evaluation of the operation of the system; 3) conduction of a survey questionnaire with the participation of all staff and inspection companies to analyze customer satisfaction of their inspection service, and 4) statistical analysis of the data collected from the survey questionnaire.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.497-504
• /
• 2023

In this study, Selective catalytic reduction (SCR) + Diesel particulate filter (DPF) system was installed on a ship with a low-speed engine to conduct the on-board test. The target ship (2,881 gross tons, rated power 1,470 kW@240 rpm ×1) is a general cargo ship sailing in the coastal area. Drawing development, approvals and temporary survey of the ship were performed for the installation of the after-treatment system. For performance evaluation, the gaseous emission analyzer was used according to the NOx technical code and ISO-8178 method of measurement. The particulate matter analyzer used a smoke meter to measure black carbon, as discussed by the International Maritime Organization (IMO). Tests were conducted using MGO (0.043%) and LSFO (0.42%) fuels according to the sulfur content. The test conditions were selected by considering the engine rpm (130, 160 and 180). Gaseous emission and particulate matter (smoke) were measured according to the test conditions to confirm the reduction efficiency of the after treatment system. The results of NOx emission and particulate matter (smoke) revealed that reduction efficiency was more than 90%. The exhaust pressure met the allowable back pressure (less than 50 mbar). This study confirms the importance of the on-board test and the potential of SCR + DPF systems as a response technology for reducing nitrogen oxides and particulate matter.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.119-125
• /
• 2007

In recent days, the consumption of stainless steel in the propulsion shafting systems for small-medium class vessel is increased due to its high corrosion protection with wear resistant properties. Unfortunately the small and medium class vessel that operated in the west-south sea area of Korean peninsula experienced heavy wear down due to the role of mud. In the event of wear or broken down, the propeller shaft must be replaced by new one, but the new shaft is very expensive and time-consuming for order made supply. In this case, the methods of built up for wear and broken shaft by welding is one of the most effective cases. In this study, the built up welding for austenitic stainless steel shaft has been accomplished by various pre-surface treatment, welding methods, post heattreatment and inspection. The results confirmed that the built-up welding was one of the effective methods for stainless steel shafting.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.67-72
• /
• 2017

This study developed an electric power propulsion personal watercraft by combining a battery and an electric system from the domestic automobile industry with water motorcycle from marine leisure industry in a convergence of technology. It also developed a safety inspection plan and type approval standard for personal watercraft that use electric power propulsion. For the registration and production of the electric power PWC (Personal Watercraft), a safety inspection standard (draft) and type approval standard (draft) have been established. PWC that use this electric power propulsion certification standard have been divided into two categories according to the use of gasoline engines as related to the ship's electrical system. The contents of these safety inspections standards is divided into 7 categories, and their purpose is to confirm the facilities used for the safe operation of PWC. Type approval is divided into 7 categories and is intended to ensure the safe production of PWC. This is basic data can be used to establish criteria for safety inspection and type approval of electric power propulsion vessels and to guide the production of the environmentally friendly PWC in Korea.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.671-678
• /
• 2009

Recently, there have been some researches in the equipment fault detection based on shock and vibration information. Most research of them is based on shock and vibration monitoring to determine the equipment fault or not. Different with engine fault detection based on shock and vibration information we focus on detection of engine for boat and system control. First, it use the duplicated-checking method for shock and vibration information to determine the engine fault or not. If there is a fault happened, we use the integral to determine the error engine shock wave width and detect the fault area. On the other hand, we use the engine trend analysis and standard of safety engine to implement the shock and vibration information database. Our simulation results show that the probability of engine fault determination is 98% and the probability of engine fault detection is 72%

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.69-77
• /
• 2000

This study was a part of FSA study which was initiated by IMO and was applied to hatchway watertight integrity of bulk carriers. Hazards which were involved in high risk level were identified as follows. Ship Operation out of Design Criteria(Hatch Coaming Damage) and Poor Maintenance & Inspection(Securing Arrangement Damage). The potential risk was calculated by risk analysis and risk control option was made to reduce potential risk. The potential risk was about U$60,000/ship-year and could be reduced to about U$30,000/ship-year by applying RCO 1(Advanced system directly related to Hatchway Security). In addition, effectiveness of RCOs was shown by cost benefit assessment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.17-27
• /
• 2016

The need for storage and transportation facilities of liquefied natural gas have increased significantly because of global environmental regulations and recent shale gas innovation in North America. There is severe competition between Korea, Japan, and China for receiving manufacturing orders of LNG carriers or LNG storage tanks. Rationalization of the welding process used in the manufacturing of LNG facilities plays an important role in the above competition. This review paper presents the current global status and tendency for the development of latest welding technologies for LNG storage and transportation facilities. This article intends to present materials for raising the domestic competitive power for receiving manufacturing orders of LNG facilities.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.79-81
• /
• 2015

해사노동협약이 2013년 8월 20일부로 발효되었다. 해사노동협약의 여러 규정들 중에 최소휴식시간 규정은 선원의 근로조건과 직결되는 사항이기도 하며 선주의 비용적 측면에서도 중요한 사항이다. 본 연구에서는 국내에서 최소휴식시간 규정이 어떻게 적용되고 있는지를 실제 선박에 승선하고 있는 선원들을 대상으로 설문을 시행하여 208명의 응답을 분석하였다. 응답자의 80% 이상이 국제항해에 종사하는 선원이었으며 설문결과 73% 이상의 선원이 해사노동협약에 대한 이해도를 어느 정도 가지고 있었다. 그러나 70% 정도의 응답자가 최소휴식시간 규정이 준수되지 않고 있다고 응답하였으며 그러한 이유로 바쁜 선박일정과 이로인하 과도한 업무부하를 지적하였다. 그럼에도 응답자의 90% 이상이 최소휴식시간규정 미 준수에 대한 보상은 거의 이루어지고 있지 않다고 응답고 근무시간도 실제로 작성하기 보다는 관련 검사를 통과하기 위해서 실제와는 다르게 축소하여 작성하는 경우가 90% 이상 이었다. 이러한 문제점들에 대한 해결하는 방법으로 해사노동협약에서 언급하고 있는 선원불만 고충처리 제도를 활용한 경우는 4%에 불과 했다. 전체적으로 국내 선원들은 최소휴식시간과 관련된 규정과 이의 적용에 대해서 매우 부정적인 생각을 가지고 있는 상황이었고 선원들은 이에 대한 해결 방안으로 승무정원 증가, 선원노조의 충실한 역할, 선주의 인식 변화 등을 제시하였다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.312-312
• /
• 2011

All ship's ballast water should be inspected by administration after enter into force IMO BWM Convention. The purpose of the sampling device is to concentrate large amount of samples and to improve return rate of samples. It is composed of Concentration and Rinsing Part and optimized by the variety of tests. it is fully automated and therefore efficiently operated in ships.