• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.187-194
• /
• 2007

In order to control and manage oil-tanker scrapped materials and wastes properly, the actual conditions and global trends of the treatment and the management of ship scrapped wastes were surveyed and some amendments to marine pollution prevention law of Korea were proposed. Global annual volume of scrapped ships was estimated to be about 22 million DWT and most of them were scrapped in 4 major ship scrap countries such as Bangladesh, China. India and Pakistan and in minor ship scrap countries such as Turkey, the Philippines, Indonesia and Vietnam. The industry of ship scrap has been mainly developed in developing countries or undeveloped countries rather than in advanced countries. Most of scrapped ships were found to be small or medium size below 1,000 GRT In Jellanam-Do and Jeju-Do of Korea. Most of ship scrap enterprise and all enterprises of collection, transfer, treatment and disposal for ship scrapped materials and wastes were shown to be small sized in Korea. The regulations and/or rules which shall prohibit or limit trans-boundary movement of overage oil-tankers for scrap from Korea to developing or undeveloped countries, and vice versa should be Included in marine pollution prevention law of Korea. the criteria of manpower and facilities for enterprise of ship scrap, and for enterprises of collection, transfer, treatment and disposal of ship scrapped materials and wastes should be stipulated in marine pollution prevention law of Korea. It is desirable to introduce the system or concept of recycle or reuse of ship scrapped materials and wastes on producer's responsibility into marine pollution prevention law of Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2316-2322
• /
• 2012

The present study investigates a standardized framework for support system of ship design engineering. The purpose of this research is to improve the efficiency of information gathering and its use in tasks of the ship design engineering support system. Due to their variety and complexity, the existing engineering methods tend to waste time in searching for the standardized method and knowledge or to cause errors on tasks. Generally, these kinds of system have serious problems. The most serious one among them is that the existing system consists of both useful and useless data. This finally leads engineers to a failure in finding out useful information from the system. We have designed a standardized framework, which enables users to properly recompose the menu form depending on the task process, simplifies the methods at several process levels, and provides a more intuitive method in user interface environment in order to resolve the existing problems, minimize the system-operating costs, and improve the efficiency of engineering tasks.

• Plant Journal
• /
• v.16 no.3
• /
• pp.37-41
• /
• 2020

Lately old LNG carriers increased and ship price is getting down. So Interest for reuse and modification of used LNG carriers is growing. Also the needs for replacement of old power plant is increasing. Additionally eco friendly fuel such as LNG become attractive. Consequently gas power plant is getting much more popular than before. So in this research planning, we consider the floating power plant by modifying LNG carriers. This plant has the various function including storage, power plant and bunkering fuction etc. Through this multifunctional plant, we are ready for the old power plant shutdown and energy crisis in the future when we can supply the urgent mobile floating power plant quickly in time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.379-382
• /
• 2009

As IT becomes leading part of futurity industry, issue about Green IT is being on the increase and resources recycling, toxicity water use resection, saveenergy etc. are emphasized. Fundamental purpose for Neteuwokeusiseutem's Green IT realization that is constructed on ship studied about network security system that can control access that use resources as efficient and safe and is enemy of evil which can give subordinate of system for this and resect unnecessary hardware waste by back more.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.733-738
• /
• 2021

Recently, people's interest in marine leisure has been increasing, and research and development on leisure boats are actively being carried out to pioneer overseas markets. These days, the materials used for leisure boats are fiber-reinforced plastic (FRP) and aluminum alloy. However, FRP is hygroscopic and causes environmental problems, and aluminum alloy has high thermal conductivity and fire susceptibility. Therefore, titanium alloy is being adopted as a material for leisure boats instead. In this study, hull thicknesses and design pressures were calculated while considering dynamic effects for titanium boats. Four sets of rules and regulations were used: ISO 12215-5, RINA Pleasure Yacht, LR Special Service Craft, and KR High-speed Light Craft. The maximum bottom slamming loads were in the order of ISO, KR, LR, and RINA, and the required hull thicknesses were in the same order. This research might be helpful for understanding the rules, regulations, and overseas export of leisure boats.

• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.635-641
• /
• 2003

A recycling process for the waste FRP from boats was developed. The recycling process is composed of decomposition of waste FRP with propylene glycol and synthesis of recycled unsaturated polyester resin from the decomposed liquid material. Prior to the decomposition, waste FRP was cut into 2cm x 5cm segments and mechanical impact was applied by press roller to give gaps between cumulated laminates. Propylene glycol effectively decomposed the waste FRP segments and glass fibers were easily separated from decomposed liquid material. Recycled unsaturated polyester resin could be made from the decomposed liquid material by reaction with maleic anhydride and phthalic anhydride.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.368-371
• /
• 2009

선박용 침몰방지용 부양백의 소재를 개발하는데 있어 부양백 내의 부양기체인 질소가스가 장기 유지특성 보유 소재(gas barrier properties), 코팅 경량 직물형태로서 경량성 보유 소재 기술, 장수명의 부양 백 소재 개발, Silicone/Nylon/Silicone 코팅 다층 구조의 고강도 유지 특성 유지 및 재활용성 특성 유지 부양백 소재를 개발하였다. 이들 소재를 개발하는데 있어 Nylon 직물별 물성 조사로 우리가 개발 목표로 하는 nylon의 denier 별로 구매하여 이들에 대한 기본물성인 인장특성, 내노화성, 기체투과도 및 복원성을 조사하였으며, Nylon 직물에 Silicone의 코팅시험을 실시하였고, 최적 코팅 silicone의 선정을 통해 최적의 균일한 두께 특성, 최적의 강도 유지특성 및 gas barrier 특성을 갖는 silicone 및 코팅두께를 선정하여 최종적으로 부양백용 gas barrier성 수지의 선정하였다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.1
• /
• pp.46-49
• /
• 2008

Recycling glass fiber, 'F-fiber,' was obtained by the separation of the roving layer from waste FRP and the concrete products or structures were considered for its application. Experiment was carried out for the bending strength of aggregate (2.45 of cement) by weight and F-fiber (density of 1.45, volume ratio to all of the aggregate and the cement). Whereas the specimen containing 1% F-fiber showed the bending strength 23% higher than that without F-fiber after curing far 28 days, the one with 0.5% F-fiber did not give any change. It could be found, therefore, that the minimum mixing amount should be larger than 0.5% fur the strength reinforcement. One of the reinforcing concrete product, bench flume, containing 1% F-fiber showed 21% increment of bending strength In contrast to that without F-fiber.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2012

As one of the methods for recycling the FRP from the waste ships, separation of roving layer from the mat has some merits in a sense of the eco-friendly and economical recycling process. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using boiling concentrated sulfuric acid, methanol and isopropanol solution saturated with KOH, or hydrogen fluoride (HF) solution. Furthermore efficiently coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The layer differentiation and the automatic layer distraction move up the date of simple and automatic separation process for the waste FRP.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.273-278
• /
• 2012

The use of Al alloys instead of fiber-reinforced plastic(FRP) in ship construction has increased because of the advantages of Al-alloy ships, including high speed, increased load capacity, and ease of recycling. This paper describes the effects of probe diameter on the optimum friction stir welding conditions of 5456-H116 alloy for leisure ship, measured by a tensile test. In friction stir welding using a probe diameter of 5 mm under various travel and rotation speed conditions, the best performance was achieved with a travel speed of 61 mm/min. Using a probe diameter of 6 mm, rotation speeds of 170-210 rpm, and a travel speed of 15 mm/min produced a rough surface and voids because of insufficient heat input produced by the low rotation speed. At 500-800 rpm, chips were observed, although there were no voids, and the weld surface was excellent. However, at 1100-2500 rpm, many chips were produced due to excessive heat input. Heat effects were very evident on the bottom. For a travel speed of 15 mm/min, heat input caused by friction increased as the rotation speed increased. The mechanical characteristics were degraded by accelerated softening due to increasing heat input.