• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2013

This study focuses on a ship detection and tracking method using Frequency Modulated Continuous Wave (FMCW) radar used for horizontal surveillance. In general, FMCW radar can play an important role in maritime surveillance, because it has many advantages such as low warm-up time, low power consumption, and its all weather performance. In this paper, we introduce an effective method for data and signal processing of ship's detecting and tracking using the X-band radar. Ships information was extracted using an image-based processing method such as the land masking and morphological filtering with a threshold for a cycle data merged from raw data (spoke data). After that, ships was tracked using search-window that is ship's expected rectangle area in the next frame considering expected maximum speed (19 kts) and interval time (5 sec). By using this method, the tracking results for most of the moving object tracking was successful and those results were compared with AIS (Automatic Identification System) for ships position. Therefore, it can be said that the practical application of this detection and tracking method using FMCW radar improve the maritime safety as well as expand the surveillance coverage cost-effectively. Algorithm improvements are required for an enhancement of small ship detection and tracking technique in the future.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.205-212
• /
• 2007

Due to the construction of Incheon Grand Bridge, there is driven a necessity for rearranging the function of Inner Port with the development of Outer South Port. In this paper, I'd like to simulate the port operation levels of Lock Gate in Inner Port with estimating the traffic volumes of 2011 and 2015, which will reveal the Demurrage Cost and the Accumulation Cost of Freight in Inner Port. Finally I will evaluate the economic movement effects of the container ship's calling from Inner port to South Port/Outer South Port from 2011 to 2015. The results are as followings ; (1) The average utilization of Lock Gates are reduced by $7\sim8$ percentage point. (2) The mean queueing value are saved by 25 percentage point. (3) The Demurrage Cost and the Accumulation Cost of Freight except Lock Gate charges and the Benefit of Routeing Reduction are saved about 800 million Won annually.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2020

The characteristics of ship traffic routes and the long term fluctuation in marine traf ic volume of the incoming and outgoing routes of the Yeosu Gwangyang Port were analyzed using vessel traffic data from the past 22 years and a real-time vessel traffic volume survey performed for 72 hours per year, for three years, between 2015 and 2017. As of 2017, the number of vessels passing through Yeosu Gwangyang Port was about 66,000 and the total tonnage of these ships was about 804,564 thousand tons, which is a 400 % increase from the 189,906 thousand tons shipped in 1996. Specifically, the dangerous cargo volume was 140,000 thousand tons, which is a 250 % increase compared to 1996. According to the real-time vessel traffic volume survey, the average daily number of vessels was 357, and traf ic route utilization rates were 28.1 % in the Nakpo sea area, 43.8 % in the specified sea area, and the coastal area traf ic route, Dolsan coastal area, and Kumhodo sea area showed the same rate of 6.8 %. Many routes meet in the Nakpo sea area and, parallel and cross passing were frequent. Many small work vessels entered the specific sea area from the neighboring coastal area traffic route and frequently intersected the path of larger vessels. The anchorage waiting rate for cargo ships was about 24 %, and the nightly passing rate for dangerous cargo ships such as chemical vessels and tankers was about 20 %. Although the vessel traffic volume of Yeosu Gwangyang Port increases every year, the vessel traffic routes remain the same. Therefore, the risk of accidents is constantly increasing. The route conditions must be improved by dredging and expanding the available routes to reduce the high risk of ship accidents due to overlapping routes, by removing reefs, and by reinforcing navigational aids. In addition, the entry and exit time for dangerous cargo ships at high-risk ports must be strictly regulated. Advancements in the VTS system can help to actively manage the traffic of small vessels using the coastal area traffic route.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.127-132
• /
• 2004

Most q the domestic container terminals are inferior to throughput q container. The reason why they have the difference between the handling capacity q planed quay and its real. By putting into quay handling equipment, the productivity of quay can be improved, waiting rate q the ship can be lowed. This paper suggests more resonable terminal construction, throughout comparing with previous construction way, improved handling capacity and the economical efficiency of equipment costs, labor costs, construction costs, operation costs on change of terminal size by adding the equipment.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1173-1183
• /
• 2023

Over the past 20 years, Korea's overall import and export cargo volume has increased at an average annual rate of approximately 5.3%. About 99% of the cargo is still being transported by sea. Due to recent increases in maritime cargo volume, congestion in maritime logistics has become challenging due to factors such as the COVID-19 pandemic and conflicts. Continuous monitoring of ports has become crucial. Various ground observation systems and Automatic Identification System (AIS) data have been utilized for monitoring ports and conducting numerous preliminary studies for the efficient operation of container terminals and cargo volume prediction. However, small and developing countries' ports face difficulties in monitoring due to environmental issues and aging infrastructure compared to large ports. Recently, with the increasing utility of artificial satellites, preliminary studies have been conducted using satellite imagery for continuous maritime cargo data collection and establishing ocean monitoring systems in vast and hard-to-reach areas. This study aims to visually detect ships docked at berths in the Busan New Port using high-resolution satellite imagery and quantitatively evaluate berth utilization rates. By utilizing high-resolution satellite imagery from Compact Advanced Satellite 500-1 (CAS500-1), Korea Multi-Purpose satellite-3 (KOMPSAT-3), PlanetScope, and Sentinel-2A, ships docked within the port berths were visually detected. The berth utilization rate was calculated using the total number of ships that could be docked at the berths. The results showed variations in berth utilization rates on June 2, 2022, with values of 0.67, 0.7, and 0.59, indicating fluctuations based on the time of satellite image capture. On June 3, 2022, the value remained at 0.7, signifying a consistent berth utilization rate despite changes in ship types. A higher berth utilization rate indicates active operations at the berth. This information can assist in basic planning for new ship operation schedules, as congested berths can lead to longer waiting times for ships in anchorages, potentially resulting in increased freight rates. The duration of operations at berths can vary from several hours to several days. The results of calculating changes in ships at berths based on differences in satellite image capture times, even with a time difference of 4 minutes and 49 seconds, demonstrated variations in ship presence. With short observation intervals and the utilization of high-resolution satellite imagery, continuous monitoring within ports can be achieved. Additionally, utilizing satellite imagery to monitor changes in ships at berths in minute increments could prove useful for small and developing country ports where harbor management is not well-established, offering valuable insights and solutions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.332-337
• /
• 2013

National investment was performed in the research and development of renewable energy because of climate change by air pollution, exhaustion of energy sources, energy security, and so on. Biodiesel fuel of the renewable energy is highlighted as friendly environment energy, it is possible to operate in regular diesel engines when it is blended with invariable ratios without making any changes. Emission factors have been estimated for commercial ship from various research institutes; however, it is difficult to develop emission factors for military vessels. In this work, biodiesel blended fuel emission factors for sulfur dioxide and carbon dioxide were quantitatively estimated from propulsive diesel engine installed on naval vessel using fuel property analysis. In addition, exhaust emissions were quantitatively calculated on the basis of fuel consumption rate with biodiesel content by percentage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.716-721
• /
• 2015

As the severity of environmental pollution has increased, restrictions on air pollution have been strengthened. Stringent regulations have been imposed, not only on marine diesel engines but also on automotive and industrial power plants. Thus, biofuels have been directly applied in practical engines and used in training ships for basic research. Even though a high biofuel percentage cannot be used in a training ship engine for safety reasons, because this type of engine is larger than those used in institutional laboratories, the results will provide important basic information that will allow organizations to determine the status of a large output. Biodiesel fuel was studied to determine how it would affect the combustion characteristics and exhaust emissions of a marine diesel generator engine. The main results can be summarized as follows. Because the physical and chemical compositions of biofuels are similar to those of diesel fuel, it was found that their practical use was possible in a training ship. The specific fuel consumption and NOx increased, whereas a tendency was found for carbon monoxide and soot to decrease. In addition, no significant pressure change difference was found between the diesel fuel and biofuels.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.658-665
• /
• 2014

Natural gas for marine diesel engine is considered as an important and clean source of energy because of simultaneously reducing the emission of NOx, SOx and GHG. Especially with a appearance of shale gas, the using of natural gas has been investigated aggressively and expected to expand rapidly. By the reports, gas engine and diesel engine were both in a similar performance in the power aspect, and the SFOC of gas engine was shown a little better than that of diesel engine. But the characteristics of exhaust gas emission were different according to various combustion technologies. And with lean burn technology, the emission of NOx could be reduced to 85% lower than that of diesel engine. In this paper, it was described that a simulation program has been developed to predict NOx emission. The developed program is adopted two-zone model and Wiebe function for combustion in cylinder. The effects of premixed and diffusive combustion could be simulated by using the excess air ratio as input data. And it was confirmed that the results of simulation were agreed with the general trends of exhaust gas emission according to various combustion conditions such as lean burn, premixed and diffusive combustion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.751-758
• /
• 2020

SCR technology, which uses urea-water as a NO_x reducing agent, has been widely used to reduce NO_x in marine diesel engines. However, as an alternative NO_x reducing agent, solid-phase ammonium carbamate has several advantages, such as low-temperature NO_x reduction performance and NH₃ storage capacity. This study presents a method for evaluating the purity of ammonium carbamate using EA, FTIR, and XRD to investigate the change in the material characteristics of ammonium carbamate when it is exposed to various temperature and pressure conditions. In this study, it was found that the purity of ammonium carbamate can be effectively evaluated via EA analysis. The FTIR analysis results confirmed that the properties of ammonium carbamate did not change even after repeated heating and cooling under thermal decomposition temperature conditions, which may be applied to the SCR system of marine diesel engines. Additionally, it was found that when ammonium carbamate was exposed to the atmosphere for a long time, it transformed into ammonium carbonate.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.8
• /
• pp.435-443
• /
• 2016

In this study, MACT (Maximum Achievable Control Technology) application effect was evaluated for minimization of benzene fugitive emission in petrochemical industry. Although fugitive emission for benzene in the nation was regulated by the Clean Air Conservation Act from 2015, the US EPA already has introduced MACT standard to minimize its emission with up-to-date technology since 1995. EPA Emission Factor (AP-42) and EPA MACT Standard Guideline were used to assess MACT application effect. As a result, For MACT application it could reduce benzene emission up to 98% (average) comparing with uncontrolled facility, while the national regulation could achieve about 95% (average) reduction which is slightly lower than MACT. However there is no control measure in the national regulation to reduce benzene emission for vessel loading even though MACT standard requires preventive facility such as VRU (Vapor Recovery Unit). For further reduction of benzene emission, it needs to be mandatory for operation of VRU when benzene product is loaded in vessel. These efforts could contribute to achieve the global level for benzene emission management in national petrochemical industry.