• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.733-737
• /
• 2018

In this paper, we describe the effects on the power system by adding renewable generator. In order to examine the stability of the system, the system analysis was performed using the PSS/E software. We confirmed whether occur the line overload of system through the load flow analysis and contingency analysis. and confirmed whether exceed of fault current using the fault current analysis. Dynamic stability of the system is analyzed through dynamic simulation. The analysis of the system according to the addition of the renewable generator was carried out according to the power system reliability and electricity quality maintenance standard.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1599-1606
• /
• 2008

Recently, new dispersed generation systems such as photovoltaic, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy with the provision against oil crisis. The technical guidelines on the interconnection of dispersed generation systems have been established and conducted positively. However, protection devices (Re-closer) in primary feeder of distribution system interconnected with photovoltaic generation may cause problems with mis-operation, and then many customers could have problems like an interruption. So, this paper presents the optimal method to minimize the impact of interruption, using both the symmetric method and MATLAB/SIMULINK. And, also this paper shows the effectiveness of proposed method by simulating at the real distribution systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.37-44
• /
• 2004

This paper represents a new approach for the protective relay of power transmission lines using a Artificial Neural Network(ANN). A different fault m transmission lines need to be detected classified and located accurately and cleared as fast as possible. However, The protection range of the distance relay is always designed on the basis of fixed settings, and unfortunately these approach do not have the ability to adapt dynamically to the system operating condition. ANN is suitable for the adaptive relaying and the detection of complex faults. The backpropagation algerian based multi-layer protection is utilized for the teaming process. It allows to make control to various protection functions. As expected, the simulation result demonstrate that this approach is useful and satisfactory.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.4
• /
• pp.295-309
• /
• 2019

This paper demonstrates that the verification and analysis of the increase of hosting capacity of distributed energy resources in distribution system for the high penetration of distributed energy resources. In the case of generally designed distribution feeders in South Korea, it can host up to 10 MVA of distributed energy resources and the over voltage due to reverse power flow is prohibited beyond the range by the law of electric utility. However, it should take into consideration that there are some factors of extra hosting capacity such as generation characteristics of distributed energy resources and minimum loads that always exist to distribution system. For these reason, we choose a specific distribution system hosted 10 MVA of distributed energy resources monitored by distribution system operator and verify the impact of increasing hosting capacity such as power flow and voltage profile of distribution system. By the result, we could find that it is possible to increase the hosting capacity and define the factors to expand the hosting capacity of distributed energy resources in distribution system.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.457-462
• /
• 2009

In this paper we suggest optimal positioning algorithm for DER(distributed energy resource)s near ocean side by using Newton-Rhapson load flow calculation. By installing DERs within urban area, electric power can be effectively transmitted to each loads without constructing additional large scale power stations and transmission lines. Therefore, DERs have attracted worldwide attention as urban area energy sources. However, there are quite a few studies for estimation of power loss due to DERs' location change within urban area Hence, in this study, an optimal positioning scheme for DERs is proposed in order to minimizing electrical power loss.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2253-2260
• /
• 2009

The typical distribution systems have the power flow from distribution substations (sources) to customers (load) only as one direction. However, in the case where new energy power sources are connected to distribution systems, the output variations of new energy sources to distribution systems, which is so called reverse power flow, may cause the bi-directional power flow. So, the reverse power flow has severe impacts on typical power system, for example power quality problems, protection coordination problems, and so on. Therefore, this paper proposes the algorithm for Multi-functional protection devices in distribution systems in the case where new energy sources are interconnected. The proposed algorithm is verified to show the effectiveness by simulating and experimenting the prototype systems.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.10
• /
• pp.480-488
• /
• 2001

This paper presents a technique that can obtain an optimal solution for the Security-Constrained Economic Dispatch (SCED) problems using the Interior Point Method (IPM) while taking into account of the power flow constraints. The SCED equations are formulated by using only the real power flow equations from the optimal power flow. Then an algorithm is presented that can linearize the SCED equations based on the relationships among generation real power outputs, loads, and transmission losses to obtain the optimal solutions by applying the linear programming (LP) technique. The objective function of the proposed linearization algorithm are formulated based on the fuel cost functions of the power plants. The power balance equations utilize the Incremental Transmission Loss Factor (ITLF) corresponding to the incremental generation outputs and the line constraints equations are linearized based on the Generalized Generation Distribution Factor (GGDF). Finally, the application of the Primal Interior Point Method (PIPM) for solving the optimization problem based on the proposed linearized objective function is presented. The results are compared with the Simplex Method and the promising results ard obtained.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.295-297
• /
• 2005

본 논문에서는 지금까지 각각 독립적으로 운전되었던 동북아시아(대한민국, 북한, 러시아) 전력시스템이 계통 연계를 통하여 얻을 수 있는 경제적 효과에 대한 평가 프로그램의 개발에 대하여 설명한다. 본 평가 프로그램의 목적는 향후 동북아 전력시스템의 계통 연계시 각 나라들의 발전소 건설 및 운용, 그리고 연계설비(Tie line)의 투자비용을 최소화할 수 있는 방안을 찾아 내는 것이다. 이를 통해 독립적으로 운전되는 것에 비해 계통연계를 통한 것이 보다 높은 경제적인 효과를 거둘 수 있음을 최종적으로 보이고자 한다. 문제를 좀 더 쉽고 빠르며 효과적으로 풀기 위하여 신규 발전설비와 연계선로에 대한 계획측면의 변수와 발전양와 선로에 흐르는 조류양의 제약 그리고 각 노드에서의 전력수급 조건 둥의 운전측면의 변수를 함께 포함시킨 선형 계획법 (LP, Linear Programming) 모델 로 정식화한 뒤 최적화 프로그램인 CPLEX를 통하여 해를 구한다.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.113-116
• /
• 2004

Many methods to examine the vulnerable areal for the contingencies in the power system. The most widely used index for the vulnerable area investigation has been the reactive power margin or sensitivity analysis. But we can get the results of these analyses if only the results of load flow are convergent in severe contingencies, otherwise these methods are not adoptable. We can present a good index for overcoming severe contingencies, if we can get the vulnerable areas by bus sensitivity in severe contingencies, though the power flow equation is unsolvable. This paper simulates unsolvable severe contingencies by using branch parameter continuation power flow. We can compute the vulnerable areas in unsolvable severe contingencies by normal vector at a nose point of a $\nu-V$ curve. Presented method is checked the input reactive power of the vulnerable areas in KEPCO system.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.162-165
• /
• 2001

본 논문은 EMTDC/PSCAD 프로그램을 이용한 80MVA UPFC(Unified Power Flow Controller)해석모델 개발과 2003년 실계통 적용시 적용효과에 대하여 기술하였다. UPFC는 90년대 이후 개발되고 있는 유연송전 시스템(FACTS : Flexible AC Transmission System)기기중 전압. 임피던스, 위상각등 송전선로에서의 전력조류제어를 위한 모든 파라미터를 동시에 고속으로 제어 할 수 있는 대표적인 FACTS 기기이며, 국내에도 2003년 강진 S/S에 80MVA 용량의 UPFC가 적용될 예정이다. 그러나 실 계통에서의 FACTS기기 적용을 위해서는 다양한 적용 효과분석 및 충분한 신뢰도 테스트가 선행되어야 한다. 따라서 이를 위한 기기 해석모델 개발은 매우 중요하다고 할 수 있다. 본 논문은 국내 전력 계통에 최초 적용되는 80MVA UPFC Pilot Plant에 대한 EMTDC/PSCAD 해석모델 개발결과에 대하여 기술하였다. EMTDC/PSCAD는 EMTP와 더불어 전력시스템의 과도현상 해석을 위한 신뢰성있는 프로그램이다.