• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.118-123
• /
• 2004

This paper studies islanding detection of DG(distributed generation) considering fault location. Through the past studies, we found that islanding detection has been studied that DG disconnected when power islanding was detected by power state change and output change of DG. But, fault location was not considered. For example, fault in adjacent distribution line, fault on interconnection line fault, load shave by overload and normal operation were not considered. In this paper, We distinguish these considerations through power state change. Also, we proved islanding detection algorithm through PSCAD/EMTDC simulation.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1493_1494
• /
• 2009

초고압 전력 케이블용 도체 접속을 위한 접속방법으로 압축형(compressing type), 용접형(welding type), 압축-용접형(CW type; compressing-welding type)의 슬리브는 물론 동과 알루미늄의 이종(nonidentical materials) 접속을 위한 슬리브를 개발 하였으며, 전기적, 기계적으로 검증된 제품 개발을 위하여, 슬리브의 구조 변경과 접속 방법의 차이뿐 아니라 접속 전후의 응력 평가를 위해 슬리브 시편의 인장시험(tensile strength) 결과에 따른 슬리브 제작 및 시험을 진행하였다. 신뢰성 있는 제품 개발과 데이터를 얻기 위하여 초고압용 지중 고압 케이블을 시험 시료로 적용하여 시험 선로(test loop)를 구성하였으며, 이를 통하여 구조와 재질에 따른 접속 방법, 이상 온도 상승 또는 국부적인 고온 부위 발생 여부 등의 전기 시험 및 열싸이클 전압 시험(heating cycle voltage test) 조건을 설정하여 시험 전후의 열신축 등 전기적, 기계적 특성을 평가하였다. 접속 슬리브의 구조 및 재질에 따른 위치별 발열 양상을 체크하였으며, X-ray 장비를 이용하여 슬리브 내부의 압축 및 충진 정도를 점검함으로써 기존 접속 슬리브 보완은 물론 개발된 접속 슬리브의 설계 기준 및 안전율을 설정 할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.91-98
• /
• 2011

In this study, we measure the aerodynamic forces acting on an AREX train in a crosswind by wind tunnel testing. A detailed test model scaled to 5% of the original and including the inter-car, under-body, and the bogie systems was developed. The aerodynamic forces on the train vehicles have been measured in a 4 m $\times$ 3 m test section of the subsonic wind tunnel located in Korea Aerospace Research Institute (KARI). The aerodynamic forces and moments of the train model on two different track models have been plotted for various yaw angles, and the characteristics of the aerodynamic coefficients have been analyzed at the experimental conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.94-100
• /
• 2008

Available transfer capability(ATC) quantifies the viable increase in real power transfer from one point to another in a power system. ATC calculation has predominantly focussed on steady-state viability. But ATC assessment with transient stability constraints has a dominant part in overall ATC calculation. ATC assessment requires a reputation of (n-1) security assessment with constraints of thermal limits, voltage stability and dynamic stability. An estimation of determinant contingency screening method is used for computing eigenvalue of Jacobian matrix. This paper proposed a methods to ATC calculation using energy function. Constraints is used thermal limits, voltage stability and transient stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1158-1168
• /
• 1994

The paper proposes a distributed control self-healing algorithm for a line failure to improve the restoration time. This proposed self-healing algorithm acquired the fast restoration time by reducing the number of control messages and the queueing delay. And the reduction of queueing delay was attained by the ASC_NULL(Available Spare Channel_NULL) message which informs neighbor nodes that a source node has no available spare channel to reduce the waste of time during the rerouting. It is difficult for this proposed self-healing algorithm to be compared with other self-healing algorithms, because each self-healing algorithm has different simulation conditions. So, the performance of the proposed self-healing algorithm was compared with only NETRATS(NETwork Restoration Algorithm for Telecommunication Systems). The results of the simulation showed that the proposed self-healing algorithm was better than NETRATS in the restoration time.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.295-297
• /
• 2005

본 논문에서는 지금까지 각각 독립적으로 운전되었던 동북아시아(대한민국, 북한, 러시아) 전력시스템이 계통 연계를 통하여 얻을 수 있는 경제적 효과에 대한 평가 프로그램의 개발에 대하여 설명한다. 본 평가 프로그램의 목적는 향후 동북아 전력시스템의 계통 연계시 각 나라들의 발전소 건설 및 운용, 그리고 연계설비(Tie line)의 투자비용을 최소화할 수 있는 방안을 찾아 내는 것이다. 이를 통해 독립적으로 운전되는 것에 비해 계통연계를 통한 것이 보다 높은 경제적인 효과를 거둘 수 있음을 최종적으로 보이고자 한다. 문제를 좀 더 쉽고 빠르며 효과적으로 풀기 위하여 신규 발전설비와 연계선로에 대한 계획측면의 변수와 발전양와 선로에 흐르는 조류양의 제약 그리고 각 노드에서의 전력수급 조건 둥의 운전측면의 변수를 함께 포함시킨 선형 계획법 (LP, Linear Programming) 모델 로 정식화한 뒤 최적화 프로그램인 CPLEX를 통하여 해를 구한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.8
• /
• pp.1777-1781
• /
• 2011

Tosin backplane system design of this study (Backplane) from the HSTL (High-Speed Transceiver Logic) characteristics of the transmit and receive data using the HSPICE simulations and the actual implementation on the FPGA Data transmission characteristics were described by comparing the simulation results. Simulation and measurement criteria for point to point data transmission characteristics of wire length possible to send and receive data about the speed limits were reviewed. Measured point to point connection to send and receive signals at terminal velocity, the factors that affect the electrical noise around the wire length and showed a very important role.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.111-117
• /
• 2007

In this paper, a new marchand balun using broadside-coupled coplanar waveguide(CPW) on flexible printed circuit (FPC) is proposed. The proposed balun is designed based on the coupled line theory. The fabricated balun shows compact size and improved performance compared to the conventional microstrip line marchand balun. Measured amplitude and phase imbalance between the two balanced output ports are within 0.2 dB and $1^{\circ}$ respectively in a wide frequency range($1.63{\sim}3.44$ GHz). The proposed balun is expected to be used between various antennas and RF front-ends as a functional interconnection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.51-56
• /
• 2012

The resonance properties of circular vertical-cavity surface-emitting lasers (VCSELs) are studied by using a newly developed equivalent network approach. Optical parameters, such as the stop-band or the reflectivity of periodic Bragg mirrors and the resonance wavelength, are explored for the design of these structures. To evaluate the differential quantum efficiency and the threshold current density, a transverse resonance condition of circular modal transmission-line theory is also utilized. This approach dramatically reduces the computational time as well as gives an explicit insight to explore the optical characteristics of circular VCSELs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.300-300
• /
• 2008

우리나라의 전기에너지 수요가 지속적으로 증가함에 따라 새로운 송배전 선로의 구축이 필요하다. 하지만 현재 도심지의 전력구에는 더 이상의 지중선의 증설은 불가능하며 가공선 설치의 경우 환경 민원의 부담을 떠안게 된다. 그래서 기존 동도체의 회선당 송전 한계를 극복하고 대용량 송전 및 손실을 크게 줄일 수 있는 초전도 케이블의 연구가 세계적으로 활발히 진행되고 있다. 한국전력 전력연구원은 신 전력시스템으로서의 22.9 kV급 초전도케이블 시스템을 고창전력시험센터에 설치하고 운영 및 유지 보수 과정을 통하여 실제 계통 적용을 위한 최적 운전조건을 연구하고 있다. 이 논문에서는 실제 부하 상황을 모의하기 위하여 초전도케이블의 장기 부하변동 시험에 따른 케이블 송전 능력 확인 및 냉각시스템의 반응성을 살펴보고 부하변동 시험 후 초전도케이블 도체 열화 여부를 확인하기 위하여 직류 임계전류를 측정하였다. 그 결과 부하변동 시험 전의 임계전류 값과의 변화율이 삼상 모두 ${\pm}1$% 내외로서 오차범위를 벗어나지 않으므로 건전한 것으로 판단되었다.