• Land and Housing Review
• /
• v.15 no.1
• /
• pp.147-156
• /
• 2024

This study aims to reduce CO₂ generated during the manufacturing process by using limestone (CaCO₃), a carbonate mineral used in the production of cement clinker, as a decarbonated raw material that does not contain CO₂. Among various industrial by-products, we attempted to use cement paste attached to waste concrete. In general, limestone for cement must have a CaCO₃ content of at least 80% (CaO, 44% or more) to ensure the quality of cement clinker. However, the CaO content of waste concrete fine powder is about 20% on average, so in order to use it as a cement clinker raw material, the CaO content must be increased to more than 35%. Therefore, by using the difference in hardness of the mineral composition of waste concrete fine powder to selectively crush CaO type minerals with relatively low hardness, classify and sieve, the CaO content can be increased by more than 35%. Accordingly, in this study, we experimentally and statistically reviewed and analyzed the optimal conditions for efficiently separating CaO and SiO₂ and other components by selectively pulverizing minerals containing relatively low CaO through a grinding process. As a result of the optimal grinding conditions experiment, it was found that the optimal conditions were a grinding time of less than 5 minutes, a type of material to be crushed of 30 mm, and an amount of material to be crushed of 1.0 or more. However, it is judged that it is necessary to review pulverized materials of mixed particle sizes rather than pulverized products of single particle size.

• Archives of design research
• /
• v.17 no.1
• /
• pp.277-288
• /
• 2004

The purpose of this study is to find out the characteristics of building materials and exterior colors of the traditional palaces in Korea and Japan. Nijo-Castle in Japan and Changdeok-Palace in Korea were selected for the subjects of the study. For the color measurement and analysis, NCS color system was used. The results of this study are as follows. In Changdeok-Palace, Korean pine woods, granites, tiles, blue tiles, clays, Jeon-dol(Korean unique tiles for fences and ground), lime powders, straws, Korean traditional papers, bronze were used for building materials. In Nijo-Castle, however, Japanese pine woods, granites, tiles, clays, lime powders, straws, Japanese traditional papers, bronze and golds were used. As for hues in Changdeok-Palace, Y to R, G ∼ G30Y, R80B∼B, B to G were used mainly, and in Nijo-castle, Y to R, B80G∼B90G, G30Y were found. As for tones in Changdeok-Palace, every kinds of tones were used except 'Deep chromatic' and in Nijo-Castle, 'Greyish chromatic', 'Toned light grey', 'Dark deep', 'Toned dark grey', 'Toned grey' were used. At this study, the building materials and exterior colors were analyized between Changdeok-Palace and Nijo-Castle. And from the results, it is expected that we would understand different cultures of two nations, and get the concept of making their own unique characteristics.

• Journal of the Speleological Society of Korea
• /
• no.89
• /
• pp.46-58
• /
• 2008

동굴 퇴적물의 형성과정은 1단계 기권 (Atmosphere): 빗방울 (H2O) 이 대기중에서 CO2의 혼합으로 산성비 (H2CO2)가 되어 석회암 (CaCO3)에 떨어져서 최초의 용식작용이 시작된다. 2단계 토양권 (Pedosphere): 산성비와 석회암성분이 합쳐 형성된 가용성 화합물 (Ca(HCO3)2)은 식생부식(植生腐植)에 의한 토양 (Humic acidic soils) 에 의해 기반암의 용식이 촉진 되어 지표에는 Karren과 석문 (석문(石門) Natural Bridge), 와지 (Dolines, Sinkholes) 지형을 형성시키고, 암석의 분순물은 지표에 남겨져서 결국 적색풍화토 (Residuum, Risidual Redish Soils) 를 만든다. 3단계 암권 (Lithosphere): 용식작용에 의해 지상에서 지하 로 확대되어진 모암의 균열을 타고, 지하의 공간이 지하수의 유입과 유출에 의해 점차 확대되어 동공형의 Conduites; Voids; Shaft 이라는 특수지형을 형성시키고,동굴의 천정으로부터 나온 Ca(HCO3)2 는 탄산염의 지속적인 분해 공급에 의해 동굴내에는 종류석, 석순, 유착석 (Speleothem)등의 새로운 동굴지형 (Speleoscape)을 조성하게 된다. 4단계 수권 (Hydrosphere): 동굴의 형성작용을 거친 물은 동굴지하수로 잔여 Calcite를 함유한 채로 유출 (Spring) 된다. 동굴을 떠난 잔여 Calcite는 또다시 하천유역에 침전시켜서 석회화 단구형의 집적지형 (Tufa Formation: Tufa Dam, Tufa Flowstone)을 최종적으로 동굴을 나와 외벽 이나 하천의 바닦에 형성하는 과정을 거치면서 카르스트 지형의 발달과정이 1차적인 순환을 마치게 된다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.252-260
• /
• 2022

In Korea, low-quality kaolin has significantly greater reserves and superior economic efficiency than high-purity kaolin. However, the utilization is low because it does not match the demand conditions of the market, and it is difficult to find a suitable source of demand. The purpose of this study is to derive the possibility and optimal calcination temperature of domestic low-quality kaolin that can be used as a raw material for limestone plastic clay cement (LC³). Isothermal calorimetry, X-ray diffraction analysis, Thermogravimetric Analysis, and compressive strength tests were conducted to evaluate hydrate generation and mechanical properties of LC³ paste according to calcination temperatures (600 ℃, 700 ℃, 800 ℃, 900 ℃). As a result, although 50 % of the clinker was replaced, the domestic low-quality kaolin clay produced calboaluminate hydrate and C(A)SH from the 3rd day of hydration, showing almost equal or higher strength to OPC, and there was a big difference in strength depending on the firing temperature.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.15-27
• /
• 2004

The first aim of mass product of glass in Automatic bottle glass industry is to decrease the cost and to increase the quality. Second, the cullet is how widely used to save the energy and reducing of ecomaterials. However the physical and chemical properties of Soda-lime glass would be come true at the lower than 2% $Al_2 O_3$. Unfortunately the $Al_2 O_3$ contents of domestic silica is greater than 4% Since small glass class than 200ml bottle is made in domestic silica the producting efficiency would be decreased due to the defect such as cord, knot, devitrite, pore etc. There are many problems such as devitrifiacation and deteriorated effect on production in glass industry became of increasing of plate glass cullet. It is tried to solve these kinds of problems using various analysing methods in this experiments.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.335-347
• /
• 2016

The mineralogical and geochemical characteristics of diverse carbonate rocks can be investigated by using VNIRSWIR(visible near infrared-short wavelength infrared) spectroscopic analysis as a rapid, nondestructive, and inexpensive tool. Comparing whole rock analysis to VNIR-SWIR spectroscopic analysis, the analytical method was investigated to estimate CaO contents, mud impurity, and whiteness of carbonate rocks involved in high-grade limestones in the field. We classify typical carbonate rocks in the upper Pungchon Formation in high-grade limestone mine area such as the Gangweon, Chungmu and Baegun mine in the Jeongseon area. The results show that powdered specimen has much higher reflectance than cutted specimen between the same sample. Whiteness is highly correlated with reflectance(0.99) for powdered specimen. The absorption of mineral mixtures shifts in position as a result of the mass ratio of calcite and dolomite in the Chungmu mine by changing to 75:25, 50:50, and 25:75. The absorption peak position in carbonate mixtures is highly correlated with CaO contents(0.98~0.99). Based on color system, the carbonate rocks are grouped into (milky) white, light grey, light brown, grey, and dark grey. The absorption peak position shifts from 2340 nm to 2320 nm as CaO contents decrease from 55.86 wt.% to 29.71 wt.%. We confirmed that absorption peak position shifts depending on the amount of Ca, which is bonded to $CO{_3}^{-2}$, Mg, and Fe contents replacing Ca. This result suggests that CaO contents in carbonate rocks can be considered to quantitative analysis in the field by spectroscopic analysis.

• Economic and Environmental Geology
• /
• v.50 no.4
• /
• pp.287-302
• /
• 2017

The carbonate rocks of the Daegi Formation are composed of the limestone at the upper and lower zones, and the dolomite at the middle zone, in which the upper zone has higher CaO content than others. The colors of carbonate rock in the Daegi Formation can be divided into five types; white, light brown, light gray, gray, and dark gray. The white to light gray colored rocks correspond to the high purity limestone with 53.15 ~ 55.64 wt. % CaO, and the light brown colored rocks contain 20.71 ~ 21.67 wt. % MgO. The bleaching of carbonate rocks are not related to CaO composition of the rocks, as light gray rocks tend to be higher in CaO content than those of the white rocks at the lower zone. The pelitic components are also occasionally increased in white limestone than light grey one. $Al_2O_3$ is one of the most difficult content to remove during hydrothermal processes, so the interpretation that the limestone is purified together with hydrothemral bleaching, has little merit. The wide range (over 16 ‰) of ${\delta}^{18}O_{SMOW}$, smaller variation (within 2 ‰) of ${\delta}^{13}C_{PDB}$ are apparent in both the upper and lower zones, which indicate the Daegi Formation had been affected overall by hydrothermal fluids. The K-Ar isotopic age of hydrothermal alteration in the GMI limestone mine is $85.1{\pm}1.7Ma$. Gradual change from grey through light grey to white limestone is accompaned by lower oxygen stable isotope values, which is major evidence that the hydrothermal effect is the main process of the bleaching. Although the Daegi Formation has suffered from hydrothermal activity and increase in whiteness, there is no clear evidence demonstrating the relationship between bleaching and high purity of limestone. The purification of limestone has nothing to do with the hydrothermal activity in this area. Instead, it should be considered that the change of sedimentary environment related to see-level fluctuation which can prevent deposition of pelitic components especially $Al_2O_3$ contrbuted to the formation of the high purity limestone in the upper zone of the Daegi Formation. Considering the evidences such as increase in CaO content of limestone by depth, gradual change from calcite to dolomite at the lower zones, and occurring the high purity limestone at the upper zone, the interpretation of sequence stratigraphic aspect to the formation of the high purity Daegi limestone appears to be more suitable than that of hydrothermal alteration origin.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.3
• /
• pp.223-232
• /
• 1998

The main experiment related to this report was undertaken to assess the effects of two rates of $Ca(OH)_2$ (0, 250 kg/10a only at establishment) and five rates of $N-P_20_5-K_20$ (0-0-0, 0-10-10, 6-15-15, 12-20-20, 24-25-20 kg/10a/year) on the pasture establishment, forage yield and quality, and vegetation etc. After this 10-year main e experiment pasture had been used to assess the effects of the above treaments on the soil characteristics in oversown hilly pasture of a grass-clover sward. soil properties of mutual ratios of exchangeable cations at d different soil depth, and the visible characteristics of soil conservation obtained are summarized as follows; 1. Compared with the properties of soil fertility and the level for the likelihood grass tetany, the mutual ratios of exchangeable cations in soils; Ca:Mg:K(% of CEC), Ca:Mg:K(K=I), $K/\sqrt{Ca+Mg}$, Mg/K, K/Mg, and Ca/Mg, were discussed at different soil depth. Before and after experiment, these ratios were generally unbalance and unsuitable, and were rather worsened in the order of Mg>Ca>K under the conditions of liming and NPK fertilization without Mg. 2. The ratios of Ca and Ca/Mg were increaby liming, whereas it of $K/\sqrt{Ca+Mg}$ was redused. The ratios of K and $K/\sqrt{Ca+Mg}$ in control and the heavy fertillization of NPK(especially N) were rather lowered than those in the low and medium fertilizations of NPK. 3. The prperties of consevation were closely related with the forage productivity/vegetation rates, as affected by liming and the application rates of NPK. In control of NPK, It was shown to be the worst soil conservation; severly eroded(3rd grade), exporsure of subsoil, redish brown in soil colour, and 18.8% of cobble and stony in covering rate. 4. The improvement of soil conservation was greatly enhanced by increasing the NPK rate. In the medium and heavy fertilizations of NPK, it was shown to be the favorable improvement of soil conservation; slightly eroded(lst grade), covered with humus layer/grass residues in surface soil, dark brown in surface soil colour, under 1% of cobble and stony in covering rate. The increasing of legume yield/vegetation rate by liming rather enhanced the soil conservation of grassland.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.1
• /
• pp.10-20
• /
• 1998

Heavy metal contamination in subsurface soils and stream sediments at the Suggok mine area were investigated on the basis of major, trace and rare earth elements geochemistry and mineralogy. The Sanggok mine area is mainly composed of Cambro-Ordovician carbonate rocks. The mine had been mined for Pb-Zn-Fe and Au- Ag, but already closed in past. For major elements, especially Fe (mean value=18.58 wt.%) and Mn (mean value=4. 18 wt.%) are enriched in soils, and the average enrichment indices of soils and sediments are 6.84 and 1.54, respectively. The average enrichment index of rare earth elements are 0.92 of mining drainage sediments and 0.52 of subsurface soils on the tailing dam. Concentrations of minor and/or environmental toxic elements in those samples range from 29 to 3400 for As,1 to 11 for Cd, 35 to 292 for Cu, 50 to 1827 for Pb, 1 to 22 for Sb and 112 to 2644 for Zn. Extremely high concentrations (mean values) are found in subsurface soils on the tailing dam (As=2278, Cd=7, Cu=206, Pb=1372, Sb=14 and Zn=2231 ppm, respectively). Average enrichment index normalized by composition of non-mining drainage sediments is 2.42 in mining drainage sediments and 25.47 in subsurface soils on the tailing dam. Based on EPA value, enrichment index of toxic elements is 0.53 in non-mining drainage sediments, 1.84 in mining drainage sediments and 23.71 in subsurface soils on the tailing dam. As a results from X-ray powder diffraction method, mineral composition of soils and sediments near the mine area varied in part, and are calcite, dolomite, magnesite, quartz, mica, chlorite and clay minerals. With the separation of heavy minerals, soils and sediments of highly concentrated toxic elements included some pyrite, arsenopyrite, sphalerite, galena, goethite and hydroxide minerals on the polished sections.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.2
• /
• pp.40-61
• /
• 2017

This study investigated material characteristics of composition and variable strength measurement using physicochemical and petrographic analysis for lime-soil mixture barrier tombs of Guri Galmae site in Joseon Dynasty. The tomb barriers are composed mainly of microcrystalline calcite, quartz, feldspar and mica with lime matrix. The lime matrix shows compact sheet texture, and some samples show hydration aggregates with needle-shaped textures. Gypsum occurred as a secondary process where carbonization reactions were poor. Concentrations of CaO in the tomb barrier very widely ranged from 4.43 to 36.19 wt.%, specific gravity and absorption ratio of the materials show of 1.35 to 1.62 and 20.1 to 32.6%, respectively. As the rebound hardness, the materials ranged from 10.0 to 28.4 (mean 15.7). The values are higher in the $-90^{\circ}$ direction rather than in the $0^{\circ}$ direction with the consequence that the values indicate more strength toward the vertical direction. Difference in strength by directions was caused by the directions of the tomb barriers, which is related to the processes in each stage. In the tomb barriers, ultrasonic velocity and unconfined compressive strength ranged from 1,049.2 to 1,728.9m/s and under 5.00MPa, respectively. Variation patterns between the two are very similar in values. As the result of composition and strength, the materials of higher contents on CaO are higher in strength values. Generally, techniques and skills to make the lime-soil mixture barriers are interpreted as low qualities in relatively.