• Journal of Korean Library and Information Science Society
• /
• v.46 no.1
• /
• pp.271-290
• /
• 2015

This study was carried out to investigate the publishing culture in Gwangju during the period of Japanese occupation. From the bibliographical study through the existing books, it was found that mainly genealogical records, biographies, collective literature, geography books were published. Particularly many books were published from 1929 until 1942. It was a noticeable change in this period that several modern publishers and printing houses appeared. In 1930s the active publishing companies were established in Gwangju, such as Gwangmyungdang, Namjin Printing House, Samkidang, Youngrimdang, Sungmundang etc. These companies were located at Numun-jung, Kung-jung, Daewha-jung, Myungchi-jung, Kum-jung, repectively. They published books by Seokpan(石版)-printing unlike the publishers in Seoul.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.4
• /
• pp.305-337
• /
• 2019

The aim of this thesis is to explore some aspects and characteristics of 109 volumes of collections of works at Uiryeong area in Gyeongsangnam-do Province. The author analyzed type of printing, type of collections of works, their birth year and the family name of the author, the place and the year, and the publisher of the publication of these different 109 kinds of the collections of works. The results are as follows: The collections of works demonstrate their forefathers' academic competencies. The types of printings were divided into 4 types, wood block printing, wooden movable-type printing, new lead-type printing, lithography printing. Of the collections of works 48% were wooden movable-type printing. The types of collections of works were divided into 3 types, Munjip(文集), Yujip(遺集), and Silgi(實記). Of the collections of works 49% were Munjip. The authors were local intellectuals. Of these authors 67% of authors were born in the 19th century. Twenty nine lineage groups published collections of works at Uiryeong area. 90% of the publications were published in the 20th century. In terms of place, 81% of the collections of works were published in the worshipping halls for their ancestors. 63% of the collections of works were published within 50 years after the author had died.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4130-4135
• /
• 2013

This paper is a special-purpose machine studies for processing various patterns on the surface of the stone. We have developed a special-purpose machine that can be applied in various patterns upon the surface treatment of the stone with the water jet. The special-purpose machine is Configured of Transfer mechanism, motion controller, multi-nozzle mechanism, ultra high pressure water control system and S/W. We conducted a performance evaluation experiments of the pattern. We have developed a special-purpose machine with a precision of machining error ${\pm}0.5mm$ and pattern processing of various types.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.154-160
• /
• 2006

This study is performance thesis to examine structure of excessive consuming culture of modern people's desire turning away from modern people's original purpose of aiming life that is well-being. Method of the research is theological examination of people's desire into consuming and well-being culture is critically analyzed by creation of meanings and differences of showcase that symbolize consuming culture. Also my piece of work 'Well-buying Shop 1' that above theory is applied is selected for focused analysis of concept realization method in video configuration method and technique. The symbol Showcase in the animation represent laboratory of consuming culture and desire for ownership. The animation runs for 3 minutes and 50 seconds focused on animal characters raised in well-being farm. Through cut out animating environment, animal characters have life in the animation and they are completed with long take method and temperament editing type for effort of liberal devotion between audience and the animation. Lithographic technique is used for characters and background images for trial of pictural density by pressures and variety of colors. This study was conducted with the basis of above animation showing opportunity and it has significance on trial of various color of lithographic expression technique that are not commonly used in animation image production.

• Journal of Radiation Protection and Research
• /
• v.16 no.1
• /
• pp.15-24
• /
• 1991

Radon-222 exhalation rate from several domestic building materials were experimentally measured by using radon cup method, in which a CR-39 plastic is used as a passive radon detector. The radon detection factor of CR-39 detector determined in a series of calibration experiments was $0.164{\pm}0.005(tracks\;cm^{-2}/Bq\;d\;m^{-3})$, which is consistent with those reported by other investigators. The radon exhalation rates of several building materials (brick, red brick, concrete block, granite plate, concrete floor and wall) ranges from $6.8{\times}10^{-6}\;(granite plate)\;to\;75.0{\times}10^{-6}Bq/m^2-sec(brick)$ with the increasing order of granite plate, red brick, concrete wall, concrete block, concrete floor and brick. It showed that the CR39 radon cup can be efficiently utilized in measuring the radon-222 gas exhalation rate from building materials.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.37-37
• /
• 2002

반도체 소자의 집적도는 지난 수십년간 끊임없이 증가해 왔다. 이러한 추세가 계속 된다면 앞으로 수년 이내에 100 nm 이하의 선폭을 갖는 집적회로가 출현하게 될 것이다. 수-수십나노 미터 크기의 구조가 이와같이 제품에 실제로 응용되려면 수 나노미터의 길이에 대한 표준 측정 기술이 확보되어야 하고 이 측정 기술을 서로 비교 평가 할 수 있는 표준 물질이 필요하다. 본 연구에서는 표준 물질로 사용될 수 있는 1차원 나노 구조를 제작하였다. 제작된 1차원 나노 구조는 선폭이 90 nm인 네모난 산과 네모난 우물들이 반복적으로 나타나는 형태를 갖는다. 나노 구조가 제작된 총영역은 0.1 ㎜ × 0.1 ㎜의 정사각형 영역이다. 1차원 나노 구조는 전자빔 석판 기술을 이용하여 제작하였다. 균일한 구조를 만들기 위해 전자 빔의 도즈량 최적화, 전자 빔의 비대칭성의 영향 최소화, 에칭 공정 변수 최적화 등 공정 조건을 선별하는 연구를 하였다. 본 연구에서 제작된 1차원 나노구조는 전자현미경의 배율 보정, Scanning Probe Microscope의 이미지 보정 등에 사용될 수 있을 것이다.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1911-1913
• /
• 2001

전위차 측정형 바이오 센서는 기준전극에 대한 센서 전극의 전기화학적 전위를 정확하게 측정하여야 하므로 기준전극의 안정성이 매우 중요하다. 기준전극의 전위는 전해질 용액 내의 염소 음이온 농도에 영향을 받으나 다행히도 혈액 내의 염소 음이온 농도는 거의 변화가 없으므로 혈액 속에서의 은/염화은 기준전극의 전위도 거의 변화가 없다. 본 연구에서는, 사진석판 (Photolithography) 공정을 이용하여 실리콘 표면 및 다공질 실리콘 표면에 은/염화은 박막 기준전극을 제작하고 시료 용액에서의 drift, 안정성, 재현성 등에 대한 특성을 고찰하였고, SEM, AES, EDX 스펙트럼 등을 이용하여 전극의 표면을 분석하였다. 시료 용액의 염소 음이온 농도를 $10^{-4}$M에서 1M까지 변화시켜가며 기준 전극의 전위를 측정한 결과 약 50mV/pCl의 기울기를 얻었으며 이것은 Nernst식을 잘 따르는 결과이다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.23-30
• /
• 1999

We experimented on the sub 50nm patterning using E-beam lithography system. SAL601 negative E-beam resist was used for this experiment. In order to utilize the maximum ability of E-beam system, firstly, we reduced the PR thickness to 100nm, and the field size to 200 ${um}m$. Then PEB (Post Expose Bake) time/temperature, which is one of the very important factors when SAL601 is used, were reduced for minimum line width. In addition, digitizing is optimized for better results. Quantum wire and quantum dot which can be used for nanoscale memory device, such as single electron memory device, are fabricated using these developed lithography techniques.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.332-341
• /
• 1998

Conventional polishing of stone panel edges has been done by hand. While this has changed somewhat with the advent of automatic machines, it is still very much a hand finishing technology. For the development of edge shape milling tool, the primary test on characteristics of edge shape milling tool was carried out. This paper presents the results of tests focused upon the milling capability that was varied by the variables of operation parameters. Author tried to confirm the effect of six operation parameters of equipment such as rotation speed, advance speed, applied load, water flow rate and rotational direction. The result from test was described in term of shape milling capability that was defined as cutting volume of rock by unit weight of tool wear. The variance of the results could indicate the optimum level of each operating parameters. The test was also carried out to determine the abrasion resistance varied according to the abrasive flow rate. The abrasion resistance was increased with the abrasive flow rate, but over some rate it was not changed.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.