• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.62.2-62.2
• /
• 2011

산업화 이후, 석탄 석유를 중심으로 한 화석연료가 이산화탄소를 대량으로 배출하며 지구 온난화를 야기함에 따라, 기존의 화석연료를 대체할 청정하고 무한 재생 가능한 대체에너지로 가장 큰 기대를 받고 있는 것은 태양에너지이며, 이에 보조를 맞춰 태양광발전에 대한 연구개발이 국내외적으로 활발히 진행되고 있는 실정이다. 태양 전지는 빛 에너지를 직접 전기 에너지로 바꿔주는 소자로, 셀의 효율을 높이기 위해서는 최대한 많은 빛을 흡수시킬 수 있는 것이 중요하다. 빛의 반사를 줄이는 방법에는 texturing과 antireflecting coating이 있다. Antireflecting coating은 반도체와 공기의 중간 굴절율을 갖는 박막을 증착하여 측면 반사를 감소시킴으로서 빛의 손실을 감소시키는 역할을 한다. 과거에 반사방지막으로 가장 많이 사용되었던 물질은 SiO로써 굴절률은 1.8~1.9로서 최소의 반사율은 1% 미만이지만, 가시광선영역에서의 흡수에 의한 손실이 생기므로, SiNx가 대체 물질로 제안되었다. SiNx의 경우 굴절률이 약 1.5로서 Si에 쉽게 형성시킬 수 있고, texturing된 Si 표면에 적합하며 반사율을 10%에서 2%로 줄일 수 있는 장점을 가지고 있다. 따라서 본 연구에서는 high power, high frequency PECVD 방법으로 $SiH_4$와 $NH_3$ gas의 비율, $N_2$ carrier gas 등 공정 변수를 변화시켜 증착한 SiNx 박막의 결정학적 특성을 X-ray diffraction 분석과 XPS (X-ray photoelectron spectroscopy)를 통해 화학적 결합을 확인하였고, 이를 FT-IR (Fourier Transform-Infrared spectroscopy)를 통해 관찰한 결과와 연관시켜 분석하였다. 굴절율의 경우 ellipsometer를 이용하여 측정하였으며 위의 측정을 통하여 SiNx박막의 반사 방지막으로써의 가능성을 확인 하였다.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.511-515
• /
• 2007

The yield of oil was rapidly increased at $440^{\circ}C$ compared to $400^{\circ}C$ and $420^{\circ}C$ when the isothermal pyrolysis of waste ship lubricating oil was carried out in tubular type reactor, and pyrolysis was almost finished within 30 min. The yield of gas was decreased depending on the reaction temperature in which that of solid was not much changed. Pyrolysis experiments of waste ship lubricating oil were carried out with used ZSM-5 produced from a petrochemical process. The yield of gas was highly increased in the case of used ZSM-5 and fresh ZSM-5 compared to the case without catalyst. The produced oil and gas were almost constant for fresh ZSM-5 and used ZSM-5 at the same reaction temperature. In the reaction temperature $400{\sim}440^{\circ}C$, the selectivity of $C_5-C_{11}$ was two times higher with fresh ZSM-5 and used ZSM-5 than the case without catalyst.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.177-185
• /
• 2012

The interest to develop adhesives from renewable resources is growing to substitute petroleum-based adhesive resins in the manufacture of wood based panels. In our study, rapeseed flour (RSF), which is the by-product of bio-diesel produced from rapeseed, were hydrolyzed with acid and alkali. As a crosslinking agents of the RSF hydrolyzates, phenol-formaldehyde prepolymers (PF) were prepared. The RSF hydrolyzates and PF were mixed to complete the formulation of RSF-based adhesive resins, and the resins were applied to make the medium density fiberboard (MDF). The physical and mechanical properties of the MDF were measured to examine whether RSF can be used as raw materials of adhesive resins for the manufacture of MDF or not. The average moisture content and density of the MDF made with RSF-based adhesive resins satisfied the minimum requirement of KS standard, but the thickness swelling was not. The bending strengths of the MDF made with RSF-based adhesive resins were lower than that of the MDF made with commercial UF resins, but the internal bonding strengths of tested MDF in some make-up conditions of RSF-based adhesive resins were higher than that of MDF made with commercial UF resins. These results showed the potential of RSF as a raw material of adhesives for the production of MDF. Future works on the optimal manufacturing process conditions of MDF made with RSF-based adhesive resins are required to improve the performance of MDF made with RSF-based resins.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.885-893
• /
• 2014

This research reports the enhanced Electrokinetic (EK) with $H_2O_2$ and sodium dodecyl surfate (SDS), which are commonly used in Fenton oxidation and soil flushing method, in order to remediate soil contaminated with heavy metals and Total Petroleum Hydrocarbons (TPH) simultaneously. In addition, influences of property of soil and concentration of chemical solution were investigated through experiments of different types of soils and varying concentration of chemical reagents. The results indicated, in the experiments using artificially contaminated soil, the highest removal efficiency of heavy metals using 10% $H_2O_2$ and 20mM SDS as electrolytes. However, in the experiments using Yong-San soils (study area), remediation efficiency of heavy metals was decreased because high acid buffering capacity. Through experiment of 20% $H_2O_2$ and 40mM SDS, increased electric current influences the remediation of heavy metals due to decrease in the soil pH. In the experiments of Yong-San soils, the remediation efficiency of TPH was decreased compared with artificially spiked soils because high acid buffering capacity and organic carbon contents. Furthermore, the scavenger effect of SDS influenced TPH oxidation efficiency under the conditions of injected 40mM SDS in the soils. Therefore, the property of soil and concentration of chemical reagents cause the electroosmotic flow, soil pH, remediation efficiency of heavy metals and TPH.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.82-83
• /
• 1996

키토산 막을 이용한 유기혼합물 중의 물을 효율적으로 분리해내는 투과증발공정은 많은 발전을 거듭해 왔으며, 특히 에탄올중의 물을 효율적으로 탈수하는 것에는 탁월한 성능을 보고한 바 있다. 키토산은 주로 게등의 갑각류의 외피에서 얻을 수 있는 키닌을 주원료로 하는 물질로서 친수성이 뛰어난 막재료뿐만 아니라 생체적 합성이 요구되는 생체재료로도 널리 사용이 되고 있는 물질이다. 에틸렌즐리콜은 석유화학공정에서 생성되는 에틸렌 옥시이드를 원료로 하여 제조가 되고 있는 물질이다. 에틸렌글리콜은 PET의 원료로서 사용이 많이 되고 있으며, 겨울철에는 자동차등의 부동액이나 눈이 많이 내리는 지역에서 효율적으로 눈을 제거하기 위하여 공항의 활주로등에서 주로 사용이 되고 있는 물질이다. 에틸렌글리콜의 제조공정중에서 물을 효과적으로 제거하는 방법으로는 증류법이 있을 수 있으나 에틸렌글리콜의 비점이 물보다 현저히 높기 때문에, 공비혼합물을 생성하지 않는 이 혼합물의 특성과는 무관하게, 투과증발법을 이용할 경우 에너지의 절감이 이루어지게 되기 때문에 매우 효용적이고 추천할만할 공정이다. 또한 활주로의 부동액등으로 사용되는 경우 에틸렌글리콜의 재활용이 이루어질 경우 경비의 절감이나 환경적인 문제의 해결등의 장점이 있어서 물의 분리가 요구되고 있다. 이 경우에는 마찬가지로 에틸렌글리콜과 물의 분리는 일반적인 분리에 비해서 투과증발법이 유용하다고 할 수 있다. 본 실험에서는 키토산 막의 효율적인 응용예로서 기존의 알콜의 탈수와 더불어서 에틸렌글리콜의 탈수를 고찰해보고자 하였다.관리가 간편하며, 용존산소량을 줄일수 있다는 점에서 장점이 있으나, 전 ultra pure water의 system이 열적으로 안정해야 하고 경제적인 문제가 수반하는 단점을 가지고 있다. 후자의 경우, 미량의 과산화수소수 (1~10,000 ppm)를 이용해 처리 해주는 방법의 경우 경제적으로 큰 장점이 있고, 처리가 단순하다는 장점이 있으나 과산화수소수 자체에 포함하고 있는 높은 impurit level, 그리고 처리후 장시간의 flushing time을 가져야 한다는 단점등이 존재 하고 있다.요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.826-833
• /
• 2014

Driven by both environmental and economic reasons, the development of small to medium scale GTL(gas-to-liquid) process for offshore applications and for utilizing other stranded or associated gas has recently been studied increasingly. Microchannel GTL reactors have been prefrered over the conventional GTL reactors for such applications, due to its compactness, and additional advantages of small heat and mass transfer distance desired for high heat transfer performance and reactor conversion. In this work, multi-microchannel reactor was simulated by using commercial CFD code, ANSYS FLUENT, to study the geometric effect of the microchannels on the heat transfer phenomena. A heat generation curve was first calculated by modeling a Fischer-Tropsch reaction in a single-microchannel reactor model using Matlab-ASPEN integration platform. The calculated heat generation curve was implemented to the CFD model. Four design variables based on the microchannel geometry namely coolant channel width, coolant channel height, coolant channel to process channel distance, and coolant channel to coolant channel distance, were selected for calculating three dependent variables namely, heat flux, maximum temperature of coolant channel, and maximum temperature of process channel. The simulation results were visualized to understand the effects of the design variables on the dependent variables. Heat flux and maximum temperature of cooling channel and process channel were found to be increasing when coolant channel width and height were decreased. Coolant channel to process channel distance was found to have no effect on the heat transfer phenomena. Finally, total heat flux was found to be increasing and maximum coolant channel temperature to be decreasing when coolant channel to coolant channel distance was decreased. Using the qualitative trend revealed from the present study, an appropriate process channel and coolant channel geometry along with the distance between the adjacent channels can be recommended for a microchannel reactor that meet a desired reactor performance on heat transfer phenomena and hence reactor conversion of a Fischer-Tropsch microchannel reactor.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.29-34
• /
• 2009

This study was performed under four operational conditions for nitrogen removal in metal finishing wastewater. The conditions include electrode gap, reducing agent, the recycling of treated wastewater in 1st step and the simultaneous treatment of nitrate and other materials. Result showed that the removal efficiency of $NO_3{^-}-N$ was highest at the electrode gap of 10 mm. As the electrode gap was shorter than 10 mm, the removal efficiency of $NO_3{^-}-N$ decreased due to increasing in concentration polarization on electrode. And, in case that the electrode gap was longer than 10 mm, the removal efficiency of $NO_3{^-}-N$ increased with an increase in energy consumption. Because hydrogen ions are consumed when nitrate is reduced, reducing reaction of nitrate was effected more in acid solution. As 1.2 excess amount of zinc was injected, the removal efficiency of $NO_3{^-}-N$ increased due to increasing in amount of reaction with nitrate. As the effluent from 1st step in the reactor was recycled into the 1st step, the removal efficiency of $NO_3{^-}-N$ increased. Because the zinc were detached from the cathode and concentration-polarization was decreased due to formation of turbulence in the reactor. The presence of $NH_4{^+}-N$ did not affect the removal efficiency of $NO_3{^-}-N$ but the addition of heavy metal decreased the removal efficiency of $NO_3{^-}-N$. As chlorine is enough in wastewater, the simultaneous treatment of nitrate and ammonia nitrogen may be possible. The problem that heavy metal decrease the removal efficiency of $NO_3{^-}-N$ may be solved by increasing current density or using front step of electrochemical process for heavy metal removal.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.63-70
• /
• 2010

Transition metal based spent catalysts (Ni-Mo and Co-Mo), which were scrapped from the petrochemical industry, were reused for the removal processes of volatile organic compounds (VOCs). Especially the optimum regeneration procedures were determined using the removal efficiency of VOCs. In this work, the spent Ni-Mo and spent Co-Mo catalysts were pretreated with different physic-chemical treatment procedure: 1) acid aqueous solution, 2) alkali solution, 3) chemical agent and 4) steam. The various characterization methods of spent and its regenerated catalysts were performed using nitrogen adsorption, X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with an energy dispersive spectrometry (EDS). It was found that all spent catalysts were found to be potentially applicable catalysts for catalytic oxidation of benzene. The experimental results also indicated that among the employed physico-chemical pretreatment methods, the oxalic acid aqueous (0.1 N, $C_2H_2O_4$) pretreatment appeared to be the most efficient in increasing the catalytic activity, although the catalytic activity of spent Ni-Mo and spent Co-Mo catalysts in the oxidation of benzene were greatly dependent on the pretreatment conditions. The pretreated spent catalysts at optimum condition could be also applied for removing other aromatic compounds (Toluene/Xylene).

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.678-683
• /
• 2012

Ceria is one of the most important catalytic materials which can be used in three-way catalysts, waste water treatment, petroleum refining, etc. So far, many methods have been studied to produce ceria nanoparticles. In this study, ceria nanoparticles were prepared via solvothermal synthesis using supercritical methanol in short reaction time using a batch reactor. The size of synthesized ceria nanoparticles in supercritical methanol is 6 nm without capping agent, which is smaller than that made in supercritical water at the same conditions of $400^{\circ}C$ and 30 MPa. Size difference results from density and critical point difference between water and methanol and slow reaction rate at the surface of ceria particles in supercritical methanol which reduces crystal growth rate. Several organic compounds were added to modify the surface of ceria nanoparticles, and in-situ surface modification was confirmed by FT-IR and TGA analysis. Surface modified ceria nanoparticles have excellent dispersibility in organic solvent. Size and shape of surface modified ceria particles can be controlled by adjusting molar ratio of modifier to precursor and selection of modifier.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.279-284
• /
• 2015

As non-conventional oil resources such as shale gas have been widely developed, proper treatment of flowback and produced water is becoming important. However, application of conventional water treatment techniques is limited due to high concentration of pollutants such as oil and grease, organics, harmful chemicals, and inorganic ions. In this study, we examined the feasibility of using forward osmosis (FO) and air gap membrane distillation (AGMD) as novel treatment options for shale gas wastewater. Laboratory-scale FO and MD devices were fabricated and used for the experiments. Results showed that FO could be used to treat the synthetic wastewater. Using 5 M NaCl as the draw solution, the flux was approximately $6L/m^2-hr$ during the treatment of low range wastewater (TDS: 66,000 mg/L). Nevertheless, AGMD was more effective to treat high range wastewater (Total Dissolved Solid: 260,000 mg/L) than FO.