DOI QR코드

DOI QR Code

전산유체역학을 이용한 Fischer-Tropsch 마이크로채널 반응기의 채널 구조 영향 분석

Computational Fluid Dynamics Study of Channel Geometric Effect for Fischer-Tropsch Microchannel Reactor

  • 나종걸 (서울대학교 화학생물공학부) ;
  • 정익환 (서울대학교 화학생물공학부) ;
  • ;
  • 박성호 (서울대학교 화학생물공학부) ;
  • 박찬샘 (서울대학교 화학생물공학부) ;
  • 한종훈 (서울대학교 화학생물공학부)
  • Na, Jonggeol (School of chemical and biological engineering) ;
  • Jung, Ikhwan (School of chemical and biological engineering) ;
  • Kshetrimayum, Krishnadash S. (School of chemical and biological engineering) ;
  • Park, Seongho (School of chemical and biological engineering) ;
  • Park, Chansaem (School of chemical and biological engineering) ;
  • Han, Chonghun (School of chemical and biological engineering)
  • 투고 : 2014.04.01
  • 심사 : 2014.05.14
  • 발행 : 2014.12.01

초록

해양 중소규모 가스전의 경제성에 대한 화두가 던져진 이후 전통 석유의 가격변동과 세계적인 환경규약 등에 맞물려 석유화학관련 산업계에서는 이를 효과적으로 대처하고 천연가스를 활용할 수 있는 공정을 개발하고자 하였다. 이에 Fischer-Tropsch 반응을 기반으로 하는 해상 GTL 공정(offshore gas-to-liquid process)이 제안되었고 부유시스템 platform으로 공정을 적용시키고자 마이크로채널 반응기가 떠오르고 있다. 본 논문에서는 단일 마이크로채널 반응기를 Fischer-Tropsch 반응을 기반으로 하여 Matlab과 ASPEN Hysys를 연동하여 모사하고 이로 얻어진 반응열을 도입해 상용 전산유체역학(computational fluid dynamics, CFD) 소프트웨어인 ANSYS fluent로 멀티 마이크로채널 반응기 모델을 제작하였다. 그리고 4가지의 설계변수인 냉각채널 넓이, 높이, 냉각채널과 반응채널의 간격, 냉각채널 간의 간격을 설정하고 이들의 변화에 따른 열유동을 3가지의 변수인 열유속, 냉각 및 반응채널의 최대온도의 변화를 시각화하여 그 경향성을 확인하였다. 경향성 분석 결과, 냉각채널의 넓이와 높이는 짧을수록 총 열유속이 높아졌으며 최대온도 역시 높아졌으나 냉각채널과 반응채널의 간격은 열유동에 거의 영향을 미치지 못하였다. 냉각채널 간의 간격은 짧을수록 총 열유속이 높아졌으며 최대온도는 낮아졌다. 따라서 적절한 냉각채널의 넓이와 높이를 제안하고 짧은 간격의 냉각채널 구조를 도입하여 반응채널의 열량을 충분히 제거할 수 있는 반응기설계에 대한 휴리스틱을 제안할 수 있었다. 이처럼 멀티채널 반응기의 모델을 설계하고 이로부터 적절한 변수를 선택해 그 경향성을 확인할 수 있는 방법을 통해 설계 단계에서부터 적절한 반응기 구조에 대한 제안을 하는데 도움을 줄 것이다.

Driven by both environmental and economic reasons, the development of small to medium scale GTL(gas-to-liquid) process for offshore applications and for utilizing other stranded or associated gas has recently been studied increasingly. Microchannel GTL reactors have been prefrered over the conventional GTL reactors for such applications, due to its compactness, and additional advantages of small heat and mass transfer distance desired for high heat transfer performance and reactor conversion. In this work, multi-microchannel reactor was simulated by using commercial CFD code, ANSYS FLUENT, to study the geometric effect of the microchannels on the heat transfer phenomena. A heat generation curve was first calculated by modeling a Fischer-Tropsch reaction in a single-microchannel reactor model using Matlab-ASPEN integration platform. The calculated heat generation curve was implemented to the CFD model. Four design variables based on the microchannel geometry namely coolant channel width, coolant channel height, coolant channel to process channel distance, and coolant channel to coolant channel distance, were selected for calculating three dependent variables namely, heat flux, maximum temperature of coolant channel, and maximum temperature of process channel. The simulation results were visualized to understand the effects of the design variables on the dependent variables. Heat flux and maximum temperature of cooling channel and process channel were found to be increasing when coolant channel width and height were decreased. Coolant channel to process channel distance was found to have no effect on the heat transfer phenomena. Finally, total heat flux was found to be increasing and maximum coolant channel temperature to be decreasing when coolant channel to coolant channel distance was decreased. Using the qualitative trend revealed from the present study, an appropriate process channel and coolant channel geometry along with the distance between the adjacent channels can be recommended for a microchannel reactor that meet a desired reactor performance on heat transfer phenomena and hence reactor conversion of a Fischer-Tropsch microchannel reactor.

키워드

참고문헌

  1. Oxford Catalysts Group PLC., Technical experts' report on the Velocys technology prepared by Nexant, Inc., 27(2008).
  2. Jun, K.-W., "GTL: Manufacturing Technology of Natural Gas to Synthetic Crude Oil," KCS, 36(3), 8-15(2009).
  3. TOYO EGINEERING., "Offshore GTL Process Development By Microchannel Reactor," Automation Systems, 8, 82-88(2012).
  4. Jarosch, K. T., Tonkovich, A. L. Y., Perry, S. T., Kuhlmann, D. and Wang, Y., "Microchannel Reactors for Intensifying Gas-toliquid Technology," ACS Symp. Ser., 914, 258-272(2005).
  5. Bajus, M., "Microchannel-Technologies," Petroleum & Coal, 54, 294-300(2012).
  6. Wang, Y., Vanderwiel, D. P., Tonkovich, A. L. Y., Gao, Y. and Baker, E. G., "Catalyst Structure and Method of Fischer-tropsch Synthesis," U.S. Patent No. 6, 451, 864(2002).
  7. Arzamendi, G., Dieguez, P. M., Montes, M., Odriozola, J. A., Falabella Sousa-Aguiar, E. and Gandia, L. M., "Computational Fluid Dynamics Study of Heat Transfer in a Microchannel Reactor for Low-temperature Fischer-Tropsch Synthesis," Chem. Eng. J., 160, 915(2010). https://doi.org/10.1016/j.cej.2009.12.028
  8. Kandlikar, S. G. and Upadhye, H. R., "Extending the Heat Flux Limit with Enhanced Microchannels in Direct Single-phase Cooling of Computer Chips," Semiconductor Thermal Measurement and Management Symposium 2005 IEEE Twenty First Annual IEEE, 8-15(2005).
  9. An, H., Li, A., Sasmito, A. P., Kurnia, J. C., Jangam, S. V. and Mujumdar, A. S., "Computational Fluid Dynamics (CFD) Analysis of Micro-reactor Performance: Effect of Various Configurations," Chem. Eng. Sci., 75, 85(2012). https://doi.org/10.1016/j.ces.2012.03.004
  10. Kusakabe, K., Morooka, S. and Maeda, H., "Development of a Microchannel Catalytic Reactor System," Korean J. Chem. Eng., 18, 271(2001). https://doi.org/10.1007/BF02699164
  11. Yand, J.-I., Chun, D. H., Park, J. C. and Jung, H., "Kinetic Study of the Fischer-Tropsch Synthesis and Water Gas Shift Reactions over a Precipitated Iron Catalyst," Korean Chem. Eng. Res., 50, 358(2012). https://doi.org/10.9713/kcer.2012.50.2.358
  12. Guettel, R. and Turek, T., "Comparison of Different Reactor Types for Lowtemperature Fischer-Tropsch Synthesis: A Simulation Study," Chem. Eng. Sci., 64(5), 955-964(2009). https://doi.org/10.1016/j.ces.2008.10.059
  13. Derevich, I. V., Ermolaev, V. S., Mordkovich, V. Z. and Galdina, D. D., "Simulation of Fluid Dynamics in a Microchannel Fischer-Tropsch Reactor," Theor. Found. Chem. Eng., 46(1), 8-19(2012). https://doi.org/10.1134/S0040579512010022
  14. Van der Laan, G. P. and Beenackers, A. A. C. M., "Kinetics and Selectivity of the Fischer-Tropsch Synthesis: A Literature Review," Cat. Rev. Sci. Eng., 41(3-4), 255-318(1999). https://doi.org/10.1081/CR-100101170
  15. Yates, I. C. and Satterfield, C. N., "Intrinsic Kinetics of the Fischer-Tropsch Synthesis on a Cobalt Catalyst," Energy Fuels, 5(1), 168-173(1991). https://doi.org/10.1021/ef00025a029
  16. Atashi, H., Siami, F., Mirzaei, A. A. and Sarkari, M., "Kinetic study of Fischer-Tropsch Process on Titania-supported Cobaltmanganese Catalyst," J. Ind. Eng. Chem., 16(6), 952-961(2010). https://doi.org/10.1016/j.jiec.2010.04.005
  17. Fazlollahi, F., Sarkari, M., Zare, A., Mirzaei, A. A. and Atashi, H., "Development of a Kinetic Model for Fischer-Tropsch Synthesis over $Co/Ni/Al_2O_3$ Catalyst," J. Ind. Eng. Chem., 18(4), 1223-1232(2012). https://doi.org/10.1016/j.jiec.2011.10.011
  18. Krishna, K. R. and Bell, A. T., "Estimates of the Rate Coefficients for Chain Initiation, Propagation, and Termination during Fischer-Tropsch Synthesis over $Ru/TiO_2$," J. Catal., 139(1), 104-118(1993). https://doi.org/10.1006/jcat.1993.1011
  19. Knochen, J., Guttel, R., Knobloch, C. and Turek, T., "Fischertropsch Synthesis in Milli-structured Fixed-bed Reactors: Experimental Study and Scale-up Considerations," Chem. Eng. Process., 49, 958(2010). https://doi.org/10.1016/j.cep.2010.04.013
  20. Post, M., Van't Hoog, A., Minderhoud, J. and Sie, S., "Diffusion Limitations in Fischer-tropsch Catalysts," AIChE J., 35, 1107(1989). https://doi.org/10.1002/aic.690350706
  21. Menter, F. R., "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications," AIAA J., 32, 1598(1994). https://doi.org/10.2514/3.12149
  22. Derevich, I. V., Ermolaev, V. S. and Mordkovich, V. Z., "Liquid-Vpor Thermodynamic Equilibrium in Fischer-Tropsch Synthesis Products," Theor. Found. Chem. Eng., 42, 216(2008). https://doi.org/10.1134/S0040579508020152
  23. Lee, C.-J., Lim, Y., Kim, H. S. and Han, C., "Optimal Gas-To-Liquid Product Selection from Natural Gas under Uncertain Price Scenarios," Ind. Eng. Chem. Res., 48, 794(2008).
  24. Derevich, I. V., Ermolaev, V. S., Zol'nikova, N. V. and Mordkovich, V. Z., "Thermodynamics of Wax Formation in the Fischer-Tropsch Synthesis Products," Theor. Found. Chem. Eng., 47, 191(2013). https://doi.org/10.1134/S0040579513020024

피인용 문헌

  1. Analysis on Thermal Effects of Process Channel Geometry for Microchannel Fischer-Tropsch Reactor Using Computational Fluid Dynamics vol.53, pp.6, 2015, https://doi.org/10.9713/kcer.2015.53.6.818
  2. Computational Fluid Dynamics Based Optimal Design of Guiding Channel Geometry in U-Type Coolant Layer Manifold of Large-Scale Microchannel Fischer–Tropsch Reactor vol.55, pp.2, 2016, https://doi.org/10.1021/acs.iecr.5b03313
  3. CFD Simulation of Microchannel Reactor Block for Fischer–Tropsch Synthesis: Effect of Coolant Type and Wall Boiling Condition on Reactor Temperature vol.55, pp.3, 2016, https://doi.org/10.1021/acs.iecr.5b03283
  4. 철 기반 촉매의 Fischer-Tropsch 합성에서 γ-Al2O3/SiO2 혼합 지지체 조성의 영향 vol.55, pp.3, 2014, https://doi.org/10.9713/kcer.2017.55.3.436