• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1873-1878
• /
• 2013

ITZO ($In_2O_3$ : $SnO_2$ : ZnO = 90wt.% : 5wt.% : 5wt.%) thin films were fabricated on glass substrates (Eagle 2000) at room temperature with various working pressures (1~7 mTorr) by RF magnetron sputtering. The influence of the working pressure on the structural, electrical, and optical properties of the ITZO thin films were investigated. The XRD and FESEM results showed that all ITZO thin films are amorphous structures with very smooth surfaces regardless of the working pressure. Amorphous ITZO thin films deposited at 3 mTorr showed the best properties, such as a low resistivity, high transmittance, and figure of merit of $3.08{\times}10^{-4}{\Omega}{\cdot}cm$, 81 %, and $10.52{\times}10^{-3}{\Omega}^{-1}$, respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.10
• /
• pp.975-983
• /
• 2009

This paper presents the work being carried out in order to deduce hover performance of a small-scale single rotor blade as a preliminary study of a small coaxial rotor helicopter development. As an initial research, a test stand capable of measuring thrust and torque of a small-scale rotor blade in hover state was constructed and fabricated. The test stand consists of three parts; a rotating device, a load measuring sensor and a data acquisition system. Thrust and torque were measured with varying collective pitch angle at fixed RPM. Through this research, hover performance tests were conducted for a small-scale single rotor blade operating in low Reynolds number ($Re\;{\approx}3{\times}10^5$), as well as for verifying the test stand itself for acquiring hover performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.699-708
• /
• 2021

In this paper, a steering control and speed control algorithm was presented for autonomous driving based on two vision sensors and road speed sign board. A car speed control algorithm was developed to recognize the speed sign by using TensorFlow, a deep learning program provided by Google to the road speed sign image provided from vision sensor B, and then let the car follows the recognized speed. At the same time, a steering angle control algorithm that detects lanes by analyzing road images transmitted from vision sensor A in real time, calculates steering angles, controls the front axle through PWM control, and allows the vehicle to track the lane. To verify the effectiveness of the proposed algorithm's steering and speed control algorithms, a car's prototype based on the Python language, Raspberry Pi and OpenCV was made. In addition, accuracy could be confirmed by verifying various scenarios related to steering and speed control on the test produced track.

• Clinical Pain
• /
• v.19 no.1
• /
• pp.54-58
• /
• 2020

Skeletal muscle metastasis of gastric cancer is extremely rare and is associated with various symptoms. Here, we report on a 60-year-old woman with right hip pain after excessive walking. Two years earlier, the patient had been treated for advanced gastric cancer (surgery, adjuvant chemotherapy). Upon magnetic resonance imaging, diffuse muscle swelling and high signal intensity were observed in T2-weighted images of the right hip muscle. However, the FDG uptake in the right gluteal muscles was not obviously increased. Pathological examination of muscle biopsy revealed metastatic adenocarcinoma of stomach origin. The patient was treated with chemotherapy, and the swelling and pain in the right hip are progressively improving.

• Journal of Oriental Neuropsychiatry
• /
• v.35 no.1
• /
• pp.1-13
• /
• 2024

Objectives: This study aims to develop an educational program based on a manual for disaster medical support using Korean medicine (KM) for disaster survivors. Methods: We conducted a literature review on another educational program, a focus group interviews with experts, a survey of the academic needs of Korean medicine (KM) doctors, educational competency development, and an expert Delphi survey. Results: This program was designed using a hybrid method combining online (4 h) and offline (8 h) elements; the total time of the program is 12 h. The offline course consists of theory (4 h) and practice (4 h) lectures. The theory lecture covers herbal medicine, acupuncture, stabilizing technique, emotional freedom technique, and self-management, and the practice lecture covers stabilizing technique, emotional freedom technique, and clinical performance evaluation. Meanwhile, the online course covers a manual for disaster medical support using KM and an introductory course from the National Center for Disaster and Trauma. Conclusions: The results of this study are expected to be useful for enhancing training for KM doctors in trauma care for disaster survivors as well as evaluating and validating the program's effectiveness.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.41-44
• /
• 2000

Fermentation characteristics of recombinant Saccharomyces cerevisiae containing the xylose reductase gene from Pichia stipitis were analyzed in an attempt to convert xylose to xylitol, a natural five-carbon sugar alcohol used as a sweetener. Xylitol was produced with a maximum yield of 0.95 (g xylitol/g xylose consumed) in the presence of glucose that is used as a cosubstrate for cofactor regeneration. However addition of glucose caused inhibition of xylose transport and accumulation of ethanol. Such problems were solved by adopting glucose-limlted fed-batch fermentation. This process done with S, cerevisiae EHl3.15:pY2XR at$30\;^{\circ}C$ resulted in 105.2g/L xylitol concentration with maximum productivity of 1.69 g $L^{-1}$ $hr^{-1}$.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.351-354
• /
• 2001

In this experiment, we tested various nitrogen sources and then culture condition was optimized for industrial applications. The batch culture of Candida magnoliae SR101 grown in a defined medium supplemented with light steep water (LSW) as a sole nitrogen source showed a relatively high yield of erythritol production (53%), which was slightly higher than that using yeast extract as a nitrogen source, while the productivity and cell mass were maintained at similar levels. For the optimization of culture condition, the batch culture was performed. When the concentration of LSW was 65 mL/L in the defined medium containing 250 g/L of glucose, the concentration, yield and productivity of erythritol were 110 g/L, 44%, and 0.66 g/L-hr, respectively. The high yield and comparable productivity obtained with a cheap nitrogen source could be expected as a basis for the mass production of erythritol in the industrial scale.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.374-377
• /
• 2001

On the basis of high-osmotic tolerance and xylitol productivity, it was isolated a novel strain from soil of rice field. An isolated strain was tentatively designated as Candida sp. HY200, deduced from the systematic approaches of bacterial identification by Biolog $Microlog^{TM}$ and, revealed an interesting ability of flocculation during the cultivation. With respect to the osmotic-tolerance and flocculation ability, experiment was carried out to investigate the production of xylitol in high xylose concentration. When xylose concentration was 260 g/L, it was obtained 205 g/L xylitol with 79% of yield and 2.14 g/L ${\cdot}$ h of productivity Consequently, We convinced that Candida sp. HY200 stands a very favorable comparison with C. tropicalis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.25-32
• /
• 1994

The pre-processor for finite to element structural analysis considering the user-friendly device is developed by using GUI. This can be used on WINDOWS' environment which is realized the multi-tasking and the concurrency by object-oriented paradigm. Data input can be done easily through menu, dialog box, automatic stepwise input and concurrent representation with the structural geometry on multiple windows. It in designed to control integratedly the pre-processing, execution and the post-processing of the finite element structural analysis program on multiple windows, and input data can be seen with result outputs at the same time. In addition, the object-oriented programming environment makes convenient revision and addition of the program components for expanding the scope of analysis and making better user environment.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.255-258
• /
• 1999

Effects of growth conditions on the growth of Zoogloea ramigera and the production of zooglan were investigated. The production of zooglan was greatly reduced in the phosphate-limiting medium. $NH_4Cl$ and ${(NH_4)}_2SO_4$ improved cell growth when they were used as a nitrogen source. The medium containing 45 g/L of glucose and 27 g/L of $NaNO_3$ resulted in the highest production of zooglan at 18.5 g/L.