• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.7-7
• /
• 1997

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.215-221
• /
• 2002

In high speed optical disc devices, the vibration caused by unbalanced displacement leads the focus and tracking servo systems to be unstable, and increases the data search time. In this paper, we propose a new scheme to solve the unbalanced displacement problem. The proposed method detects the unbalanced rate by differential amplifying optical power received at photo diode and converts it into an electrical signal. controlling the speed of spindle motor, according to the detected unbalanced rate, makes it possible to improve the performance of tracking and data searching tasks. Also, we analyze the dynamic characteristics of focus and tracking servo systems in high speed mode and provide the firmware and hardware architecture that the proposed method can be installed as an add-on- module in the existing system.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.362-368
• /
• 1997

기존의 저배속, 저밀도의 광디스크 드라이브에서 데이터를 재생할 때 진동과 소음의 제어는 상대적으로 용이하였으나, 고배속.고밀도의 광디스크 드라이브에서의 진동과 소음문제는 광디스크 드라이브 개발의 심각한 장애로 대두되고 있다. 고배속.고밀도 광디스크 드라이브에서 트랙과 초점의 벗어남(off-track과 off-focusing)에 의한 작동오류를 서보제어 기술로만 극복하는 것은 거의 불가능하다. 따라서 진동제어에 의한 광디스크 드라이브의 동적 안정성 확보는 신뢰성 있는 광디스크 드라이브의 개발에 필수적이다. 이와 동시에 정숙한 컴퓨터 개발 추세에 따라 저소음 광디스크 드라이브의 개발이 요구되고 있다. 왜냐하면, 배속수가 증가함에 따라 소음의 크기도 증가하기 때문이다. 과거의 광디스크 드라이브의 진동.소음 문제가 크게 부각되지 않았으나 고배속.저밀도의 광디스크 드라이브의 개발에 따라 진동. 소음에 대한 연구의 필요성이 증대할 것이다. 따라서 본 글에서 광디스크 드라이브의 구조 및 작동원리, 그리고 소음 진동 문제를 소개하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1341-1344
• /
• 2007

최근에 노트북 컴퓨터의 가격 하락과 더불어 보급이 급속도로 확산되고 있다. 노트북 컴퓨터 간의 경쟁에서 얼마나 더 얇고 가볍게 만들 수 있는가는 가치 차별화의 근간이 된다. 따라서 노트북 컴퓨터의 박형화에서 HDD 나 ODD 같은 핵심 주변장치의 박형화는 핵심 이슈이다. 본 논문에서는 기존 노트북용 박형 광저장장치의 엑추에이터 개발에 있어서 보다 안정적인 제어가 될 수 있는 구조를 소개하고 엑추에이터의 실제 데이터를 이용하여 서보 제어에 있어서의 설계마진을 고찰해 보고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2092-2099
• /
• 2013

Through the data transfer race in industry since 1990s, the operational speed of optical disk drive(ODD) becomes commonly over 10,000 rpm. Such high speed operation inevitably causes the vibration, which is also the disturbances in the read-write process of pick-up servo-controller. Generally the vibration disturbance problem can be solved by the vibration isolation using the rubber mount and the increase of robustness of the pick-up servo-controller. Optical disk itself has not been targeted for the vibration reduction, because it is manufactured under the standardized format. In this paper we focused on the increase of critical speed of optical disk, that is, the improvement of dynamic characteristics, with the control of residual stresses which are come from the injection molding process. To do this, first, the residual stresses induced from the injection molding process are calculated using finite element method. The major design parameters of the process conditions are flow rate and melt temperature, which control the residual stresses in optical disk. Second, the critical speed of optical disk is calculated with modal analysis considering residual stress distributions. It was found out that the critical speed can be improved by the control of operational parameters in the injection molding process.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.414-415
• /
• 2005

• ICROS
• /
• v.13 no.2
• /
• pp.27-33
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.346-350
• /
• 1996

In optical disk drives, one of commonly used pickup actuator is a Sliding and rotary type of pickup actuator which is cheaper than other pickup actuators and has simple assembly. However, it reported that non-linearity due to friction between a shaft and a sleeve had to be considerably analyzed in design and servo system in employing this type of pickup actuator. In this paper, this friction is modeled as a Coulomb's friction and the effect of friction is examined in the simulation. A digital servo system is applied to pickup actuator with friction in order to have good focusing servo. To enhance focusing servo performance using digital servo merit, frist PD-controller is applied to have fast response performance, second lead-lag compensator is applied to have stable focusing performance.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.386-387
• /
• 2009

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.388-389
• /
• 2009