• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.208-209
• /
• 2009

전남 서남권은 동남권 지역에 이어 제 2의 조선산업 클러스터를 위한 산업기반 구축이 진행되고 있다. 전남 조선산업의 유연성과 불황기 대처능력을 제고하고 한국 및 전남권의 항만 개발에 따른 수리조선 수요에 대처하기 위해, 전라남도는 수리조선산업 진출을 검토하고 있는 바, 전남 지역의 수리조선 경쟁력을 분석하였다. 수리조선산업의 산업적 특정과 수리조선 수요 결정 요인을 고찰하고, 유럽, 싱가포르, 중동, 중국 등 주요 수리조선국 사례의 시사점을 토대로 전라남도의 입지 여건, 비용 및 기술력을 종합적으로 검토하였으며, 부산 등 동남권 지역의 주요 거점용 물론 전남 지역 내의 후보지에 대한 비교 분석을 수행하였다.

• Laser Solutions
• /
• v.3 no.1
• /
• pp.38-45
• /
• 2000

A 4㎾ RS840 CO2 laser with a powder auto-feeding apparatus has been used to deposit multiple overlapping tracks of Ni-base superalloy on to low carbon steel. It was found that the surface roughness(turbulence) of an overlapped cladding layer decreased with the increase of the overlapping ratio in an oscillating manner. When the overlapping ratio had values of 0.62, the surface turbulence was lowest. Overlapping ratio offer significant potential for improvement of materials surface properties such as corrosion performance and wear resistance. This paper reports that the overlapping ratio shows best corrosion resistance. The tensile residual stresses generated at the higher overlapping ratio( ＞ 0.45) and the element concentration of Fe increased in the surface layer at the lower overlapping ratio( ＜ 0.45) may lead to worse corrosion resistance.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.289-296
• /
• 2001

Ni-P electroformed layers were investigated for developing a steam generator tube repair technology in PWRs. The effects of an additive, RPP (Reagent over Pitting Protection) and agitation on mechanical properties and microstructure of the layer were evaluated. The addition of the RPP showed to inhibit the formation of pores, to refine the grain size, and to increase the residual stress in the layer. However, the agitation of the solution during electroforming was observed to increase pores in local regions of the electroformed layer, resulting in decreasing its mechanical properties. The heat treatment of the layer at $343^{\circ}C$ for 1 hr. precipitated the very fine particles of Ni3P in the layer, which inhibited grain growth and increased microhardness.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.59-64
• /
• 1999

Based on the study of hydrolysis behaviour of U(Ⅵ) ion and major fission product metal ions such as Cs(Ⅰ), Ce(Ⅲ), Nd(Ⅲ), Mo(Ⅵ), Ru(Ⅱ), and ZR(Ⅳ) in the titration media, the performance of noncomplexing-alkalimetric titration method for the determination of free acid in the presence of these metal ions was investigated and its results were compared to those from the completing methods. The free acidities could be determined as low as 0.05 meq in uranium solutions in which the molar ratio of U(Ⅵ)/H+ was less than 5, when the end-point of titration was estimated by Gran plot. The biases in the determinations were less than 1% and about +3% respectively for 0.4 meq and 0.05 meq of free acid at the U(Vl)/H+ molar ratio of up to 5. Applicability of this method to the determination of free acid in spent fuel solutions was confirmed by the analysis of nitric acid content in simulated spent fuel solutions and in a real spent fuel solution.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1149-1152
• /
• 1997

An enzyme electrode for the amperometric measurement of urea was prepared by co-immobilizing L-glutamate dehydrogenase and urease onto an Immobilon-AV affinity membrane attached to a glassy carbon electrode. The reduced nicotinamide adenine dinucleotide(NADH) was used as the electroactive species. The electrochemical oxidation of NADH was monitored at +1.0 volt vs. Ag/AgCl. The enzyme-immobilized electrode was linear over the range of 2.0 × 10-5 to 2 × 10-4 M. The response time of the electrode was approximately 3 min. and the optimum pH of the enzyme immobilized membrane was pH 7.4-7.6 (Dulbcco's buffer solution). It was stable for at least two weeks or 50 assays. There was no interference from other physiological species, except from high levels of ascorbic acid.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.5
• /
• pp.598-604
• /
• 1999

The thermal performance of cooling towers is affected by the temperature of inlet water, wet bulb temperature of entering air add water-air flow rate. In this study, the effects of these variables are simulated using NTU-method and experimentally investigated for the counter-flow cooling towers. The simulation program to evaluate these variables which affect the performance of cooling tower was developed. The maximum errors between the results of simulations and experiments were 3.8% under the standard design conditions and 5.4% under the other conditions. The performance was increased up to 46~50% as the water loading was increased from $6.8m^3$/$hr\cdot m^2$ to $15.9m^3$/$hr\cdot m^2$. The range was reduced up to 56~42% when the wet bulb temperature of the entering air was increased from $22^{\circ}C\; to\; 29^{\circ}C.$

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.181-208
• /
• 2019

This paper presents a new classification and code system on the Archives of the Government-general Museum of Joseon in the National Museum of Korea. Three points were noted that since the Museum belonged to the Government-general of Joseon, the classification system of the Archives should be established to comply with the Archives system of the Government-general of Joseon; based on the concept of the functional provenance, it is necessary to establish a classification system in accordance with the organization structure of the Government-general Museum of Joseon; a systematic and simple classification codes should be given based on the classification system to improve the convenience of searching and using the official document. The classification system and its code are proposed in the order of major function, medium function, small function, and detailed function. The major function of the Archives is 'A-Educational affairs', medium function 'Museum.' The small function may be divided into General affairs (01), Temple (02), Scenic Spot and Natural Monument (03), Historical Site (04), and Museum (05). The detailed function and detailed sub-functions are categorized by the various work assignments in each work units. I hope that this new classification system will make a contribution to organizing and utilizing the Archives of the Government-general Museum of Joseon in the National Museum of Korea.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.616-618
• /
• 2002

A Superconducting Rotary Machine (SRM) is characterized by an air-cored machine with its rotor iron and stator iron teeth removed. For this reason, the SRM is featured by 3D magnetic flux distribution, which decreases in the direction of axis, Therefore, 3D magnetic field analysis method is required to know about characteristic of magnetic field distribution of SRM, In this paper, 3D flux distribution of SRM is calculation by using analytical method. The magnetic field distribution due to the field coils use of the Biot-Savart equation. The magnetic core is represented by magnetic surface polarities. The paper describes the combined use of above methods for the total computation, and compares analytical method and 3D FEM(Finite Element Method) results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.178-184
• /
• 2014

In this study, we develop liquid density sensor by measuring of balanced position between gravity and bouyancy, corresponding to liquid density, using distance measuring by magnetostriction technology. For improvement of accuracy of liquid density sensor system. And we derive the related equation between liquid density and moving distance of density sensor, and make the calibration method for liquid density sensor by magnetostriction technology. Using fabricated liquid density sensing system and derived equation, have measured the density of several liquids. And compare it to measuring results using Oscillating U-tube type high accuracy density meter, having 0.000001 g/cc resolution. The deviation of results between two density measuring systems was less than 0.001 g/cc.

• Journal of Environmental Science International
• /
• v.19 no.12
• /
• pp.1355-1359
• /
• 2010

The application of metal caps has been continuously increased as real life are extended. Metal caps is usually made of aluminum and polyethylene(PE) as packing. Since metal caps contain 75% aluminum on a weight basis, metal caps may be a valuable source when these were properly recovered. The recovery methods of metal caps have mechanical peeling and incineration. However these are either hard to apply in some case or environmentally unacceptable. So in this investigation, recovery method of aluminum from metal caps was investigated using pyrolysis. The result shows that pyrolysis temperature and pyrolysis time was $450^{\circ}C$ and 120min. respectively. Also 100% of aluminum was recovered from metal caps. Heat content of recovered oil was high enough to use as a fuel representing 7,425.0, 7,793.1, 7,583.2, 7,726.2(cal/g). Heavy metal contens in the oil were under regulatory limit indicating.