• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.208-214
• /
• 2017

This study aimed to determinate the effect of fluorescent light and light-emitting diodes on the leaf morphology, growth and antioxidant capacity of Salvia plebeia. The plants were grown for 56 days after transplanting (DAT) under the fluorescent light (FL) and LEDs (White, Red and Blue (R+B, ratio 2:1), Blue, Red LED) under the same light intensity and photoperiod ($130{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 12 hours). Leaf length, width and number of Salvia plebeia at the 56 DAT were significantly higher under the FL and red LED, and lower in the RB LED and white LED. The highest fresh and dry weights of shoot and leaf area were observed in the red LED, followed by the FL and blue LED, and the lowest in the RB LED and white LED. After 21 DAT, leaf apinasty symptom was appeared in plants grown under red LED and RB LED. The chlorophyll content was lower in the red LED. The specific leaf weight, the ratio of leaf dry weight to area, was higher in the blue LED, and lowest in the FL. No significant difference in DPPH radical scavenging activity of Salvia plebeia under the different light sources. All the integrated results suggest that the FL light is a proper light conditions for a closed cultivation of Salvia plebeia.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.171-177
• /
• 2006

The purpose of this study was to evaluate the light microscopic features and the maximum insertional and removal torque value of microimplants, made from titanium grade 2 or 4, in the tibia of 6 rabbits. First, the maximum torque values of microimplants at implantation were measured. After 2, 8, and 12 weeks of healing time, the microimplant-containing segments of tibia of 2 rabbits were removed and the maximum removal torque of each microimplant were measured. Comparisons of histologic examination and insertional and removal torque values were carried out for the two groups of microimplants. Removal torque values were significantly increased in both groups after 8 and 12 weeks as compared to 2 weeks after implantation. Other values measured did not show any statistically significant differences and there were no histological differences between grade 2 and 4 titanium. Based on these results, this study showed that there were no significant differences between grade 2 and 4 titanium. It seems better to use grade 4 titanium for making microimplants because grade 4 titanium is mechanically harder than grade 2 titanium and has similar retention.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.415-420
• /
• 2011

Purpose: Calcium phosphate cement (CPC) is one of many useful materials for restoring tooth defects, periodontium and maxillofacial area. Chitosan is a biodegradable material that has been shown to promote the growth and differentiation of osteoblasts in culture. This study examined the interaction between odontoblasts and bio-calcium phosphate cement reinforced with chitosan. Materials and Methods: $5{\times}10^3$ odontoblastic cells were seeded into each well. Various concentrations of bio-calcium phosphate cement reinforced with chitosan (10, 20, 50, 100, 200, 500 ${\mu}g$/ml, 1, 2, 4 mg/ml) were diluted and added to the wells. The well was incubated for 24 h, 48 h and 72 h. After incubation, the number of cells was assessed to determine the cell viability. A cytokinesis-block micronucleus assay and chromosomal aberration test were carried out to estimate the extent of chromosomal abnormalities. Microscopic photographs and RT-PCR were performed to examine the adhesion potential of bio-calcium phosphate cement reinforced with chitosan. Results: Bio-CPC-reinforced chitosan did not show significant cytotoxicity. The number of damaged chromosomes in the cells treated with Bio-CPC-reinforced chitosan was similar to that in the control cells. There was no significant increase in the number of chromosomal aberrations in the Bio-CPC reinforced chitosan exposed cells. Microscopic photographs and RT-PCR confirmed the adhesive potential of bio-CPC reinforced chitosan to odontoblasts. Conclusion: Bio-CPC-reinforced chitosan did not affect the odontoblastic cell viability, and had no significant cytotoxic effect. Bio-CPC-reinforced chitosan showed adhesive potential to odontoblasts. These results are expected form the basis of future studies on the effectiveness of dental restorative materials in Bio-CPC reinforced with chitosan.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.222-228
• /
• 2010

The purpose of this study was to compare mineral trioxide aggregate (MTA; Dentsply, Tulsa Dental, Tulsa, OK, USA), which is widely used as root-end filling material, with DiaRoot BioAggregate (DB; Innovative BioCaramix Inc, Vancouver, BC, Canada), newly developed product, by using MG63 osteoblast-like cells. MTA, DB, and Intermediate Restorative Material (IRM; Dentsply Caulk, Milford, DE, USA) were used for root-end filling material while tissue culture plastic was used for control group. Each material was mixed and, the mixtures were left to set for 24 hours. MG63 cells were seeded to each group and then they were cultured for attachment for 4 hours. Following the attachment of cells to the root-end filling material, early cellular response was observed. After another 12 hours'culture, the level of attachment between cells and material was observed and in order to identify the effect of each material to bone formation, transforming growth factor beta1 ($TGF{\beta}1$) and osteocalin (OC) were estimated by using enzyme-linked immunosorbent assay (ELISA), and the amount of alkaline phosphatase (ALP) was also measured. The data were analyzed using one-way ANOVA. As a result, only at OC and the number of cells which were attached to materials, there was no statistical difference between MTA and DB. At other items, there was statistically significant difference in all groups. Although DB has not shown exactly the same cellular response like that of MTA, the number of attached cells shows that biocompatibility of the material and OC indicates bone formation rate. Therefore, if DB is used for root end filling material, it is expected to lead to similar results to MTA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2016

This study was a preparatory experiment aimed the development of membrane scaffolds for tissue engineering. A PCL composite solution contained sodium chloride(NaCl). PCL porous membrane scaffolds were formed on a glass casting plate using a film applicator and immersed in distilled water to remove the NaCl reaching after drying. NaCl was used as a pore former for a 3 dimensional pore net-work. The dry condition parameters were $4^{\circ}C$, room temperature (RT) and $40^{\circ}C$ for each different temperatures in the drying experiment. SEM revealed the morphology of the pores in the membrane after drying and evaluated the in vitro cytotoxicity for basic bio-compatibility. The macro and micro pores existed together in the scaffold and showed a 3-dimensional pore net-working morphology at RT. The in vitro cytotoxicity test result was "grade 2" in accordance with the criterion for cytotoxicity by ISO 10993-5. The dry condition affected the formation of a 3 dimensional pore network and micro and macro pores. Therefore, these results are expected provide the basic process for the development of porous membrane scaffolds to control degradation and allow drug delivery.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.375-384
• /
• 2014

Kenaf (Hibiscus cannabinus L.) was recognized as a potential source of forage. But the domestic cultivation techniques are not set standards yet. So we tested the basic culture techniques during 2012~2013 for getting a high yield and good grade forage production system. The best seeding method for mechanized planting (corn planter used) was hill seeding with $20{\times}20cm$ seeding distance. When we treated hill seeding with $20{\times}20cm$, the yield what we could get was 13,641 kg/10a and it was 32% more than that of conventional practice hill seeding with $20{\times}30cm$ seeding distance. The proper seeding date for getting high yield was May 1. In May 1, the yield per 10a was reached 13,423 kg, and it was 30% more than that of seeding at May 30. More over the crude protein content which was important factor for determinating forage nutritive value was 12.7% and it was higher 1.8% (relatively 16.5% high) than that of May 30 seeding. The most effective herbicide for kenaf was Fluazipof-p-butyl. It's herbicidal rate was 97% and phyto-toxicity was less than 5%. Regional adaptability for Jeollabuk-Do including Imsil Gun, Kochang Gun and Sunchang Gun were identified that the stable cultivation were possible in these area with average yield 12,400 kg/10a and it was about 1.7 times as compared to corn harvest.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.77-81
• /
• 2003

Purpose: The biomechanics and kinematics of knee joint were reviewed in this article. And then the common sports injuries were presented. Anatomy and Kinetics: None of the pairs of bearing surfaces in the knee joint is exactly congruent This allows the knee six degrees of freedom of motion. Tibiofemoral Kinematics: In flexion and extension, the axis of motion is not perpendicular to the medial-lateral plane of the joint, nor is it perpendicular to the axis of longitudinal rotation. This results in coupled varus angulation and internal rotation with flexion and in valgus angulation and external rotation with extension. Patellofemoral Articulation: Loads across the patellofemoral joint are indirectly related to the angle of knee flexion and directly related to the force generated within the quadriceps mechanism. Fractures of the Patella: Nonoperative treatment is indicated if the extensor mechanism is intact and if displacement of fragment is minimal. The specific type of internal fixation depends on the fracture pattern. It is important to repair retinaculum. Acute and Recurrent Patellar Instability: The degree of dysplasia and the extent of the instability play a large part in determining the success of nonoperative treatment. Patients who experience recurrent dislocations and patients with major anatomic variations require surgery to minimize their instability. Sports Injuries in School-age Atheletes: Patellar pain in young athletes groups a number of conditions, including Idiopathic Adolescent Anterior Knee Pain, Osgood- Schlatter Disease, and Sinding-Larsen-Johansson Disease.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.4
• /
• pp.263-268
• /
• 2007

This experiment was carried out to evaluate the effects of organic content and to select lodging resistance for six varieties in paddy field of Chungnam province from 2006 to 2007. In this experiment, plant height was increased at the high fertile field and dry matter rate (%) per fresh matter was decreased at the high fertile soil condition but dry matter rate (%) of spike was increased. The dry matter (DM) yield showed higher in Sunwoo barley (13,520kg/ha) and Youngyang barley (12,780kg/ha) at the high fertile field. Fresh yield was also high in Wooho barely (34,720kg/ha) and Youngyang barely (33,670kg/ha) at the high fertile field but yield in high and normal fertile soil condition was not difference. Total digestible nutrients (TDN) content of Youngyang barley and Yuyeon barley was high as 69.5%, 70.3%, respectively, at the high fertile soil condition. According to this result Soman barley and Youngyang barley might be recommendable for whole crop barely in lower organic content condition of paddy rice field and Wooho barley and Soman barley with the lodging resistance and high yield is suitable for paddy field with high organic content.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.135-142
• /
• 2011

Purpose: Deficiencies of the abdominal wall can be the a result of infection, surgery, trauma, or primary herniation. For abdominal wall reconstruction, synthetic materials have been shown to provide a better long-term success rate than primary fascial repair. But, synthetic materials cannot elicit angiogenesis or produce growth factor and are therefore plagued by an inability to clear infection. As a result of the inherent drawbacks of synthetic, significant effort has been spent on the identification of new bioprosthetic materials. The aim of our study is to evaluate the effectiveness of a synthetic material (PROCEED$^{(R)}$) and an ADM ($SureDerm^{TM}$) to repair abdominal wall defects in a rabbit models. Methods: We measured the tensile strength of the $SureDerm^{TM}$ and PROCEED$^{(R)}$ by a Tension meter (Instron 4482). 16 Rabbit models were assigned to this study for abdominal wall reconstruction. Abdominal defect of 8 rabbits were reconstructed by PROCEED$^{(R)}$ and the rest were reconstructed by $SureDerm^{TM}$. We assessed gross and histologic examinations for the reconstructed abdominal wall. Results: The tensile strength of $SureDerm^{TM}$ and Gore Tex$^{(R)}$ is $14.64{\pm}0.51Mpa$, $8.54{\pm}0.45Mpa$. PROCEED$^{(R)}$ was estimated above the limits of measurement. Inflammatory reaction of PROCEED$^{(R)}$ persisted for 32weeks, but $SureDerm^{TM}$ decreased after 16weeks. Vascular ingrowth into the $SureDerm^{TM}$ was seen after 32 weeks. The basement membrane of $SureDerm^{TM}$ changed into a form of pseudoperitoneum. In PROCEED$^{(R)}$, it seemed like pseudoepithelial lining was made from the fibrosis around the mesh. Conclusion: In our study, the $SureDerm^{TM}$ not only have less inflammatory reaction and presented more angiogenesis than the PROCEED$^{(R)}$, but also have pseudoperitoneum formation. It is expected that $SureDerm^{TM}$ is useful for abdominal wall reconstruction. However, a long-term study of its usage consequences are thought to be needed.

• Korean Journal of Environmental Biology
• /
• v.32 no.3
• /
• pp.234-242
• /
• 2014

In this study, gametotoxicity and embryotoxicity experiments using Hemicentrotus pulcherrimus were carried out to investigate the ecotoxicological effects of bisphenol A (BPA). We examined the effects of BPA on fertilization and normal embryogenesis at various concentrations (0, 300, 500, 800, 1000, and 1500 ppb). The results demonstrated that the fertilization rates were not changed. The normal embryogenesis rates were gradually decreased in a dose-dependent manner, and were significantly lowered following 800 ppb BPA treatment ($EC_{50}$=1056.1 ppb, 95% Cl=981.8~1163.9 ppb). The observed effective concentration and the lowest observed effective concentration of the normal embryogenesis rate were 500 ppb and 800 ppb, respectively. The embryos showed retarded development at each tested concentration, indicating the fact the embryonic development was delayed due to the increasing concentrations of BPA. Furthermore, we examined the expression of glutathione S-transferase (GST) mRNA at various concentrations of BPA in H. pulcherrimus. Interestingly, it was found that the expression level of GST mRNA was significantly increased in the experimental group exposed to BPA. Based on these results, we suggested that BPA at greater than 800 ppb has a toxic effect during the early embryonic stages of H. pulcherrimus, and GST mRNA may be used as a biomarker for risk assessment of BPA contamination.