• Korean Journal of Breeding Science
• /
• v.43 no.4
• /
• pp.233-240
• /
• 2011

Food security has been a main global issue due to climate changes and growing world population expected to 9 billion by 2050. While biodiversity is becoming more highlight, breeders are confronting shortage of various genetic materials needed for new variety to tackle food shortage challenge. Though biotechnology is still under debate on potential risk to human and environment, it is considered as one of alternative tools to address food supply issue for its potential to create a number of variations in genetic resource. The new technology, phenomics, is developing to improve efficiency of crop improvement. Phenomics is concerned with the measurement of phenomes which are the physical, morphological, physiological and/or biochemical traits of organisms as they change in response to genetic mutation and environmental influences. It can be served to provide better understanding of phenotypes at whole plant. For last decades, high-throughput screening (HTS) systems have been developed to measure phenomes, rapidly and quantitatively. Imaging technology such as thermal and chlorophyll fluorescence imaging systems is an area of HTS which has been used in agriculture. In this article, we review the current statues of high-throughput screening system in phenomics and its application for crop improvement.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.33-44
• /
• 2019

This study was initiated to find possibility of substitute of gibberellin acid and to prevent negative girdling effect such as slow growth of 'Niitaka' (Pyrus pyrifolia Nakai) trees, a major pear cultivar, at harvest and at 60-, 90-, and 120-d after storage. Seasonal wiring with 3.0-mm-diameter were applied on the main branch at 70, 80, 90, 110, and 130 days after full bloom (DAF) to compare the fruit quality and storability. Fruit weight and sugar contents were the greatly increased by the wiring treatment at 110 DAF, with the lowest values observed for the wiring at 70 DAF. All the wiring treatments reduced fruit acidity but did not affect fruit firmness. a-value on fruit skin was the highest for wiring at 110 DAF and 130 DAF, advancing fruit ripening. The lowest fruit weight loss was occurred at wiring at 110 DAF. a-value on fruit skin was the highest for wiring at 90 DAF and 110 DAF. Wiring at 80 DAF the most increased floral bud diameter, resulting in the lowest L:D ratio of 1.74 observed. As for the mineral nutrients concentrations of floral buds, the concentration of K (0.63%) and Mg (0.31%) were the highest after 80 DAF wiring treatment, whereas Ca and P concentrations did not differ among treatment plots. The leaf K concentrations was the highest in the 130-day wiring treatment (0.76%) and in the control plot (0.78%), whereas there was no significant difference in the concentrations of either Ca or P among treatment plots. Short periods of wiring increased foliar Mg concentrations. In floral buds, carbohydrates showed a tendency for accumulating at a lower concentrations (7.75%) after 70 DAF wiring treatment, which was a relatively short treatment period. On the other hand, the carbohydrate concentrations in leaves showed a tendency for accumulating at lower concentrations after 130 DAF wiring treatment (2.51%), which is a long treatment period, and in the control plot (2.43%). Wiring increased the size and sugar content of fruits, and influenced fruit storability. For the wiring treatment period was delayed, the carbohydrate concentration in flower buds showed curvilinear correlation and the negative correlation with the carbohydrate in leaf tissue.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.53-62
• /
• 2019

The purpose of this study was to establish the in vitro propagation system by shoot tip culture of six Hosta species native to Korea (Hosta capitata (Koidz.) Nakai, H. clausa Nakai, H. jonesii M.G.Chung, H. minor (Baker) Nakai, H. venusta F.Maek., and H. yingeri S.B.Jones) for mass proliferation and a new cultivar development. The shoot tips of each Hosta species were cultured on MS medium containing eight combinations of 0.5, 1.0, 2.0, 4.0 mg/L BA with 0.1 mg/L NAA, 0.1, 0.5, 1.0, 2.0 mg/L TDZ with 0.1 mg/L NAA, and without any PGRs (control). They were investigated on callus, somatic embryo, crown bud, differentiation and growth of shoot and root, total fresh weight after 8 weeks of culture. In all six Hosta species, callus and somatic embryo induction rate and multiple shooting rate of the PGRs treatment group were higher than that of the control group. The highest number of differentiated shoots were obtained on medium supplemented with 2.0 ㎎/L TDZ in H. capitata (5.4), 1.0 mg/L TDZ in H. clausa and H. jonesii (3.3 and 5.8, respectively), 0.5 mg/L BA in H. minor (11.1), 1.0 mg/L BA and 0.1 mg/L TDZ in H. venusta (8.1), and 0.5 mg/L TDZ in H. yingeri (9.8). In somatic embryo formation, the PGRs treatment group of H. jonesii and H. yingeri were more effective than the control group, and the effects were relatively less in H. capitata, H. clausa Nakai, H. minor, H. venusta. Crown bud formation of four Hosta species (H.capitata, H. clausa, H. jonesiig, and H. yingeri) were also higher in the PGRs treatment group than in the control group. Crown bud formation of four Hosta species (H.capitata, H. clausa, H. jonesiig, and H. yingeri) were also higher in the PGRs treatment group than in the control group. H. clausa showed no significant effect on callus and shoot differentiation regardless of the type and concentration of cytokinin, but slightly increased in formation of crown bud in TDZ.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2019

The aim of this study was to compare the degree of conversion and polymerization shrinkage of low and high viscosity bulk-fill giomer-based and resin-based composites. Two bulk-fill giomer (Beautifil Bulk Restorative (BBR), Beautifil Bulk Flowable (BBF)), two bulk-fill (Tetric N-Ceram Bulk-fill (TBF), SureFil SDR flow (SDR)) and two conventional resin composites (Tetric N-Ceram (TN), Tetric N-flow (TF)) were selected for this study. The degree of conversion was measured by using Fourier transform infrared spectroscopy. Polymerization shrinkage was measured with the linometer. For all depth, BBR had the lowest degree of conversion and SDR had the highest. At 4 mm, the degree of conversion of low and high viscosity bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). At the depth between 2 mm and 4 mm, there were significant difference with TBF, TN and TF (p < 0.05), while no significant difference in the degree of conversion was measured for BBR, BBF and SDR. Polymerization shrinkage of six resin composites decreased in the following order: TF > SDR > BBF > TBF > TN and BBR (p < 0.05). Polymerization shrinkage of bulk-fill giomer resin composites was lower than that of bulk-fill resin composites (p < 0.05). From this study, it is found that the bulk-fill giomer resin composites and TBF were not sufficiently cured in 4 mm depth. The degree of conversion of low and high viscosity bulk-fill giomer resin composites was significantly lower than bulk-fill resin composites in both 2 mm and 4 mm depths. Therefore, such features of bulk-fill giomer resin composites should be carefully considered in clinical application.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.178-184
• /
• 2011

In this study, the antibacterial, antioxidative and inhibitory effects of Allium cepa peel extracts on tyrosinase and elastase were investigated. MIC values of the ethyl acetate fraction of Allium cepa peel on especially, S. aureus among the skin resident flora (Staphylococcus aureus, S. aureus; Propionibacterium acnes, P. acnes; Pityrosporum ovale, P. ovale; Escherichia coli, E. coli) were 0.06%. The aglycone fraction showed more excellent free radical (1,1-diphenyl-2-picrylhydrazyl radical, DPPH) scavenging activity ($FSC_{50}=5.05{\mu}g/mL$). Reactive oxygen species (ROS) scavenging activities ($OSC_{50}$) of the ethyl acetate fraction and aglycone fraction in the luminol-dependent $Fe^{3+}-EDTA/H_2O_2$ system were 0.05 and $0.03{\mu}g/mL$, respectively. The cellular protective effect of the aglycone fraction on the rose-bengal sensitized photohemolysis of human erythrocytes exhibited more prominent (${\tau}_{50}$, 480 min at $25{\mu}g/mL$). The inhibitory effects ($IC_{50}$) of the ethyl acetate fraction and aglycone fraction on tyrosinase were 9.16 and $8.68{\mu}g/mL$, the inhibitory effect ($IC_{50}$) of the aglycone fraction on elastase was $14.12{\mu}g/mL$ The transepidermal water loss of the cream containing 0.1% ethyl acetate fraction was decreased from $8.3g/m^2h$ in control to $6.8g/m^2h$ in the subjects applied with cream containing the ethyl acetate fraction. These results indicate that extract/fractions of Allium cepa peel can function as antioxidant in biological systems, particularly skin exposed to UV radiation by scavenging $^1O_2$ and other ROS, and protect cellular membranes against ROS, and possibly as antiaging agents. Allium cepa peel extract could be used as a new cosmeceutical for whitening and anti-wrinkle products.

• Journal of Food Hygiene and Safety
• /
• v.35 no.6
• /
• pp.618-629
• /
• 2020

The purpose of this study was to optimize the fermentation condition of black bean by lactic acid bacteria (LAB) and to evaluate the quality characteristics of fermented black bean. Lactobacillus plantarum SU22 isolated from kimchi was selected as a starter for the fermentation of black bean because the strain exhibited strong antimicrobial activity against pathogenic bacteria and did not produce biogenic amines or a carcinogenic enzyme, β-glucuronidase. Fermentation was performed with broth containing puffed black bean (PBB) inoculated with 1% (v/v) of L. plantarum SU22 at 37℃ for 48h. The viable cell count of LAB was over 9 Log CFU/mL in PBB (20%) broth fermented with L. plantarum SU22. Fermentation of alcalase-treated PBB (20%) broth with L. plantarum SU22 was found to be the optimal condition, increasing viable cell count of LAB up to 10.30 Log CFU/mL. Under the optimal condition, the total polyphenol content (94.02 mg GAE/g) and DPPH radical scavenging activity (92.50%) were significantly increased, compared to non-fermented control (87.74 mg GAE/g, 83.14%).

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.135-142
• /
• 2022

Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.467-475
• /
• 2021

The purpose of this study was to compare the effect of sodium fluoride(NaF) varnish and potassium iodide(KI) on remineralization efficacy of silver diamine fluoride(SDF) by measuring microhardness and evaluating surface morphology by scanning electron microscope(SEM). Artificial caries lesions were induced on extracted primary molars and vickers microhardness was measured. Specimens were randomly separated into 4 groups for treatment. The specimens in group I were treated with SDF, group II with NaF varnish after SDF, group III with KI after SDF and group IV with distilled water. After 8 days of pH cycling, vickers microhardness was measured and difference before and after treatment was calculated. For SEM, 2 samples were evaluated respectively after enamel polishing, lesion formation and after pH cycling. Group III showed highest increase in microhardness. Group I showed higher increase in microhardness than Group II but without statistical difference. Group IV showed lowest increase in microhardness value among 4 groups. On SEM image, group I, II and III showed smoother and less irregular surface compared to group IV. Amorphous crystal pellicles were observed in group III. In conclusion, SDF, SDF and NaF, SDF and KI groups showed smoother surface and increase in microhardness suggesting the possibility that remineralization effect might take place in oral conditions. In addition, in limited conditions of this study, applying NaF varnish after SDF did not increase the remineralization efficacy of SDF while KI significantly increased the remineralization efficacy of SDF. However, additional study considering various conditions that might affect demineralization and remineralization in clinical situations need to be conducted.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.69-79
• /
• 2020

In this study, the anti-inflammatory and cytotoxic effects of hot-water extracts from 10 kinds of macroalgae in Korea were investigated. It was selected materials in consideration of biological activity and industrial potential as follows: Caulerpa okamurae; Codium fragile; Ulva australis; Ishige foliacea; Saccharina japonica; Sargassum horneri; Undaria pinnatifida; Gloiopeltis tenax; Gracilaria verrucosa; Porphyra tenera. Results showed that S. japonica and G. tenax significantly decreased NO productionn in LPS-stimulated Raw 264.7 cells at concentrations of 100, 1000 ㎍/mL and 1000 ㎍/mL, respectively. However, most of the other macroalgae used in the experiment did not affect NO production. It was observed that all macroalgae extracts except for the highest concentration (1000 ㎍/mL) treatment group of P. tenera did not affect the viability in Raw 264.7 cells. In addition, there was not significant decrease in cell viability by macroalgae extracts treatment in HINAE cells. These results suggest that S. japonica and G. tenax could be used as potential safe natural anti-inflammatory agents for food and feed additives. Also, the results of this study are expected to be used as basic data for the development of functional materials for 10 kinds of macroalgae resources in Korea.

• Analytical Science and Technology
• /
• v.34 no.6
• /
• pp.259-266
• /
• 2021

Cannabis (Marijuana) is one of the most widely used drugs in the world, and its distribution has been controlled in South Korea since 1976. Identification of 11-nor-Δ⁹-carboxy-tetrahydrocannabinol (THCCOOH) in urine can provide important proof of cannabis use, and it is considered scientific evidence in the forensic field. In this study, we describe a simultaneous quantitative method for identifying THCCOOH and THCCOOH-glucuronide in urine, using simple liquid-liquid extraction (LLE), and liquid chromatography-tandem mass spectrometry (LC-MS/MS). THCCOOH-D₃ and THCCOOH-glucuronide-D₃ were used as internal standards. Validation results of the matrix effect, as well as recovery, linearity, precision, accuracy, process efficiency, and stability were all satisfactory. No carryover, endogenous or exogenous interferences were observed. The limit of detection (LOD) of THCCOOH and THCCOOH-glucuronide were 0.3 and 0.2 ng/mL, respectively. The developed method was applied to 28 authentic human urine samples that tested positive in immunoassay screening and gas chromatography/mass spectrometry (GC/MS) tests. The ranges of concentrations of THCCOOH and THCCOOH-glucuronide in the samples were less than LOQ~266.90 ng/mL and 6.43~2133.03 ng/mL, respectively. The concentrations of THCCOOH-glucuronide were higher than those of THCCOOH in all samples. This method can be effectively and successfully applied for the confirmation of cannabinoid use in human urine samples in the forensic field.