• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.4
• /
• pp.232-239
• /
• 2023

This study was to evaluate the values of Korean native sweet sorghum as a new feed crop for ruminants. Sweet sorghum was the Muan native species (Bioenergy Crop Research Center, National Institute of Crop Science), and cultivated from May to October 2021 at Sangji University (Wonju-si, Gangwon-do, Korea). There were a non-treated group (Con), a recommended amount treatment (RD) and a treatment with double the recommended amount (Double RD) by an oil cake fertilizer. Plant height was measured at weekly intervals for 12 weeks after planting sweet sorghum seedlings, and was a significant difference in the order of Double RD, followed by RD and Con in 7 weeks (p<0.05). Feed values and sugar contents were measured in 7, 9, and 11 weeks. Crude protein of Double RD was higher than that of the other treatments in 7 and 9 weeks (p<0.05). Crude fat was higher at Double RD than the other one in 9 weeks (p<0.05). ADF and NDF of Double RD were higher than the other one (p<0.05). When it was compared to corn and sudangrass hybrids grown on farms, Crude protein was lower in sweet sorghum than other crops (p<0.05), and crude fat was higher in sweet sorghum than corn (p<0.05). Crude fiber, ADF and NDF were higher in sweet sorghum compared to corn and sudangrass (p<0.05). The sugar contents of sweet sorghum were 4.07 ± 0.12~7.63 ± 0.21 brix, and showed higher than corn and sudangrass hybrid (p<0.05). The rumen in situ digestibility of sweet sorghum was 30.73~38.13% at the 9th and 11th weeks, and showed higher than that of corn and sudangrass hybrids (p<0.05). Therefore, it is considered that Korean native sweet sorghum has sufficient value as a new forage crop for ruminants, and good value as yield, nutrients and digestibility, when the grass height is 273.33~332.50 cm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.59-66
• /
• 2020

Recently, cultivation and management technologies have been needed to adapt due to climate change, which is causing abnormal weather conditions. One technique is to increase the utilization of evergreen broad-leaved species with high ornamental value. A total of five treatments were installed (1m×22.5m), including 60g/㎡ and 80g/㎡ using two types mulching material with an overlapping and hole-drilling mulching method and these were compared to un-mulching treatment a total of planted 92㎡ attheWol-aTestSiteForestattheForestforBiomaterialsResearchCenterinJinju-si, Gyeongsangnam-dofor 10monthsusing3-years-oldQuercusglaucaThunb. In comparison with the control site, the 60g/㎡ overlapping method was about 1.9 times higher than the root collar diameter, but there was no statistical significance between the treatments. Healthy seedlings were found to meet these conditions due to high biomass values and below and T/R ratios of 3.0 or lower and H/D ratios of 7.0 or lower. Comparing the values of LWR, SWR, and RWR, which can be evaluated for seedling due to the mulching treatments, as compared to the control, the growth of the ground areas including leaves and stems was enhanced, but the growth of the underground areas containing roots tended to have high control values. Based on this, the SQI value, which can be evaluated for the comprehensive quality of seedlings, was found to be significantly different between the control site and the mulching treatment sites, confirming that the growth and growth improvement effects were achieved with mulching treatments. The chlorophyll content analysis showed that there was a significant difference from the control site, and it was judged that weed generation in the control acted as an environmental stress, causing a decrease in chlorophyll content. It was found that the overlapping 80g/㎡ of polypropylene mulching material generated about 4 times fewer weeds than the control, and the manpower required for the mulching test field and weeding were equal at 3.3 people/100㎡/1 day. Mulching treatments have demonstrated a significant difference in the promotion of growth and quality of the seedlings and are judged as an alternative that can reduce the economic burden incurred by the purchase of the supplies and the manpower required to weed forestry plantations.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.1
• /
• pp.65-70
• /
• 2003

This study was conducted to select the promising varieties of alfalfa (va.) Venal, Ancho., P5444, DK120, DK125, Horizon, DK135, Luna and Kitawacaba at Daekwanryong branch(altitude 800m a.s.l.) and Namwon branch(altitude 450m a.5.1.) of National Livestock Research Institute Leaf width of alfalfa was broad in all varieties except fer Vernal, and DK125 was flowered the earliest of all varieties. Plant height of Luna was the longest, and winter hardness of P5444 was the greatest with 80.2% of all varieties. In Daekwanryong, dry matter(DM) yield of Luna was the highest and DM yield of vernal was the lowest among the varieties in Namwon. In both areas, dry matter yield ef P5444 was the highest of alfalfa varieties. In Daekwanryong, ADF and NDF concentrations of DK 120 were the lowest of all alfalfa varieties. In Namwon, ADF concentrations of Horizon was the lowest with 26％, and NDF concentrations of DK 125 and Horizon was the lowest with 40.8%. Crude protein concentrations of P5444, Luna and DK 120 were higher than that of different varieties in Daekwanryong and crude protein content of Horizon was the highest with 28.1% in Namwon. Average crude protein yield of both areas was the highest of P5444. The results of this study indicated that Luna, Horizon and P5444 would be the promising alfalfa varieties in Daekwanryong, Namwon and both areas, respectively.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.4
• /
• pp.257-267
• /
• 1993

Optimum pasture management during the summer season is an important factor to maintain good regrowth and persistence of pasture. The field experiment was carried out to investigate the effects of cutting management on growth and reserve carbohydrates in stubble. and on dry matter yield of orchardgrass dominated pasture during the mid-summer season. Three different cutting times(July 15, 25 and August 5) as a main plot and three cutting heights(3, 6 and 10cm) as a sub plot were disigned with three replications. The experiment was done at pasture of Changsung Agricultural High School in 1988. The results obtained were summarized as follows: 1. Temperature of soil surface and underground in the cutting of July 15 and July 25 was not showed significantly different, because of low intensity of radiation with a run of wet weather, and that of August 5 cutting tends to be lowed in high cutting height during the mid-summer season. 2. Amount of soil moisture against cutting height showed that high cutting had a low content. 3. Growth rate against regrowth of plant height, lear length and leaf area showed to be fast in high cutting. 4. Rapid recovery period of carbohydrate content after cutting and large amount of carbohydrate accumulation were showed in the cutting of July 15 and 25 compared with August 5 cutting in the reserve carbohydrate content against cutting of time and height during the mid-summer season. 5. Dry matter yield of the 4th and 5th cutting showed to be remarkable in July 15 cutting compared to those of July 25 and August 5. From the above results, it is suggested that the 10cm cutting height during the mid-summer season is the most effective for good regrowth, reserve carbohydrates and dry matter yield of orchardgrass.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.3
• /
• pp.183-189
• /
• 2006

Six japonica and three Tongil type cultivars that were released in different years and planted to a large area during different periods were grown at the experimental farm of Seoul National University in 2001 and compared for traits related to dry matter production and grain yield. The varieties chosen were Jodongji released in 1896, Paldal in 1944, Jinheung in 1962, Nagdong and Tongil (Tonsil type) in 1971, Milyang#23 (Tongil type) in 1976, Hwasung in 1986, Ilpum in 1991, and Dasan (Tonsil type) in 1996. The more recent cultivars tended to have lower canopy light extinction coefficients (K). The K value was 0.601 in the oldest cultivar, Jodongji, and decreased below 0.5 in the cultivars released since 1971. Radiation use efficiency (RUE) was significantly different among cultivars before heading stage, showing no consistent tendency with the year of release and not significantly different after heading. Leaf area duration (LAD) was significantly different among varieties, and LAD values tended to be higher in the more recent cultivars. In particular, this tendency was more obscure in Tongil type cultivars. LAD of whole growth period had a significantly positive correlation with dry matter yield at harvest $(r=0.776^*)$. Dry matters measured at heading and harvest tended to be higher in recently released cultivars, but not significantly. The grain yield of Jodongji was the lowest but there was no significant difference among the other varieties in japonica, while higher yield occurred in the more recent Tongil type. Grain yield was correlated with grain number per square meter, and the more recent Tongil type cultivars had the greater grain number per square meter, In conclusion, not only the dry matter and grain yield but also related traits except K value showed no clear changes when compared with the year of their release in japonica cultivars. However, the increased grain yield in the more recent Tonsil type cultivars might have resulted from the enhanced LAD that lead to the higher dry matter production and in turn to the enlarged sink size.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.3
• /
• pp.159-170
• /
• 2006

This study was conducted to investigate the effects of two dry matter levels of liquid swine manure on dry matter yield and nutritive value of Italian ryegrass, rye and oats, and the chemical characteristics of soil in Jeju. This experiment tested in split plot design. Three forage crops (Italian ryegrass, rye and oats) were the main plot and four fertilizers (no fertilizer=T0, chemical fertilizer=T1, liquid swine manure with DM 2.7%=T2 and liquid swine manure with DM 5.9 %=T3) were the sub plots. Yield and nutrient contents of forage crops and soil properties were determined. Application of liquid swine manure containing 5.9% dry matter resulted in highest DM yield in all three forage crops species compared with the other treatments (p<0.01). Crude protein content(%) and crude protein yield(kg/ha) of forage crops were highest in rye compared with the other forage crops species(p<0.01). K and Mg contents of soil were higher(p<0.01) in rye than in the other species while Na contents was higher(p<0.01) in Italian ryegrass than others. Mg content of soil appeared higher in rye than in the others and higher(p<0.05) in forage crops applied with liquid manure containing 2.7% DM compared with the other species. $NO_3-N$ contents in soil was lower in rye than the other species and higher in species with chemical fertilizer. These findings indicate that most of liquid swine manure produced on local pig farms containing low levels of dry matter and other nutrients suggest a low efficiency of its use as a fertilizer. The liquid swine manure is recommended as a fertilizer for rye production in winter, compared with Italian ryegrass or oat.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.1
• /
• pp.109-116
• /
• 2008

In this study, the breads with medicinal herbs (MH) composites showing immunostimulating activity were prepared and their characteristics were examined. Fourteen kinds of medicinal herbs were extracted with hot water and divided into 3 groups (MH-1, MH-2, MH-3) based on their contents. All groups showed immunostimulating activity in terms of macrophage phagocytosis, nitrite production, cytostatic activity and cytokine production. In the preparation of breads containing MH extracts of various contents (0, 30, 50, 70, and 100%), there was no significant difference among dough pHs of all groups after first fermentation, but loaf volume was significantly (p<0.05) increased in 70% added group while decreased in 30%, 50%, and 100% added groups compared to the control. The "a" and "b" values of bread crumb increased with the content of MH extracts while "L" value decreased, but these values of bread crust were similar to the control group. Most improvements in hardness, adhesiveness, gumminess and chewiness of bread were noticed by the addition of 70% MH extracts, but those of springiness, cohesiveness and resilience were mostly by the 50% addition ones. Through the sensory evaluation, it was revealed that mouth feeling, taste and overall preference decreased at breads containing 70% and 100% extracts, although appearance and crumb texture were not significantly (p<0.05) different among all groups.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.370-375
• /
• 2018

In order to promote the mechanized cultivation of perilla for seed, which has been increasing in cultivation area and production recently as demand increases according to the health-functional effects, we carried out this experiment to determine the optimum sowing time of perilla to minimize the seed loss at harvest and increase the yield. We used two different types of perilla varieties, 'Sodam(small-branch)' and 'Deulsaem(multi-branch)', and the sowing time was June 15, June 30, July 15 and August 1. As the sowing time is late, days of growth from sowing to flowering were shortened, and they were shortened from 14, 26 and 31~32 days on June 30, July 15 and August 1 as compared with June 15, respectively. And, the stem length and culm diameter were shortened or tapered and the number of nodes tended to decrease. The number of effective branch was 82%, 61% and 56% on June 30, July 15 and August 1 as compared with June 15, respectively. Accordingly, it seems to make against in securing the yield from July 15. And, the lowest cluster height was generally shorter as the sowing time is late, and the height was below 15cm on July 15 and August 1. It seems that this may work against the machine harvest. There was a high degree of significance between the sowing time and the yield. Although, the total yield was not statistically significant among June 15, June 30 and July 15, the ratio of shattering seed at harvest was in order of July 15, August 1(30.3%)> June 15(15.3%)> June 30(13.5%). Therefore, the net yield except for shattered seed was higher in order of June 30${\geq}$ June 15> July 15> August 1. This tendency was characteristic regardless of variety and sowing method. And, the protein content in perilla seed increased as the sowing time was delayed, and the content was the highest on August 1. The content of crude fat was relatively high on June 15 and July 15 in 'Sodam', and June 30 and July 15 in 'Deulsaem', respectively. And, the content of linolenic acid was found to be the highest on August 1. As a result, the optimal sowing time for machine harvest of perilla for seed is about June 30. At this time, it is determined that the sowing time is the most suitable to be advantageous in increasing the yield of perilla seed, while minimizing the seed loss due to the shattering at harvest.

• Korean Journal of Environment and Ecology
• /
• v.26 no.5
• /
• pp.730-740
• /
• 2012

Korea Expressway Corporation have a plan to make a new highway from East Hongcheon to Yanayang in Kangwon-do(province). This research was conducted to analyze a vegetation structure of japanese red pine forest and to prepare conservation and restoration basic information for minimizing the effects on pine mushroom producing by road construction. Considering the range of effects by road construction, twenty plots were set up near road construction reserved area, and surveyed. The result analyzed by TWINSPAN, one of the classification technique, showed that the communities were divided into four groups which are two Pinus densiflora community, Pinus densiflora-Quercus variabilis community and Pinus densiflora-Deciduous broad leaves forest community(IV). Species diversity index of each community ranged from $1.7353{\pm}0.0341$ to $1.9079{\pm}0.2471$, and the average number of species was $9.2{\pm}2.8$, especially $9.6{\pm}5.0$ at canopy layer in the unit area($100m^2$). The number of individuals ranged from 4 to 29 and average 9.55 in the unit area($100m^2$). The average RSI(relative space index) was below 35%, the average estimated age of the forest was $38{\pm}8.34$ years. The depth of $A_0$ layer of soil was 4~6cm and the range of soil acidity was pH4.70~5.63(average pH 5.29). Pine mushroom and Japanes red pine have a close symbiosis relation. Therefore it is needed that minimizing the read construction which goes through the pine mushroom producing area. If a road goes through a pine mushroom producing area, restoration measurement is prepared to prevent forest from rapid change such as succession or vegetation structure.