• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.217-231
• /
• 2017

The subsidence of ground in urban area can be caused by the occurrence of the cavity and the change in ground volumetric water content. The objective of this study is the detection of abnormal area of ground in urban area where the cavity or the change in ground volumetric water content is occurred by the ground penetrating radar signal. GPR survey is carried out on the test bed with a circular buried object. From the GPR survey, the signals filtered by the bandpass filtering are measured, and the methods consisting of gain function, time zero, background removal, deconvolution and display gain are applied to the filtered signals. As a result of application of the signal processing methods, the polarity of signal corresponds with the relation of electrical impedance of the cavity and the ground in test bed. In addition, the relative permittivity calculated by GPR signal is compared with that of predicted by volumetric water content of the test bed. The relative permittivities obtained from two different methods show similar values. Therefore, the abnormal area where the change in ground volumetric water content is occurred can be detected from the results of the GPR survey in case the depth of underground utilities is known. Signal processing methods and estimation of relative permittivity performed in this study may be effectively used to detect the abnormal area of ground in urban area.

• The Journal of the Korea Contents Association
• /
• v.18 no.8
• /
• pp.525-535
• /
• 2018

If the frequency of a particular class is excessively higher than the frequency of other classes in the classification problem, data imbalance problems occur, which make machine learning distorted. Corporate bankruptcy prediction often suffers from data imbalance problems since the ratio of insolvent companies is generally very low, whereas the ratio of solvent companies is very high. To mitigate these problems, it is required to apply a proper sampling technique. Until now, oversampling techniques which adjust the class distribution of a data set by sampling minor class with replacement have popularly been used. However, they are a risk of overfitting. Under this background, this study proposes ROSE(Random Over Sampling Examples) technique which is proposed by Menardi and Torelli in 2014 for the effective corporate bankruptcy prediction. The ROSE technique creates new learning samples by synthesizing the samples for learning, so it leads to better prediction accuracy of the classifiers while avoiding the risk of overfitting. Specifically, our study proposes to combine the ROSE method with SVM(support vector machine), which is known as the best binary classifier. We applied the proposed method to a real-world bankruptcy prediction case of a Korean major bank, and compared its performance with other sampling techniques. Experimental results showed that ROSE contributed to the improvement of the prediction accuracy of SVM in bankruptcy prediction compared to other techniques, with statistical significance. These results shed a light on the fact that ROSE can be a good alternative for resolving data imbalance problems of the prediction problems in social science area other than bankruptcy prediction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3748-3759
• /
• 2013

The purpose of this study was to examine the classification accuracies of ML, MAP, and EAP methods under DINA model. For this purpose, this study examined the classification accuracies of the classification methods under the various conditions: the number of attributes, the ability distribution of examinees, and test length. To accomplish this purpose, this study used a simulation method. For the simulation study, data was simulated under the various simulation conditions including the number of attributes (K= 5, 7), the ability distribution of examinees (high, middle, low), and test length (J= 15, 30, 45). Additionally, the percent of agreements between true skill patterns(true ${\alpha}$) and skill patterns estimated by the ML, MAP, and EAP methods were calculated. The summary of the main results of this study is as follows: First, When the number of attributes was 5 and 7, the EAP method showed relatively higher average in the percent of exact agreement than the ML and MAP methods. Second, under the same conditions, as the number of attributes increased, the average percent of exact agreement decreased in ML, MAP, and EAP methods. Third, when the prior distribution of examinees ability was different from low to high under the conditions of the same test length, the EAP method showed relatively higher average in the percent of exact agreement than those of the ML and MAP methods. Fourth, the average percent of exact agreement increased in all methods, ML, MAP, and EAP when the test length increased from 15 to 30 and 45 under the conditions of the same the ability distribution of examinees.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.213-219
• /
• 2013

The purpose of this study is to suggest a plan for which Medical Record Technician, who has main task as efficient creation and management of medical information, is changed successfully to health information manager in IT-based medical environment. According to this research objective, it carried out an analysis on future model(To-be) for being changed into health information manger in addition to analysis of the current situation for task as medical record technician. The subject materials of analyzing the present status included 1) state-exam subjects for medical record technician 2) qualification examination subjects for health information manger 3) analytical data of the current task for domestically medical record technicians 4) symposiums and educational topics for the recent 3 years in Korean Medical Record Association. Future-model(To-be) data included 'HIM Professional Roles in E-HIM (R)' suggested by AHIMA(American Health Information Management Association). Through a comparative analysis of these materials, a role of being needed currently medical record technicians' new entry was analyzed to be Business change manager, IT training specialist, Consumer advocate, Clinical alerts and reminders manager, and Enterprise application specialist.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.4
• /
• pp.5-14
• /
• 2016

Numerical simulation of dynamic soil-pile-structure interaction embedded in a dry sand was carried out. 3D model of the dynamic centrifuge model tests was formulated in a time domain to consider nonlinear behavior of soil using the finite difference method program, FLAC3D. As a modeling methodology, Mohr-Coulomb criteria was adopted as soil constitutive model. Soil nonlinearity was considered by adopting the hysteretic damping model, and an interface model which can simulate separation and slip between soil and pile was adopted. Simplified continuum modeling (Kim et al., 2012) was used as boundary condition to reduce analysis time. Calibration process for numerical modeling results and test results was performed through the parametric study. Verification process was then performed by comparing numerical modeling results with another test results. Based on the calibration and validation procedure, it is identified that proposed modeling method can properly simulate dynamic behavior of soil-pile system in dry condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1115-1122
• /
• 2013

Recently the demands for traffic information tend to increase, and travel time might one of the most important traffic information. To effectively estimate exact travel time, highly reliable traffic data collection is required. BIS(Bus Information System) data would be useful for the estimation of the route travel time because BIS is collecting data for the bus travel time on the main road of the city on real-time basis. Traditionally use of BIS data has been limited to the realm of bus operating but it has not been used for a variety of traffic categories. Therefore, this study estimates a route travel time on road networks in urban areas on the basis of real-time data of BIS and then eventually constructs regression models. These models use an explanatory variable that corresponds to bus travel time excluding service time at the bus stop. The results show that the coefficient of determination for the constructed regression model is more than 0.950. As a result of T-test performance with assistance from collected data and estimated model values, it is likely that the model is statistically significant with a confidence level of 95%. It is generally found that the estimation for the exact travel time on real-time basis is plausible if the BIS data is used.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.343-352
• /
• 2011

The water quantity by intake station as well as the tributary flow discharge acting as sink or source were added to the main flow rate in the present study and RMA-2 and RMA-4 models were applied to the reach from Pal-dang dam to Jam-sil submerged weir to investigate the influence of water supply withdrawal on the river flow and water quality. The numerical results revealed that the water supply withdrawal from 5 intake stations located upstream of Jam-sil submerged weir changed the total flow rate and therby induced different hydraulic characteristics in terms of water surface elevation and velocity. The changed flow field by the inclusion of water intake quantity led to the variation of water quality. By the consideration of the water supply withdrawal, the velocity structure was significantly disturbed by the outflowing flow condition nearby Gu-ui, Ja-yang, and Pung-nap intake stations. Furthermore, the mean velocity was lowered by 25% and the stage upstream of Gu-ui station rose upto 1.5 cm compared with the result by exclusion of water intake. In case of no water withdrawal, the distribution of BOD concentration was parallel throughout the domain. However, when the water withdrawal is considered, the distribution of BOD concentration nearby the Gu-ui, Am-sa, and Ja-yang station was signifiantly changed. In addition, the BOD concentration including the intake stations showed higher value at the downstream of the reach due to the loss of the discharge by water withdrawal effect. It is concluded that both the inflow and outflow discharges from tributaries and water intake stations should be included in the numerical simulation to analyze the hydrodynamic behaviors and mixing characteristics more accurately.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.501-510
• /
• 2014

Volcanic eruptions alone may lead to serious natural disasters, but the associated release of water from a caldera lake may be equally damaging. There is both historical and geological evidence of the past eruptions of Mt. Baekdusan, and the volcano, which has not erupted for over 100 years, has recently shown signs of reawakening. Action is required if we are to limit the social, political, cultural, and economic damage of any future eruption. This study aims to identify the area that would be inundated following a volcanic flood from the Cheon-Ji caldera lake that lies within Mt. Baekdusan. A scenario-based numerical analysis was performed to generate a flood hydrograph, and the parameters required were selected following a consideration of historical records from other volcanoes. The amount of water at the outer rim as a function of time was used as an upper boundary condition for the downstream routing process for a period of 10 days. Data from the USGS were used to generate a DEM with a resolution of 100 m, and remotely sensed satellite data from the moderate-resolution imaging spectroradiometer (MODIS) were used to show land cover and use. The simulation was generated using the software FLO-2D and was superposed on the remotely sensed map. The results show that the inundation area would cover about 80% of the urban area near Erdaobaihezhen assuming a 10 m/hr collapse rate, and 98% of the area would be flooded assuming a 100 m/hr collapse rate.

• Journal of Gifted/Talented Education
• /
• v.24 no.3
• /
• pp.421-444
• /
• 2014

In STEAM education, contents that has been extracted from a variety of areas, so it can work closely and systematically. Therefore STEAM education requires systems thinking that can be grasped effectively these different disciplines. The purposes of this study are to develop a STEAM program based on systems thinking, and apply the program to the secondary science gifted student in order to investigate the educational effect. A model of the Program developed from previous research and theoretical contents of systems thinking and STEAM. A draft of the STEAM program was developed on the theme of "rocket". A total of 113 students was participated in this study. 100 seventh and 13 eighth graders were enrolled at seigy. A single group pre-post test paired t-test was conducted on them in systems thinking skills. Result of applying the program to the students as follows. The systems thinking ability was improved after the application of the program. 'Mental Model', 'Personal Skill', 'Team Learning', and 'System Analysis', 'Shared Vision' emerged for both improved significantly. In conclusion, the STEAM program based on system thinking improves students' systems thinking skills. This program of results can be helpful in cultivate human resources with the problem solving ability based on system thinking and STEAM literacy by used in public education curriculum.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.312-319
• /
• 2013

Our understanding of the sensitivities of crop responses to changes in carbon dioxide, temperature, and water is limited, which makes it difficult to fully utilize crop models in assessing the impact of climate change on future agricultural production. Genetic coefficients of CERES-Barley model for major domestic cultivars in South Korea (Olbori at Suwon, Albori at Milyang, Saessalbori at Iksan, and Samdobori at Jinju) were estimated from the observed data for daily weather and field trials for more than 10 years by using GenCalc in DSSAT. Data from 1997-2002 annual crop status report (Rural Development Administration, RDA) were used to validate the crop coefficients. The sitecalibrated CERES-Barley model was used to perform crop growth simulation with the 99 treatments of step change combinations in temperature, precipitation and carbon dioxide concentration with respect to the baseline climate (1981-2010) at four sites. The upper boundary corresponds to the 2071-2100 climate outlook from the RCP 8.5 scenario. The response surface of grain yield showed a distinct pattern of model behavior under the combined change in environmental variables. The simulated grain yield was most sensitive to $CO_2$ concentration, least sensitive to precipitation, and showing a variable response to temperature depending on cultivar. The emulated impacts of response surfaces are expected to facilitate assessment of projected climate impacts on a given cultivar in South Korea.