• Journal of Dairy Science and Biotechnology
• /
• v.14 no.2
• /
• pp.147-155
• /
• 1996

This experiment was carried out to find general composition and mineral contents such as Ca, P, Mg, Na, K and Fe of domestic commercials Mozzarella cheese. Twenty-five products of 5 company were analyzed. The results obtained were as fellow : The average contents of moisture, fat, fat in dry matter, protein and ash in Mozzarella cheese were 49.01, 22.54, 44.16, 24.36 and 2.55%, respectively and average pH was 5.29. The average contents of Ca, P, Mg, Na, K and Fe were 696.44, 466.31, 22.08, 310.8, 82.84 and 0.36mg, respectively. Among products, product C was highest in levels of Ca, P and Mg, which were 797.4, 536.6 and 25.5mg, respectively, Na was highest for product A which contained 450.8mg. K and Fe were highest for product B which contained 98.9 and 0.51mg, respectively. Generally, the ratio of Ca to P was 1.5 : 1 and within the proper range. It was found that 645g of Mozzarella cheese was able to fully meet the daily recommendation of minerals including Ca, P and Na.

• Journal of Dairy Science and Biotechnology
• /
• v.32 no.2
• /
• pp.141-145
• /
• 2014

There is a burgeoning number of products on the market that contain probiotics, but do they do you any good? What exactly are probiotics? They have been defined as living organisms that, when ingested in sufficient quantities, provide health benefits beyond basic nutrition. They are often referred to as "friendly bacteria" or "good bacteria." Probiotics have been claimed, amongst other things, to (i) reduce the incidence of colon cancer and other diseases of the colon, such as IBS, (ii) stimulate the immune system, (iii) have anti-hypertensive and anti-cholesterolemic properties, (iv) mitigate against the effect of antibiotics on the intestinal microbiota, and (v) protect against gastrointestinal infections. However, the scientific basis for many of these claims is not well-established. Indeed, the European Food Safety Authority has denied the use of several health claims associated with probiotics, particularly those related to mitigation of diarrhea following consumption of antibiotics. Thus, there is a need for research on the mechanisms of action of probiotics. We have been mainly interested in the use of probiotics to control enteric infections. There are several possible modes of action to explain how probiotics may protect the host from enteric pathogens, including competitive exclusion and immunomodulation. We have shown that probiotics produce bioactive molecules that interfere with bacterial cell-cell communication (also called quorum sensing), and this results in a down-regulation of virulence genes that are responsible for attachment of the pathogen to the gastrointestinal epithelium. These bioactive molecules act on a variety of bacteria, including enterohemorrhagic and enterotoxigenic Escherichia coli, Salmonella, Clostridium difficile and Clostridium perfringens, and there is evidence that they can inhibit the formation of biofilms by Listeria monocytogenes. These bioactive molecules, which are peptidic in nature, can exert their effects not only in vitro but also in vivo, and we have shown that they mitigate against E. coli O157:H7 and Salmonella in mice and Salmonella and E. coli K88 infections in pigs. They can be delivered in foods such as yoghurt and maintain their activity.

• Archives of design research
• /
• v.17 no.3
• /
• pp.111-122
• /
• 2004

The purpose of this study are two the first is to identify the positioning of product design and analyze its functional relationship with product development, manufacturing, marketing and sales in the comprehensive competitiveness evaluation model ; and the second is to estimate the determinants of QCI(quality competitiveness index), analyze the impact of product design on QCI, and compare the aforementioned results for the seven industrial sectors and the five product patterns. For this empirical analysis, this study surveyed 400 Korean manufacturing firms during August-October 2003. The major empirical findings are summarized as follows : First, the hypothesis on the positive effect of product design on QCI is accepted at a highly significant level (p < 0.001) for all : the manufacturing sector, seven industrial sectors, and five product categories. Second, the correlation analysis and factor analysis lead to the result that the effect of product design on QCI is estimated to be relatively very low, in comparison to those of product functionality and basic performance on QCI. These findings imply that Korean manufacturing sector has been still in the prematured stage at which product design has not played an important role yet. This study concludes that product design in line with other functions (product development, manufacturing, marketing, and sales) should make a good contribution to the improvement of QCI in the future.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.285-290
• /
• 2016

In rural area, our farmers confront decreasing benefits owing to imported crops and increased cost. Recently, the government encourage the 6th Industry that merges farming, rural resources, and information and communication technology. Therefor the government makes an investment in supplying 'smart greenhouse' in which a farmer monitor growing crops and environment information to control growing condition. The objective of this study is developing an Moving Monitor and Control System for crops in green House. This system includes a movable sensing unit, a controlling unit, and a server PC unit. The movable sensing unit contains high resolution IP camera, temperature and humidity sensor and WiFi repeater. It rolls on a rail hanging beneath the ceiling of a green house. The controlling unit contains embedded PC, PLC module, WiFi router, and BLDC motor to drive the movable sensing unit. And the server PC unit contains a integrated farm management software and home pages and databases in which the images of crops and environment informations. The movable sensing unit moves widely in a green house and gathers lots of information. The server saves these informations and provides them to customers with the direct commercing web page. This system will help farmers to control house environment and sales their crops in online market. Eventually It will be helpful for farmers to increase their benefits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.596-608
• /
• 2017

In 2002, the government arranged an institutional strategy to make it possible for a consumers to make a claim for damages caused by product defects against a business that produces and sells a product by enforcing the Product Liability Law(hereinafter referred to as 'PL'). On the other hand, due to the recent humidifier sterilizer accident, approximately 12 cases of related bills, such as a revised bill for the product liability law, have been proposed to the National Assembly at present in an effort to introduce the group action system and punitive compensation system for the purpose of the strengthening of the corporate product liability, and consumer damage relief. Ironically, as much as 62.6% of small & medium businesses, which are actual interested parties to this bill, are unaware of this. Many companies are responding to PL with the rationalization of document preparation & storage, clarification of responsibility relations with related business operators, and PL insurance policy purchase, or securing compensation funds as a means of Product Liability Defense(PLD), but the methods of preparation such as this leave much room for limits on the considerations of product design and product safety. This paper presents the individual management system model with more focus on product safety by looking into the clear concept of PL and the countermeasures against it, grasping the relevance between the PL system and individual management system, and integrating the PL response system in preparation for the PL. It is hoped that the result of this research objective will be evaluated as a rational countermeasure for small & medium businesses to respond effectively to the PL.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.197-197
• /
• 2019

총인처리시설에서는 응집제를 주입하여 인이나 오염물질을 침전시켜 처리하고 있으며 PAC(poly aluminum chloride)나 $FeCl_3$, $Al_2(SO_4)_3$, 등 다양한 종류의 응집제가 사용되어지고 있다. 하지만 기존에 사용되어 지고 있는 알루미늄계열의 응집제는 처리수에 잔류이온이 존재하게 되어 인체에 축적돼 알츠하이머 병 등 신체질환을 유발할 수 있는 단점이 있다. 따라서 이러한 단점을 사전에 예방하기 위해 $TiCl_4$와 같은 티타늄계열 응집제에 대한 연구가 진행되고 있다. $TiCl_4$ 응집제는 인 제거에 효과적으로 적용할 수 있으며 수중에 잔류이온을 유발하지 않으며 Ti이온은 치과임플란트나 의료장비로 사용될 만큼 인체에 무해하다고 알려져 있다. 응집제 사용에 따라 생성된 응집슬러지의 처리방안에 있어서 기존 응집제의 경우 생성된 슬러지의 대부분은 하수슬러지 위탁처리업체를 통해 소각 및 매립, 재활용 되고 있으나, $TiCl_4$를 응집제로 사용할 경우 생성된 슬러지를 인발하여 건조 및 소성을 통해 이산화티타늄으로 재활용할 수 있어 슬러지를 친환경적으로 처리가 가능해 기존 슬러지 처리방안의 경제적, 환경적 부담을 줄일 수 있는 장점이 있다. 따라서 본 연구에서는 $TiCl_4$를 하수처리장 방류수에 주입하여 수중의 총인(T-P)을 처리한 후 생성된 슬러지를 인발하여 건조와 소성과정을 거쳐 이산화티타늄을 제조하였다. 방류수를 취수해 2.5mg/L의 초기 총인 농도를 가진 원수를 제조하였으며 제조된 원수에 $TiCl_4$를 0.6mL 주입하였을 때 99.93%의 총인제거효율을 얻을 수 있었다. 응집 실험 후 생성된 슬러지를 인발하여 건조 후 $300{\sim}1000^{\circ}C$의 각각 다른 온도조건에서 소성하여 이산화티타늄을 제조하였으며, SEM과 XRD를 통해 제조된 이산화티타늄의 표면특성과 결정성 분석을 실시하였다. 제조된 이산화티타늄은 $500{\sim}800^{\circ}C$에서는 아나타제, $900{\sim}1000^{\circ}C$에서는 루타일 결정구조가 나타났다. 또한, $TiCl_4$ 주입량에 따른 이산화티타늄의 최종 생산량과 제조 시 사용되는 건조로 및 소성로의 경제적 비용 등을 고려하여 이산화티타늄 1Ton을 제조하기 위해 필요한 단가를 산출하였다. 본 연구에서 제조된 이산화티타늄 1kg의 생산단가는 약 5,400원으로 나타났으며, 가장 많이 사용되는 P-25 광촉매 보다 저렴한 가격으로 제조 및 판매를 기대할 수 있다. 따라서 하수처리장에 적용 시 기존 응집제 보다 비싼 $TiCl_4$ 비용을 보완하고 친환경적인 슬러지 처리로 제조된 이산화티타늄의 유통 및 현장적용을 통해 경제적, 환경적으로 우수하다고 판단된다.

• Journal of Korean Society of Forest Science
• /
• v.107 no.4
• /
• pp.378-384
• /
• 2018

Chinese jujube (Ziziphus jujuba Mill.), a member of family Rhamnaceae, is an economically important species. It has high nutritional value in fruits, and its medicinal properties have led to extensive use in traditional oriental medicine. In this study, we investigated the genetic characteristics of 270 jujube germplasms collected from the six major jujube fruit production areas in Korea including Boeun and Gyeongsan, in order to understand the current situation on cultivated varieties of domestic jujube and to obtain useful data for selection of superior germplasms and establishing their breeding plans. The results of ISSR marker analysis revealed that the Shannon's information index of the 270 germplasms was 0.107 and the genetic similarity was as high as 0.935 showing the dominance of a specific cultivar or germplasm, and almost 67% (180) of them were identified at the same genotype with 'Bokjo'. The domestic commercial jujube populations could be characterized by very low genetic diversity and thus may be vulnerable to external disturbances. In addition, it seems that most of the jujube fruits in domestic market were largely produced through parthenocarpy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.240-246
• /
• 2019

The noise generated by construction machinery operating at construction sites is a major cause of environmental disputes with nearby residents. To reduce construction site noise, low noise construction machinery and low noise methods are recommended to be used first. In addition, the possible noise should be predicted and preventive measures suitable for the noise source should be taken. This study analyzed the sound power level of an excavator, which is used most frequently at construction sites. The sound power level of 297 excavators sold in Korea after 2008 were analyzed and the sound power level was classified according to the type, output (kW), and production site of the excavator engine based on the measured data. As a result, the sound power level decreased by 1 dBA depending on the change in engine type and the sound power level increased by approximately 3 dB (A) when the engine output was doubled. In addition, the sound power level was low in small-sized products of less than 55 kW for overseas products and medium and small-sized products of 55 to 104 kW for domestic products.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.520-527
• /
• 2019

In this study, the technical level and competence of Chungbuk region manufactures were diagnosed and implications for efficiency improvement of cooperation with local universities were derived. The results are as follow. First, in Chungbuk area, 75% of the skilled workers are medium-skilled and high skilled workers. And the life cycle of production products was found to have entered middle/old age. In addition, the industries were overestimating its technology capabilities, including marketing and sales technology, and management technology. Therefore, local universities should develop differentiated program such as technology transfer and commercialization support so that companies can nurture new industries and it is necessary to improve understanding of reality and future prediction ability through various education and seminars. Second, universities in Chungbuk province have failed to meet the practical demands of industry by providing general educational programs such as lifelong education curriculum, rather than the practical training required by industry. First of all, industries needed the practical training programs such as human resource empowerment, technical education and workers' retraining for local industry development. In addition, industries were expected to provide relevant knowledge and infrastructure such as testing, analysis, participation in technology development such as commissioning and joint research. Therefore, universities should prepare customized Industry-Academia Cooperation Programs through industry demand survey in planning. Also, it is necessary to establish various connection points with industry to ensure that industry-academia cooperation will continue and achieve results. Third, the technology of the industries in Chungbuk province was found to be very unrelated to the next generation regional strategic industries. This is not shared vision between industry and local government, Industry-Academia Cooperation Programs will serve as a platform to organize various community entities. Universities will be able to play a key role in between industries and local governments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.453-459
• /
• 2021

The system marginal price of electricity is the amount paid to all the generating units, which is an important decision-making factor for the construction and maintenance of an electrical power unit. In this paper, we suggest a long-term forecasting model for calculating the system marginal price based on prices of natural gas and oil. As most variables used in the analysis are nonstationary time series, the long run relationship among the variables should be examined by cointegration tests. The forecasting model is similar to an error correction model which consists of a long run cointegrating equation and another equation for short run dynamics. To mitigate the robustness issue arising from the relatively small data sample, this study employs various testing and estimating methods. Compared to previous studies, this paper considers multiple fuel prices in the forecasting model of system marginal price, and provides greater emphasis on the robustness of analysis. As none of the cointegrating relations associated with system marginal price, natural gas price and oil price are excluded, three error correction models are estimated. Considering the root mean squared error and mean absolute error, the model based on the cointegrating relation between system marginal price and natural gas price performs best in the out-of-sample forecast.