• Journal of Plant Biotechnology
• /
• v.42 no.2
• /
• pp.117-122
• /
• 2015

Canola is a crop globally used for production of oil and biofuel. Cultivation area and import volume of living modified (LM) canola have been increasing every year. As canola import dependence has reached 100% in Korea, efforts have been made for safety management of LM canola and ecological risk assessment. We developed a set of multiplex PCR method for simultaneous detection of 5 LM canola events (Topas 19/2, Rf3, Ms8, RT73 and T45) approved in Korea. The multiplex PCR assay developed allows amplification of estimated products of 5 LM canolas from event specific primer sets. Primer extension time was skipped for a time-consuming process and two annealing steps (20 cycles at $55^{\circ}C$ and 20 cycles at $60^{\circ}C$) were performed for yielding the best result which was sufficient to distinguish five LM canolas. Our results suggest that multiplex PCR method provides a cost and time-effective approach for LM canola detection.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.209-218
• /
• 1999

처방전달시스템은 처방의 수행은 의사가, 그에 따른 의약품조제는 약사가 수행함으로써 의약품의 오․남용을 방지하기 위한 의약분업의 실시에 따른 국민불편의 최소화와 약화사고에 따른 인증문제 등을 지원하기 위한 정보시스템이다. 처방전달시스템은 환자 개인정보의 허용된 범위 내에서의 공유와 공유를 위한 각종 개인정보 보호장치, 처방의 안전한 전달을 위한 내용의 비밀보장과 위변조방지 및 송신자와 수신자의 인증을 위한 장치가 필수적으로 필요하다. 또한 자료의 생명주기 측면에서 본다면, 처방전의 생성은 병․의원에서 이루어지며 소멸은 약국 및 환자에의해 이루어진다. 자료의 유통과정에 살펴보면 처방전달시스템의 주요성공요인은 정보의 생산자인 병․의원(의사)의 적극적인 정보제공의지와 이를 지원하는 편리한 정보시스템의 구축이라고 할 수 있다. 정보의 생산자인 병․의원 정보시스템 환경은 다양하고 복잡하기 때문에 기존의 애플리케이션을 이용하면서 처방의 전송을 위해서는 기존 애플리케이션 및 플랫폼에 독립적이며 자료의 적합한 취합과 통합이 가능하도록 지원하는 시스템이 필요하다. 처방전달 메시징시스템은 이러한 복합적인 정보시스템 환경을 지원하며 동시에 처방정보의 안전한 전달을 위해 플랫폼으로 실행될 수 있는 시스템을 말한다. 또한 처방의 비교적 짧은 생명주기와 지역적 생산, 유통구조를 적합하게 지원하기 위해 지역별 독립시스템의 구축과 공통정보 활용을 위한 중앙시스템과의 역할분담 모델에 근거한 분산시스템의 구축이 요구된다. 본 연구에서의 처방전달 메시징시스템은 일반적인 메시지서비스의 특성을 기본으로 자료전달을 위해 자료 암호화와 복호화, 송신자와 수신자에 대한 인증 및 자료접근 제한기능을 제공하며 각 클라이언트와 서버간의 실시간 연결 혹은 지연연결을 지원하는 독립적인 애플리케이션이다. 이러한 처방전달 메시징시스템을 구성하는 각 요소에 대해 정의하고 개념적 모델을 설계하고자 한다.에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다., 취약계층을 위한 일차의료, 의약관리), ${\circled}2$ 보건소 조직 개편 및 민간의료기관과 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different among mature stages. According to these results, the yellow ripe period is appropriate to harvest the whole crop rice for forage considering dry matter yields,

• Korean journal of communication and information
• /
• v.66
• /
• pp.28-58
• /
• 2014

South Korean broadcasting industry has been under a significant level of structural change since the permission of new general programming channels in the end of 2010. One of the most characteristic features of the change may be the exodus of core manpower from the in-house productions of major terrestrial broadcasters which have been maintaining their dominant power over broadcasting content market based on their systems of tight vertical integration. This paper sheds light on the presence of a purposeful 'mechanism design' that aims to the expansion of market logics in South Korean broadcasting sector by promoting commercial media conglomerates, and analyses how this external design has been actualized while being interlocked with various internal factors of the broadcasting industry. This paper shows that on the backdrop of the mechanism design, some of new media conglomerates has successfully provided various incentives in contrast with those disincentive of terrestrial broadcasters, which in turn, has facilitated the exodus of elite producers. This paper, however, raises a set of questions about whether this relocation process of creativity led by commercial media conglomerates would, in the long term, guarantee more opportunities and potentials for the producers, as promised. As part of conclusion, inherent problems of present mechanism design are highlighted.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.

• Journal of Life Science
• /
• v.15 no.3 s.70
• /
• pp.374-381
• /
• 2005

The production of functional foods providing health benefit is one of the fast growing fields in the food industry. Mannitol as GRAS (generally recognized as safe) is a functional food. Mannitol is about $70\%$ as sweet as sucrose and slowly and incompletely absorbed from the intestine, suppling only about one-half energy value of glucose. Commercially, the mannitol is synthesized by catalytic or electrochemical reduction of glucose. However, as strong demand for natural products increased, biological techniques have been developed for mannitol production. The object of this study was to determine the optimum conditions of mannitol fermentation by Leuconostoc mesenteroides sp. strain JFY isolated from fermented vegetables. The processes parameters such as pH, temperature, yeast extract concentration, and fructose concentration were optimized. The chosen ranges were 4.5 to 7.5 for pH, 22 to $34^{\circ}C$ for temperature, 0.05 to $2.0\%$ for yeast extract. and 5 to 350 g/L for fructose. The mineral medium used consisted of 3.0g $KH_2PO_4,\;0.01g\;FeSO_4{\cdot}H_2O,\;0.01g\;MnSO_4{\cdot}4H_2O,\;0.2g\; MgSO_4{\cdot}7H_2O,\;0.01g\;NaCl,\;and\;0.05g\;CaCl_2$ per 1 liter of deionized water. The optimum values of pH, temperature, yeast extract, and fructose concentration were obtained at about pH 6.5, temperature $28^{\circ}C$, yeast extract $0.5\%$ and fructose 30g/L. At optimum condition, the production of mannitol amounted to 31.6g/l. We hope that these findings are of particular importance for industrial application of mannitol production.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.343-343
• /
• 1999

아크용접은 산업전반에 걸쳐 그 생산기반에 없어서는 안될 필수기술로써 자동차 및 조선, 항공우주산업에 이르기까지 경제기반에 미치는 파급효과가 매우 크다. 그러나 이 아크용접을 하게 되면 각종 가스와 미세입자로 이루어진 흄이 발생하게 되는데 이들은 작업자들의 건강에 많은 영향을 미치는 것으로 보고되어 있다. 용접흄에는 용접재료 및 용접공정에 따라 다양한 유해원소가 포함되어 있고 그 종류에 따라 인체에 미치는 잠재적 독성효과도 매우 광범위하다. 최근 국내에서는 용접사들 중에 용접흄에 포함된 중금속 중 Mn중독에 의한 파킨스씨병 환자들과 Cr중독에 의하여 콧속 연골에 구멍이 뚫리는 비중격천공(鼻中隔穿孔) 환자들이 직업병으로 판정 받아 산재요양이 승인된 사례가 있다. 이러한 계기로 인하여 용접사들의 용접기피 현상이 심화되고 작업환경에 대한 법적규제는 선진 외국뿐만 아니라 국내에서도 한층 엄격하게 강화되고 있는 실정이다. 따라서 이제는 작업자와 사용자 모두 용접흄에 대한 인식의 전환이 요구되는 때이며 여러 분야에서 이러한 용접흄에 대한 연구가 활발히 진행되어야 한다. 해외에서는 이미 용접흄에 대한 연구가 활발히 진행되어 왔으나 국내의 경우는 매우 미비한 상태이며 용접산업의 미래 영향력이나 필요성을 고려할 때 국내에서도 적극적인 관심을 가져야 할 부분으로 판단된다. 본 연구에서는 아크용접공정에서 발생하는 흄의 특정 중금속 성분이 인체에 치명적인 악영향을 미치는 것에 착안하여 여러 종류의 용접재료에서 발생되는 용접흄의 중금속 분포를 조사하여 비교하였다. 이것은 향후 용접재료별 및 용접공정별 발생되는 흄의 유해원소를 저감시킬 수 있고 또한 각종 유해원소의 노출기준 및 평가기준을 마련할 수 있는 기초data로써 도움이 되리라 사료된다.동, 공정중재고가 줄어드는 결과를 보였고, 가동률 수준이 높을수록 ORR 방법간의 차이가 크게 나타났다. 그리고 부하평준화 기능은 Order Release 정책의 유효성에 별 영향을 주지 않는 것으로 나타났다. 결론적으로, Order Release 방법은 우선순위규칙간의 성능차이를 줄이거나, 대체할 수 통제 기법이라기보다는 우선순위규칙을 보완하여 공정중재고와 작업현장에서의 리드타임, 리드타임의 편차를 줄여주는 역할을 한다고 볼 수 있다. 그리고, 계획시스템이 존재하여 계획오더가 일정기간간격으로 이송되는 환경에서 특히 유용하다는 결론을 얻었다. 알 수 있었다. 것인데, 제조업에서의 심각한 고비용, 저효율 문제 를 해결하기 위해 필수적으로 도입해야만 하는 실정이다. 또한 소비자의 다양한 요구로 인 하여 제품의 종류와 사양면에서 심한 변동을 보이는 시장 수요에, 신속한 정보처리로 대응 하는데도 크게 기여하고 있다. 이에 본 연구에서는, 자동차 Job Shop의 동기화 생산방식을 지원하는 동기화 생산시스템의 구축 모델을 제시하고자 한다.과로 여겨지며, 또한 혈청중의 ALT, ALP 및 LDH활성을 유의성있게 감소시키므로서 감잎 phenolic compounds가 에탄올에 의한 간세포 손상에 대한 해독 및 보호작용이 있는 것으로 사료된다.반적으로 홍삼 제조시 내공의 발생은 제조공정에서 나타나는 경우가 많으며, 내백의 경우는 홍삼으로 가공되면서 발생하는 경우가 있고, 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(min

• Food Science and Industry
• /
• v.52 no.2
• /
• pp.153-170
• /
• 2019

With the breathtaking stride beingmade in the field of biotechnology, biocatalyst research using genetically modified microorganism (GMM) is actively being pursued in food industry. However, domestic food and food additive regulation standards and the number of examination management examples currently used in industry is lacking significantly. Up till now, there are only 6 examples of domestic GMM examination and approval cases for food production purposes and furthermore they are limited to the production of functional sweeteners. Domestically, although GMM is developed as a processing aid (contained use), if they are used in the production of food, the safety of GMM, including environmental safety, is evaluated. Also the produced food or food additives using GMM need to be separately examined and approved as a novel food. On the other hand, imported products produced using GMM need to gain approval for the final product only. Thus the expense and the time to obtain regulatory approval is advantageous for imported products versus domestically produced products. This commentary is written to create the opportunity to reform the current domestic food GMM regulation by comparing and discussing domestic and foreign case analyses of safety evaluation of GMM and related regulations.

• Journal of Plant Biotechnology
• /
• v.35 no.4
• /
• pp.245-256
• /
• 2008

The current legislation in South Korea clearly states that the tolerance threshold on the adventitious presence of GMO in environment-friendly agricultural products is 3.0% and no GM seed should be detected in their planting seed batches. To date, in Korea, there is no approved GM crop for commercial cultivation in field. However, several GM crops including rice, Chinese cabbage, potato and wild turf grass are currently under risk assessment for their environmental release. Also Korean government (Rural Development Administration, RDA) announced that 11 institutes including universities have been currently certified to carry out a risk assessment of GM crops. Meanwhile, the cultivated area and certified quantities of environment-friendly crops (organic, pesticide-free and low-pesticide) are sharply increasing every year according to the report of National Agricultural Products Quality Management Service (NAQS). In detail, in 2007, the certified quantities of environment-friendly agricultural products were elevated up to 100-fold for organic, 171-fold for pesticide-free and 2,324-fold for low-pesticide crops when compared with those in 1999. The total certified quantity of environment-friendly cereal crops in 2007 was equivalent to 6.4% of total production of cereal crops. Moreover, 24% of total production of root and tuber crops such as potato and sweet potato were certified for environment-friendly agricultural products. In these circumstances, I strongly suggest that current legislations on GM crop's safety management should be revised to include strategies for the coexistence of GM with non-GM crops, especially environment-friendly crops before GM crop is approved to be cultivated for commercialization. Since all types of crops are grown in an open environment, the adventitious presence of GM crops among non-GM crops is inevitable if appropriate measures for coexistence are not established for species by species such as isolation distance, workable management measures to minimize admixture.

• Convergence Security Journal
• /
• v.14 no.3_1
• /
• pp.35-44
• /
• 2014

It has been shown that the lack of sufficient defense industry cooperation between Korea and the US. The severe imbalance in defense trade between tow countries and Korea's weak defense industrial base has been a problem. This paper suggests the enhancement of defense industry cooperation with the US as a defense policy. The US policy has been changed to utilize the globalization of defense industries. The following cases were analyzed to show the policy change; The security of supply arrangement with 6 countries, the defense cooperation treaty with the United Kingdom and Australia. the defense Memorandum of Understanding with 23 countries, and the international cooperation with 8 countries for F-35 JSF program. Korea government needs to sign a defense MOU with U.S. and the defense industries are recommended to increase the opportunities of weapon system co-development and co-production. So that the Korea defense industry may improve competitiveness and to overcome the current weaknesses.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.160-166
• /
• 1999

High cell density cultivation of microalga Dunaliella bardawil using nitrogen fed-batch cultures was studied in batch flask. Optimum environmental conditions include concentrated nutrients except NaCl and carbon sources, carbon sources, pH, light, agitation, nitrate and phosphate ions. Cell growth, consumption rates of nitrate and phosphate ions were monitored. Optimal conditions for higher cell density were found to be(in the range tested): 5 times concentrated media(1 times-10 times concentrated media) pH 8.0 (7.0-9.0) white light(blue and red light) 15mM of nitrate (0.94-15mM) 250mM $NaHCO_3$ and $CO_2$ gas. However, the addition of phosphate ions did not enhance the algal maximum cell density and specific growth rate. Nitrate was found to be effective for the cell growth. The maximum cell density of fed-batch culture using nitrate ions in $8.955{\times}106$cells/ml after 189hr incubation.