• Korean Journal of Microbiology
• /
• v.33 no.3
• /
• pp.193-198
• /
• 1997

Microorganisms capable of producing biosurfactant were isolated from oil-contaminated soils and seawater. Among them, the selected strain SW1 was identified as Pseudomonas sp. by taxonomical characteristic tests, and so tentatively named Pseudomonas sp. SWI. The optimal temperature and initial pH for biosurfactant production were TEX>30^{\circ}C.$ and 7.0, respectively. The optimal medium composilion for the production of biosurfactant by Pseudomonas sp. SW1 were hexadecane of 2.0%, yeast extract of 0.04%, $K_{2}HPO_4$ of 0.02%, $KH_2PO_4$ of 0.03% and $MgSO_4$ center dot $7H_2O$ of 0.04%, respectively. Under the above conditions, minimum wrface tension was 32 mN/m after incubation of 2 days. The biosurfactant was produced during initial stationary phase in the optimal medium. Pseudotnonas sp. SWl utilized various hydrocarbons such as Bunker oils, n-alkanes and branched alkanes as a sole carbon source.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.109-114
• /
• 2005

A bacterium capable of emulsifying hydrocarbon, n-hexadecane, and decreasing surface tension of the culture media using oil collapsing method was isolated. The bacterium was partially identified as Bacillus sp. and named BJS-51. n-Hexadecane was the most effective carbon source for production of biosurfactant. Surface tension was decreased from 76 dyne/cm to 31 dyne/cm and CMD (critical micelle dilution) had the highest value of 5.7 at 3% n-hexadecane. Ammonium phosphate was the most effective nitrogen source, when C/N ratio was 60, surface tension and CMD were 29 dyne/cm and 9.2, respectively. Optimum pH and temperature were 7.2 and $30^{\circ}C$, respectively. Produced biosurfactant was extracted and purified using organic solvent extraction method and preparative HPLC systems. After analysis by various color reaction, this biosurfactant was identified as lipopolysaccharide. Surface tension and CMC (critical micelle concentration) of purified biosurfactant were 27 dyne/cm and 0.08 g/l, repectively. CMD was 9.2, so the yield of biosurfactant was about 0.74 g/l at the optimal conditions. The biosurfactant was very stable at wide range of $pH\;2{\sim}12$ with surface tension $29{\sim}31\;dyne/cm$ and showed $29{\sim}30\;dyne/cm$ of surface tension after heat treatment at $100^{\circ}C$ for 60 min.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.65-70
• /
• 1998

The physiochemical properties of extracellular lipid produced by an oleaginous yeast, Rhodotorula glutinis K-501 were examined. From the analytical experiments, it was suggested that the extracellular lipid produced is glycolipidic compound. Critical micelle concentration and minimum surface tension of the extracellular lipid in aqueous solution were 89mg/L and 31dyne/cm, respectively. Surface tension was also constant throughout wide range of pH. The emulsifying abilities and dispersing power of the extracellular lipid were much greater than those of commercial surfactants such as Tween 80 and Triton X-100 by factors of 2-3 and 1.3, respectively.

• Korean Journal of Microbiology
• /
• v.42 no.4
• /
• pp.286-293
• /
• 2006

Three hundred thirty two bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in Daejon area. Among them, one bacterial strain was selected for this study based on its low surface tension ability, and this selected bacterial strain was identified as Pseudomonas sp. G314 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. G314 showed a high resistance to antibiotics such as ampicillin, chloramphenicol, spectinomycin, and streptomycin, and heavy metals such as Li, Cr, and Mn. It was found that the optimal pH and temperature for biosurfactant production of Pseudomonas sp. G314 were pH 7.0 and $30^{\circ}C$, respectively. After seven hours of inoculated, the biosurfactant activity reached the maximum, and surface tension of the culture broth was decreased from 72 to 25 dyne/cm. The crude biosurfactant was obtained from the culture broth by acid precipitation, followed by solvent extraction, evaporation and then freeze drying. The CMC (critical micelle concentration) value of the crude biosurfactant was 20 mg/L.

• The Microorganisms and Industry
• /
• v.14 no.3
• /
• pp.37-40
• /
• 1988

미생물에 의해서 생성되는 계면 활성제는 매우 다양하며, 그 특성은 사용되는 기질과 배양조건 등에 따라 다르게 된다. 일반적으로 소수성 부분은 대부분 지방산으로 이루어진 탄화수소 사슬이지만, 친수성 부분은 alcohol, ester등을 비롯하여 인산 또는 황산기와 같이 이온 그룹으로 구성되는 등 다양하다. 대부분의 biosurfactant는 생분해가 가능하며 독성이 없다. 따라서 오염문제를 야기하지 않으며 생물체에 적용가능한 장점을 갖고 있다. 따라서 앞으로 미생물을 이용한 biosurfactant의 개발및 응용가능성은 매우 높다고 볼 수 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.177.2-177.2
• /
• 2011

세계적인 자원고갈과 지구온난화와 같은 환경문제가 발생됨에 따라 대체에너지 개발에 대한 연구가 활발히 이루어지고 있다. 섬유소 기질을 이용한 바이오에탄올 생산은 세계적으로 막대한 자원이 있으며 광합성에 의해 재생산되는 무한한 재원으로서 환경적으로도 대기오염물질을 적게 배출하여 유용한 에너지원으로 각광받고 있다. 하지만 섬유소 기질은 cellulose, hemicellulose, lignin과 같은 고분자 화합물이 유기적으로 결합된 단단한 결정구조로 이루어져 있어 이를 분해하여 원하는 물질을 얻기 위해서는 전처리 과정이 필요하다. 전처리 공정은 바이오에탄올을 생산하는 당화 및 발효공정의 효율 및 반응시간 단축에 기여하며, 특히 섬유소 기질일 경우에는 필수불가결한 공정이다. 전처리 공정은 물리적, 화학적, 생물학적 방법으로 나누어지며, 이러한 방법들 중 기질의 특성과 처리효율에 따라 기술들을 병합하여 사용하기도 한다. 이에 본 연구에서는 산 처리, 암모니아 처리, 과산화수소 처리 및 효소를 이용한 생물학적 처리를 단독 또는 병행하여, 전환된 당 성분 및 함량을 조사함으로서 섬유소계 기질인 채소 음식물류 쓰레기를 대상으로 바이오에탄올을 경제적으로 생산하기 위한 적합한 전처리법을 검토하였다. 전처리 방법별 당화율을 살펴보면, 산 처리와 암모니아-과산화수소-계면활성제 처리가 각각 65.3 % 및 65.7 %로 가장 높았으며, 과산화수소 처리는 16.2 %로 가장 낮았다. 반면 전처리 공정 없이 효소를 이용한 당화만을 실시한 경우에는 4.3 %의 낮은 당화율을 나타내었다. 섬유소계 기질의 전처리 효율을 향상시키기 위해 첨가하는 계면활성제의 효과는 암모니아-과산화수소 및 암모니아-과산화수소-계면활성제 처리의 당화율을 비교한 결과, 뚜렷한 효과를 확인할 수 없었다. 전처리 방법별 당의 성분 및 함량을 비교한 결과 육탄당은 암모니아-과산화수소-계면활성제 전처리에서 가장 많이 검출되었다. 오탄당은 산 처리 후 그 함량이 현저히 높았으며, 오탄당 중 xylose의 함량이 60.49 mg/g로 가장 많이 차지하고 있었다. 이 결과로부터 전처리 방법에 관계없이 당화율은 유사한 수준을 보이지만, 당화된 당의 성분 및 함량에는 큰 차이가 있음을 알 수 있었다. 이당류의 경우 과산화수소 및 암모니아-과산화수소 처리를 제외한 나머지 전처리 방법에서 유사한 수준을 나타내었다. 암모니아 처리 및 과산화수소 처리를 순차적으로 병행한 암모니아-과산화수소 처리에서는 각각의 처리시보다 육탄당의 함량은 증가하였으나 암모니아 처리시보다 이당류의 함량은 감소한 것으로 나타났다.

• Journal of Life Science
• /
• v.21 no.1
• /
• pp.134-140
• /
• 2011

One hundred forty five bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in the Daejon area. Among these colonies, one bacterial strain was selected for this study based on its low surface tension ability, and this selected bacterial strain was identified as Pseudomonas sp. Z1 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. Z1 showed a high resistance to antibiotics such as chloramphenicol and ampicillin, as well as heavy metals such as lithium, manganese, and barium. It was found that the optimal pH and temperature for biosurfactant production of Pseudomonas sp Z1 were pH 6.0-7.0 and $30^{\circ}C$, respectively. After ten hours of inoculation, the biosurfactant activity of the culture broth decreased rapidly, and had maximum surface tension (28 dyne/cm) after twenty-one hours incubation. The biosurfactant activity of the culture broth was also decreased up to 2% NaCl concentration.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.556-557
• /
• 2001

This study was performed to improve the efficency of production of biosudactant which were produced by newly screened MNNGCN-Methyl-N-Nitro- Nitrosoguanidine) mutagenized P. aeruginosa EMS1. A culture grown exponentially for $30^{\circ}C$ in trypic soy brotb is adjusted to pH. MNNG is added and incubated in water bath shaker at about 250 ${\sim}$300rpm. After 20 min, is dilutecl into colded trypic soy broth and centrifugation. The cell pellet is resuspended in 50$m{\ell}$ of trypic soy broth. Cultures are grown at $30^{\circ}C$ overnight. cetyltrimethylammonium bromide-metbylene blue agar plate selected dark blue halo colony. Peanut oil, Castor oil, Olive oil, and so on were compared as carbon source of surface tension and emulsifying activity.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.511-517
• /
• 1998

Temperature and pH conditions were studied for an effective biosurfactant production by Pseudomonas aeruginosa YPJ-80. Efficient methods of biosurfactant separation were also investigated. pH-uncontrolled experiments at 35$^{\circ}C$ and an initial pH of 8 resulted in the best cell growth (3.6 g/L) and biosurfactant production (0.073 g biosurfactant/g cell). Biosurfactant separation was most efficient using solvent extraction with chloroform/methanol (2:1 vol%) followed by acidification using 1N HCl.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.102-106
• /
• 1992

Effects of nitrogen souses and C/N ratio were investigated on the production of extracellular microbial surfaclant, sophorolipid, from C. bombiocola. Organic nitrogen sources, such as urea, peptone and yeast extract was found to be more effective for sophorolipid production, than inorganic nitrogen sources. Depending on the nitrogen sources, sophorolipid production pattern varied by increasing C/N ratio. Increased production of sophrolipid could be obtained up to 90g/L by feeding carbon source again 2 days after cultivation.