• Korean Journal of Optics and Photonics
• /
• v.30 no.1
• /
• pp.8-14
• /
• 2019

This paper presents methods to correct and evaluate the chromatic aberration occurring on the cut-off line of a headlamp without additional optical components and alignment process. To correct the chromatic aberration using a geometrical concept, the maximum differences in exit-ray angle between wavelengths are reduced by tilting the convex surface of an aspheric projection lens. To evaluate the chromatic aberration, the position and luminous intensity to be measured are suggested, and the criterion for chromatic aberration is presented through color coordinates. From the evaluation of an automotive headlamp designed using this geometrical method, it is found that the chromatic aberration of the cut-off line is significantly reduced.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.13-18
• /
• 2018

In this study, we present a symmetry graphical method to design an achromatic optical system composed of many lenses on an achromatic glass map. To take into account the lens spacing and the number of lenses, we use the relative ratio of paraxial ray height at each lens and the concept of an equivalent single lens. Converting an arbitrary optical system into various doublet systems, the most effective doublet is then selected to correct the color aberration, through material selection and the redistribution of the optical power. By designing a fisheye lens using this approach, an achromatic optical system is effectively obtained over the visible waveband.

• Korean Journal of Optics and Photonics
• /
• v.26 no.4
• /
• pp.217-225
• /
• 2015

This paper shows the best selection and combination of glass in lens design, to correct a chromatic aberration using achromatic and apochromatic conditions. Using this research result, we have designed a telecentric lens for machine vision in the full range of visible light. We obtain good optical quality in the form of a quite small RMS wavefront error of $0.057{\lambda}$ in the super-broadband wavelength range 380 nm -780 nm. This result is better than that for a common telecentric lens in the visible wavelength range 486.1-656.2 nm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.119-126
• /
• 2013

In this paper, we propose a chromatic aberration removal algorithm in image capture devices, which considers local properties of the image. Chromatic aberration is generated by the fact that the refractive index of the lens is different for different wavelengths, which produces color artifacts on strong edge due to misalignment of RGB channels. Under the characteristics of the artifacts, the proposed algorithm first estimates the regions with the apparent color artifacts as the neighborhoods of the strong edge. In the regions, the proposed algorithm removes the color artifacts by matching the edges of RGB channels. The widely used conventional methods based on global image warping could not remove the color artifacts of longitudinal chromatic aberration and purple fringing identified by the image sensor, whereas the matching process of the proposed method could reduce them. Experimental results show that the proposed algorithm outperforms the conventional methods on objective and subjective criteria.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.212-213
• /
• 2001

본 논문에서는 마이크로디스플레이용 광학계의 렌즈 설계와 시뮬레이션으로 구면수차, 비점수차, 왜곡, 색수차를 보정하여 설계한 광학계의 성능 평가를 소개하고자 한다.

• The Optical Journal
• /
• s.172
• /
• pp.37-41
• /
• 2017

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.270-271
• /
• 2003

lens를 통과하는 두 광선(paraxial ray, marginal ray)이 lens의 축이나 focal plane과 만나는 지점이 서로 일치하지 않을 때, 두 개의 서로 다른 교차점 사이의 거리나 높이를 종, 횡 구면수차 (Lateral, Longitudinal Spherical aberration)이라 한다. 수차의 크기는 lens의 굽어짐 (bending)형태에 따라 달라지는데 3차 근사 lens 공식으로 유도한 식은 다음과 같으며, 그 결과의 그래프는 그림.1 과 같다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.512-518
• /
• 2001

In this paper, the geometrical properties of the optical system for Head Mounted Display (HMD) were investigated. Also, this work deals with the concept for an optical system design bated on Diffractive Optical Elements (DOE). In designing the optical system for HMD, it is considered that the optical system should have compact, high performance, and comfortable properties while user sees the picture. In order to satisfy these requirements, we applied DOE and aspheric surfaces to the lens so that correction of color and monochromatic aberrations could be obtained. Also, the design and evaluation for the optical system were carried out using the generalized model of the human eye. Finally, it was expected to fulfill all the requirements of an HMD system.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.252-259
• /
• 1994

The method of calculating overlap dispersion caused by group velocity mismatch between uv and visible pulses in ultrafast pump-probe experiments is presented to discuss limitations of the time resolution and signal intensity. The calculations show arrangements using a single focusing lens shall result in undesirable time resolution and low signal intensity. Achromatic doublets result in unrealistic solutions. However, dramatic improvement in the time resolution and signal intensity is expected in the optical arrangements using separate lens for each pulse and in the arrangements using a cutoff secondary lens with a main lens. lens.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.36-45
• /
• 2006

In this paper, multiview calibration system for an effective 3D display is proposed. This system can be obtain 4-view image from multiview camera system. Also it can be rectify lens and camera distortion, error of bright and color, and it can be calibrate distortion of geometry. In this paper, we proposed the signal processing skill to calibrate the camera distortions which are able to take place from the acquisited multiview images. The discordance of the brightness and the colors are calibrated the color transform by extracting the feature point, correspondence point. And the difference of brightness is calibrated by using the differential map of brightness from each camera image. A spherical lens distortion is corrected by extracting the pattern of the multiview camera images. Finally the camera error and size among the multiview cameras is calibrated by removing the distortion. Accordingly, this proposed rectification & calibration system enable to effective 3D display and acquire natural multiview 3D image.