• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.618-622
• /
• 2009

Ripened Rubus coreanus Miquel harvested at Gochang was stored for 8 months at $-20{\pm}2^{\circ}C$, and quality changes were investigated at intervals of 2-3 months. Soluble solid concentration increased slightly, but acidity fell during frozen storage. The lightness (L value) and red color index (a value) of ripened R. coreanus Miquel decreased during storage. The vitamin C and ellagic acid contents were 30.79 mg/100 g and $155.12\;{\mu}g/100\;mg$ mg before storage, respectively, but fell to 17.03 mg/100g and $140.11\;{\mu}g/100\;mg$ after 8 months of storage. However, the total anthocyanin content was 39.45 mg/100 g before storage, and this remained unchanged from 2 to 8 months of storage.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.4-4
• /
• 2011

본 연구에서는 해도형 나일론 극세사 제품의 알칼리 용출 및 염색특성에 대한 고찰과 인공피혁, 스웨이드 조직 편물 등의 목적으로 함께 쓰이게 될 폴리우레탄과의 혼방 제품의 염색성 향상에 대한 연구를 진행하였다. 먼저, 해도형 나일론 극세사의 알칼리 용출거동을 확립하기 위해 NaOH 농도 및 온도에 따른 감량 특성을 확인하였으며, Red 색상의 산성염료와 반응성 염료 타입에 따른 염색특성 및 세탁 견뢰도 등을 고찰하였다. 또한, 폴리우레탄의 염착성을 향상시키기 위해 폴리우레탄 합성시 고분자 말단에 아민기를 함유하는 시료에 대한 염색성을 고찰하고, 폴리우레탄 함침 소재로서 쓰이는 인공피혁을 제조하여 염색 특성을 알아보았다. 해당 연구를 통하여 다음과 같은 결과를 얻을 수 있었다. 해도형 초극세사의 알칼리 용출의 경우 $90^{\circ}C$에서 30분 유지시키는 것이 가장 적절한 조건이었으며, pH에 따른 염색성의 경우 레벨링 타입 염료와 반응성 염료의 경우 4~5, 밀링 타입과 함금속 염료의 경우는 5~6정도의 pH에서 우수한 염색성을 나타내었다. 산성염료의 경우 염색온도와 시간이 증가함에 따라 초극세사에 염착된 염료들은 이면의 일반 나일론사로 이동하는 현상이 증가하였지만 반응성 염료의 경우는 이러한 이염 현상이 나타나지 않았다. 한편, 농도가 증가함에 따라 산성염료는 우수한 빌드업성을 나타내는데 반해 반응성 염료는 4% owf이상에서는 염착량이 증가하지 않았으나, 세탁 견뢰도의 경우 반응성 염료로 염색된 시료가 가장 우수한 견뢰도를 나타내었다. 그리고 앞선 모든 염색실험에 있어서 일반 나일론사보다는 초극세사의 염착률이 더 높았고, 겉보기 색농도는 낮게 나타나는 현상을 확인할 수 있었다. 한편, 나일론/폴리우레탄 혼방제품에서 쓰이는 일반적인 폴리우레탄(RPU)과 아민 함량이 높은 폴리우레탄(APU)의 염색성을 알아본 결과 APU의 염색성이 훨씬 우수하였고, RPU에서 나타나는 현상인 염색의 진행에 따른 염료의 탈리가 나타나지 않았으며 견뢰도 또한 우수하였다. 인공피혁의 염색에서는 함침에 사용된 폴리우레탄 수지의 구조에 따라 염색성이 달라지는 현상을 확인하였으며, 특히 반응성 염료를 사용할 경우 인공피혁에서 일반적으로 문제가 되는 견뢰도 저하의 현상이 나타나지 않았다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.77-81
• /
• 2014

This paper propose a method to detect moving object and locating in real time from video sequence. first the proposed method extract moving object by differencing two consecutive frames from the video sequence. If the interval between captured two frames is long, it cause to generate fake moving object as tail of the real moving object. secondly this paper proposed method to overcome this problem by using doppler effects and HSV color model. finally the object segmentation and locating is done by combining the result that obtained from steps above. The proposed method has 99.2% of detection rate in practical and also this method is comparatively speed than other similar methods those proposed in past. Since the complexity of the algorithm is directly affects to the speed of the system, the proposed method can be used as low complexity algorithm for real time moving object detection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.115-123
• /
• 2002

In this paper, we present two types of vision algorithm that mobile robot has CCD camera. for obstacle avoidance and path plan. One is simple algorithm that compare with grey level from input images. Also, The mobile robot depend on image processing and move command from PC host. we has been studied self controlled mobile robot system with CCD camera. This system consists of TMS320F240 digital signal processor, step motor, RF module and CCD camera. we used wireless RF module for movable command transmitting between robot and host PC. This robot go straight until 95 percent filled screen from input image. And the robot recognizes obstacle about 95 percent filled something, so it could avoid the obstacle and conclude new path plan. Another is complex algorithm that image preprocessing by edge detection, converting, thresholding and image processing by labeling, segmentation, pixel density calculation.

• Food Science and Preservation
• /
• v.6 no.4
• /
• pp.481-487
• /
• 1999

This study was determined to change in chemical composition of Mume(Prunus mume Sieb. et Zucc) fruits during maturation. There were no differences in the soluble solid and moisture content among varieties, but the soluble solid slowly increased with maturing. The pH and ash content were slightly decreased with maturation. The green color of 'Nanko' fruits was maintained for 92days after full bloom at the greeness value of -3.81 Whereas, the chlorophyll content of 'Koume' fruits remarkably decreased and it was not suitable for the processing of immature green Mume fruits. The titratable acidity increased during maturation. The organic acids were mainly composed of malic acid and citric acid. The malic acid was significantly decreased during maturation, whereas citric acid increased. Major free sugars and sugar alcohols were sucrose, glucose, fructose, sorbitol and maltose. Sucrose content increased as the maturity proceeded, whereas glucose and sorbitol were decreased. The total contesnt of free amino acids decreased with maturation and the total free amino acids in the flesh of fruits were occupied by asparagine at the range of 60 to 78%.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.85-89
• /
• 2003

This study was carried out in order to investigate the sensory characteristics and nutritional analysis of sherbet ice-cream and ice-bar with mulberry fruits. In the sensory characteristics, sherbet ice-cream and ice-bar with 2％ mulberry fruit extracts were revealed to have highest level on overall quality, color, texture, taste, and flavor. Content of crude protein, crude fat and crude ash were observed in higher level in 3％ mulberry fruit extracts than others. In mineral analysis, Ca and K content were the highest in sherbet ice-cream and ice-bar with mulberry fruits. Also Mg, Na, Fe and Zn content were higher level in 3％ mulberry fruit extracts than others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.124-130
• /
• 2021

Dental prosthesis translucency importantly contributes to aesthetic outcomes. The purpose of this study was to investigate the effect of drying time and zirconia coloring agent type on translucency. For the experiment, 90 circular specimens were fabricated for each zirconia block. Then, zirconia specimens were treated with a coloring agent for 180 seconds and dried for 0 seconds (undried), 30 seconds (intermediate dry), or 30 minutes (complete dry). Then, a specimen was placed on a black standard tile or a white standard tile, and using a standard D65 light source reflected was measured using the light removal method. A total of three repeated measurements were obtained per specimen. One-way ANOVA was used to compare and analyze the relationship between zirconia translucency and drying time. Zirconia and coloring liquid types were significantly associated with translucency (P < 0.001). Although no significant difference was observed with respect to drying time (P > 0.922), zirconia in the completely dried (30 minutes) state was more translucent.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.115-128
• /
• 2022

This study investigated and analyzed the symptoms of urinary incontinence and the wearing status, purchase status, and preference for urinary incontinence products in women in their 50s and older. When purchasing urinary incontinence pads and panty, waterproof function and absorption speed were recognized as important. In urinary incontinence products, the most common function was to prevent leakage, and the preferred color was skin. When the number of urinary incontinence was high, the absorption function was considered important. Size or fit was important when the amount of urinary incontinence was small, but waterproof function was found to be important when the amount of urinary incontinence increased. It was hoped that a function to prevent leakage would be added when the incidence of urinary incontinence and the amount of urinary incontinence were high, and a panty-type pad was preferred. It was analyzed that the higher the number of births, the higher the amount of urinary incontinence, and the more frequent symptoms of urinary incontinence appeared. t was found that the earlier menopause, the higher the amount of urinary incontinence.

• Industry Promotion Research
• /
• v.9 no.1
• /
• pp.13-20
• /
• 2024

In this study, we conducted a compositional analysis of five darkening shampoos available in the South Korean market and evaluated their active ingredients and safety based on the analysis results. GC-MS analysis was employed to identify the main components of each shampoo, revealing discrepancies between the detected compounds and the ingredient lists provided by the manufacturers. These differences are interpreted as being due to the limitations of the GC-MS analysis and the volatility of certain compounds. Further investigations were carried out to explore compounds potentially contributing to hair darkening. However, it was not definitively concluded that these compounds are directly involved in the hair darkening process. It is speculated that they may enhance hair care product performance and offer additional benefits to hair, or improve product texture, stability, or preservation. Additionally, the GC-MS analysis identified several compounds with potential safety concerns, necessitating caution when used as cosmetic ingredients.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.34-34
• /
• 2011

PET/면, 나일론/PET, 나일론/면 등 다양한 복합섬유소재를 염색하기 위해서는 복합섬유소재를 구성하는 각각의 섬유소재에 따라 적합한 염료를 선정하고 그에 맞는 염색방법을 사용하여 진행되고 있다. 하지만 이런 경우 색상과 견뢰도 등의 물성을 맞추기 위한 복잡한 염색공정 및 긴 염색시간에 의한 생산비용 상승 등 여러 문제점이 있다. 이러한 문제점을 해결하기 위해 하나의 염료를 이용하여 다양한 섬유를 염색하는 방법에 대한 많은 연구가 이루어지고 있다. 새로운 염료합성의 경우 섬유와 결합할 수 있는 반응기를 분산염료구조에 도입하여 염색조건에 따라 다양한 섬유를 염색할 수 있는 universal dye의 개발에 초점이 맞추어져 있다. 반응성염료와 분산염료의 특성을 동시에 만족시키기 위한 일환으로서 염료의 분자 구조 내에 상기의 염료특성을 동시에 발휘하는 소위 "반응성 분산염료"의 개발이 이에 속한다. 본 연구의 목적은 화학구조가 다른 네 종류의 sulphatoethylsulphone기를 갖는 반응성분산염료들을 합성하고 이들의 나일론, PET, 면 및 교직물에 대한 염색성을 분석하는 것이다. 면 섬유에 대한 Dye 1~4의 염색온도에 따른 염색성을 살펴보면, 각 염료들의 염색성은 염색온도에 따라 큰 영향을 받고 있음을 알 수 있으며, Dye 1, 4는 염색온도가 높을수록 K/S 값이 증가하고 Dye 2, 3은 염색온도가 낮을수록 K/S 값이 증가함을 알 수 있다. Nylon에 대한 Dye 1의 염색속도는 pH 4 > pH 5 > pH 8 > pH 7 > pH 6의 순서로 나타나 pH 6에서의 염착 평형이 pH 4보다 40분 정도 늦게 도달하였다. 나일론과 PET의 동욕염색에 있어 Dye 1은 나일론의 경우 초기부터 빠른 흡착을 보이며 $100^{\circ}C$가 되는 60분에는 K/S값이 16에 도달하여 염착 평형에 근접한 것을 알 수 있으며, PET는 $100-200^{\circ}C$ 사이에서 염색속도가 빨라지며 본격적으로 흡수하였다. N/C 교직물에 대한 Dye 2, 3의 빌드업성은 두 염료 모두 염료농도의 증가에 따라 K/S 값 역시 선형적으로 증가하는 것으로 나타났다. 나일론 섬유는 네 가지 염료로 우수하게 염색되었고, 면 섬유는 수용성기를 가진 Dye 2와 3, 그리고 PET 섬유는 소수성이 높은 Dye 1과 4가 적합하였다. N/P 및 N/C 교직물의 염색에 있어 나일론 성분으로 염료가 더 많이 흡착하여 나일론섬유가 더 진하게 염색되지만 교직물의 직물조직에 의하여 표면과 이면은 각각 거의 동색으로 보였다.