• Korean Security Journal
• /
• no.59
• /
• pp.71-90
• /
• 2019

As the demand for national security and national safety is gradually increasing in accordance with the trend of the times and social environment, and the use of private areas for effective prevention and supply required for the demand for safety services, this paper analyzed the Japanese private security testing system for the introduction of the Korea security certification system as a way to secure expertise in the private security industry and drew the following conclusion. First, certificate segmentation should be carried out according to the clearly divided field and scope of the expense operation. Second, it is necessary to distinguish the qualification of the private security qualification according to the level. Third, it is necessary to utilize the combined evaluation method through the departmental and practical tests. Fourth, an assessment should be made through the link between departments and practical subjects. Fifth, the diversity of the acquisition methods should be placed to ensure the gainer's accessibility. Finally, the use of professional and visible use of professional personnel should be achieved through benefit assessment for those who are qualified for

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.15-22
• /
• 2003

In the conventional load transfer analysis for a steel pipe drilled shaft, it was assumed that the concrete's strain is the same as the measured steel's strain and the elastic modulus of the steel and the concrete calculated by the formular as prescribed by specification is used in the calculation of pile axial load. But, the pile axial load calculation by conventional method differed to some extent from the actual pile load. So, the behavior of a steel pipe drilled shaft could not be analyzed exactly. Thus, the necessity to measure the strain for each pile component was proposed. In this study, a new approach for load transfer measurement of large diameter drilled shafts was suggested ; the strain of each pile component(i. e., steel and concrete) was measured by DRS(Deformable Rod Sensor), the elastic modulus was determined by the uniaxial compression test for concrete specimens made at test site and a value of elastic modulus was evaluated as average tangential modulus corresponding to the stress level of the (0.2-0.6)$f_{ck}$. Field application was confirmed by the results of load transfer measurement tests for 3 drilled shafts. The errors for calculated pile head load were -11 ∼16% and 3.4% separately.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.97-105
• /
• 2017

An air-burst munition is limited in space, so there is a limit on the size of the fuze and the amount of ammunition. In order to increase a firepower to a target with limited ammunition, it is necessary to concentrate the firepower on the ground instead of the omnidirectional explosion after flying to the target. This paper explores the design and verification of a ground-detection sensor that detects the direction of the ground and determines the flight-distance of an air-burst munition using a single axis geomagnetic sensor. Prior to the design of the ground detection sensor, a geomagnetic sensor model mounted on the spinning air-burst munition is analyzed and a ground-detection algorithm by simplifying this model is designed. A high speed rotating device to simulate a rotation environment is designed and a geomagnetic sensor and a remote-recording system are fabricated to obtain geomagnetic data. The ground detection algorithm is verified by post-processing the acquired geomagnetic data. Taking miniaturization and low-power into consideration, the ground detection sensor is implemented with analog devices and the processor. The output signal of the ground detection sensor rotating at an arbitrary rotation speed of 200 Hz is connected to the LED (Light Emitting Diode) in the high speed rotating device and the ground detection sensor is verified using a high-speed camera.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.2
• /
• pp.78-90
• /
• 2016

This report is to introduce detail processes during the restoration/revision project for the Korean Standard Methods for Marine Environment. The processes are composed of 3 steps: questionaries, QA/QC confirming step by CRM(Certified Reference Materials), and advisory council by specialists. The questionaries required four main topics to be included to the restoration/revision protocol: 1. the guidelines to sampling, transportation, storage, and pre-analytical procedures for the marine specimens, 2. the unified analytical method, especially for the organic compounds, 3. the QA/QC test requirement for CRM, 4. introduction of diverse analytical instruments, 5. the customer- friendly express of the protocol. Based on these new protocol, we expect two most important effects: 1, increased insurance of international credibility and equivalence by the QA/QC procedures, 2. increased conformability and representatively from wide-spread use of the protocol. Finally we suggested several residual topics remained to the inter-government cooperation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.438-443
• /
• 2000

Continuous processes using immobilized yeast were investigated in order to shorten beer maturation time. Three silica-based ceramic media and one cellulose-based medium were used. Diacetyl (DA) was one of the most distinctive compounds causing immature flavors. Heat treatment of green beer (GB) to convert a-acetolactate to DA was essential to shorten the time for beer maturation. The longer heat treatment time was needed at the lower temperature. Oxygen concentration in GB had a large influence on the conversion of a-acetolactate to DA. The lower the oxygen concentration in GB, the lower conversion ratio to DA. Heat treated GB was fed continuously to four kinds of immobilized yeast columns. DA concentration after immobilization columns was reduced to less than 0.1ppm at $3∼5^{\circ}C$ 180∼150 minutes retention time in all columns tested. This concentration is enough to fit the quality speification of commercialized product. Formation of a-acetolactate from residual sugars was higher in ceramic media column than cellulose media cloumn. The taste of beers from test processes were not the same as that of traditionally produced beer, but no off-flavors were detected in test samples, which shows that immobilized yeast columns have potentials as rapid processes for beer maturation.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.413-420
• /
• 2018

Purpose : We present a novel method for the analysis of blue light applied by the analysis method of David L. with optical experiment and blue light by measuring the transmittance by dividing it by the refractive power in the spectacle lens made by MR8. Methods : The lenses of -8.00D, -7.00D, -6.00D, -5.00D, -4.00D, -3.00D, and 0.00D manufactured by MR8 being sold in the market, were selected. The transmittance was measured at the intervals of 5 nm from 200 to 1000 nm with UV-VIS Spectrophotometers (SolidSpec 3700), and they were in range of the blue light (380 to 500 nm) analyzed by a David L.'s analysis method. Results : All of the MR8 lenses selected for this study almost completely blocked at the UV range. A lens of -8.00D was measured as the lowest transmittance of 59.56% in the blue light area and low values were measured at the blue areas 1 and 2 according to the analysis of David L.In the infrared ray area, the transmittance of all lenses gradually decreased. The average value of the luminous transmittance was 23.67% ~ 26.33% and then gradually decreased from -4.00D. Conclusion : Applying the analysis of David L., a minimum of 41.28% and a maximum of 46.60% were measured at the blue light 1 area and a minimum of 87.30% and a maximum of 97.55% were measured at the blue light 2 area. A minimum of 86.83% and a maximum of 96.55% were measured at the blue light 3 area, and the average was 94%. The luminous transmittance of the -3.00D lens was 26.33%, which was the highest, and that -8.00D was 23.67%, which was the lowest.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.552-563
• /
• 1999

The study investigated and analyzed the middle school student's science textbook learning methods and strategies. The Preferred Mehtod of Study (PMOS) and a clinical interview method were utilized. Results indicate that there is a meaningful and significant positive correlation between the number of times students read a chapter of the science textbook and their science grade point. Students do not tend to alter learning strategies dependent upon the subject matter studied, but easily alter stratgies dependent upon the types of the test. Most students could not construct "organiztional tools" such as a summary, a chart, a talbe, or a figure when they study textbook, but might pursure and prefer only one method when they choose their learning strategise. Very few students (less than 1%) among those queried consciously try to connect between prior knowledge and new concepts in the textbook. Even though students choose the textbook for learning science in the beginning, they prefer to stick to reference and exercise materials. Therefore, detailed and direct studise of the student's learning methods and strategies, as well as research on cognitive psychology and motivational psychology, are necessary in order to develop a new textbook with student-based learning materials. By understanding the student's konwledge level through investigation of his or her learning style, an effective science education program can be realized. Finally, the role of the textbook as a tezching/learning material can be maximized by investigating and understanding the student's learning method and strategy with emphasis on reciprocal action between textbooks.

• School Mathematics
• /
• v.5 no.4
• /
• pp.507-520
• /
• 2003

본 연구는 실질적인 의미에서 학생들로 하여금 수학을 더 잘 이해할 수 있도록 돕기 위해 테크놀로지를 학교 교실에서 직접 활용하는 방안에 대한 연구이다. 특히 여기서는 수학을 가르치고 배우는 과정에서 가상학습체계가 주요한 도구로서 적용되었다. 내용은 무게중심을 택했고 12명의 중학생을 대상으로 현직교사가 직접 지도하였다. 학생들은 수업초기에 교사에 의해 소개되는 학생중심 학습활동에 강한 관심과 호기심을 보였고 집중력이 아주 강했다. 전통적인 수업방식과는 달리 학생들이 참여하였고 테크놀로지를 이용하여 전통적인 방식의 교실에서 할 수 없었던 수업의 시작은 학생들의 호기심을 자극하는데 충분하였다. 전반적으로 테크놀로지 환경에서의 수업을 선호하였지만 아직 전통적인 방식인 칠판과 분필을 이용한 수업을 선호한 학생들도 있었다. 새로운 변화도 좋지만 새로운 환경에 친화적이지 않거나 테크놀로지를 이용한 수업의 빠른 진행이 학생을 오히려 혼란하게 만들기도 하였다. 마지막으로 교사는 가상학습체계를 교실에서 활용함에 있어서 현 교육과정과 교과서를 크게 개혁하지 않아도 잘 준비되고 계획된 테크놀로지의 활용에 대한 잠재력을 확인할 수 있었다. 우리는 현재 테크놀로지의 보급에 비해 그 활용도가 낮다는 것을 잘 알고 있고 기타 입학시험이라는 현실이 교육과정과 학습방법의 개혁을 현실적으로 추진하는 것이 어려운 일임을 잘 알고 있다. 그래서 현 상황에서 테크놀로지의 사용을 가능하게 할 수 있는 방법을 모색하였다. 이미 보급된 테크놀로지와 교사와 학생의 테크놀로지에 대한 이해가 앞으로 그 잠재력을 갖고 있다고 확인하였다.보다 낮은 일반세균수 값을 보여주었다. 봄철 시료에 있어서 소규모 도계장은 본 냉각 후 도계과정을 제외하곤 모든 도계공정 단계에서 대규모 도계장보다 높은 일반 세균수의 측정값을 보여주었다. 봄철 시료의 냉각말기의 냉각수 일반세균수는 소규모 도계장이 대규모 도계장보다 높은 측정값을 보여주었다.주었다.다.㏖/s/$m^2$에서는 이앙후 각각 18일로 두 품종 모두 늦어, 약광은 유묘기에 분화되었던 분얼아를 휴면으로 유도할 수 있음을 시사하였다. 4. 유효경비율은 1220~220 $\mu$㏖/s/$m^2$에서 다산벼는 47~55%, 화성벼는 100~72%로 다산벼가 화성벼보다 낮았다. 이것은 다산벼는 무효분얼이 많다는 것을 시사하는 것으로 품종 육성시 유효경비율을 높여야 할 것이다.타났고, \circled2 회복상태에서, 10 lu$\chi$인 경우 서간에 1.26 $\mu\textrm{V}$, 야간에 1.59 $\mu\textrm{V}$였고, 100 lu$\chi$인 경우 서간에 2.63 $\mu\textrm{V}$ 야간에 3.65 $\mu\textrm{V}$였으며, 400 lu$\chi$인 경우 서간에 2.52 $\mu\textrm{V}$, 야간에 3.67 $\mu\textrm{V}$로 나타났다.히, 흉선, F냥, 비장 등의 림프구에 초기 세포용해성 감염을 일으키는데, B

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.7-14
• /
• 2006

Entomopathogenic fungus Cordyceps militaris is famous for its medicinal efficacies. It has been reported to have various pharmacological activities such as anti-tumour, insecticidal, antibacterial, immunomodulatory and antioxidant. In this study, we investigated the effect of the extract of C. militaris (MPUN8501), which was identified by the analysis of the nucleotide sequences of 5.8S ribosomal RNA, on the function of liver. C. militaris powder was extracted using hot water extracts method as time, volume and temperature and using method as differential polarity of organic solvent. Each fraction was tested for the improvement of hepatic enzyme alcohol dehydrogenase (ADH) and acetaldehyde dehydrogenase (ALDH) activity. The BuOH extracts (CME) had highest activity which was used for the test of toxicity and efficacy of C. militaris. The enhancing effect of CME on the activity of ADH and ALDH was much more than medicine, drink, natural tea etc. Thus CME promoted the resolution of alcohol and acetaldehyde in rats, inducing recovery to normal condition rapidly. Furthermore, oral administration of CME effectively protected the carbon tetrachloride-induced acute hepatic injury as revealed by the hematological parameters (levels of sGOT and sGPT) and histological observation. CME was ascertained to be safe by regulatory toxicity studies of single dose toxicity and genotoxicity. These results suggest that CME would be useful for the maintaining normal hepatic activity as a functional health food.